------=_NextPart_000_0036_01BE5FFE.49D154E0
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
Thanks abunch.
Carolyn
----- Original Message -----=20
From: Geoffrey L. Scully=20
To: ntisp@iea-software.com=20
Sent: Wednesday, February 24, 1999 1:49 PM
Subject: Re: [NTISP] Total control DSP modem problem
Just Telnet in.=20
Carolyn Smith wrote:=20
Were do I enter this command at. In the TCM or do I use the =
console method. Carolyn=20
----- Original Message -----=20
From: Geoffrey L. Scully
To: ntisp@iea-software.comSent: Wednesday, February 24, 1999 1:35 =
PMSubject: Re: [NTISP] Total control DSP modem problem
set chassis slot "#" type hdm_24 owner yes ports 24=20
This makes sure the particular slot is set up for Hiper DSP 24 =
ports=20
Carolyn Smith wrote:=20
Hello, I have one USR Total Control unit with 4 Hiper dsp =
cards(nodem cards) installed. The fourth card was the last installed and =
it has given us problems ever since. I had the card replaced but the =
problem is still somewhat there. The problem is that one of the modems =
(#24) has not been used since we installed the card. It is also =
returning the error of "pk bus generic error" in the TMC as the reason =
for call failure. I thought it might be because I use Channelized t1's =
but all the other cards modems never return this error. I also checked =
in my Hiper Arc Router mgr. software and found that the modem card is =
only returning 23 modems as being up. Does anyone out there use this =
same equipment and have any ideal what could be causing this problem? =
ThanksC. Smith
------=_NextPart_000_0036_01BE5FFE.49D154E0
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
=HTML>------=_NextPart_000_0036_01BE5FFE.49D154E0------- Original Message -----=20From: Geoffrey L. =Scully=20Sent: Wednesday, February 24, 1999 1:49 PMSubject: Re: [NTISP] Total control DSP modem =problemJust Telnet in.=20Carolyn Smith wrote:=20
Were do I enter this =command=20 at. In the TCM or do I use the console =method. Carolyn=20----- Original Message -----=20set chassis slot ="#" type=20 hdm_24 owner yes ports 24=20From: =Geoffrey =L.=20 ScullyTo: ntisp@iea-software.comSent:=20 Wednesday, February 24, 1999 1:35 PMSubject: Re: [NTISP] =Total=20 control DSP modem problemThis makes sure the particular slot is set up for Hiper DSP 24 =ports=20
Carolyn Smith wrote:=20
Hello, I have one USR =Total Control=20 unit with 4 Hiper dsp cards(nodem cards) installed. The fourth card was the last installed and it has =given us=20 problems ever since. I had the card replaced but the =problem is=20 still somewhat there. The problem is that one of the =modems (#24)=20 has not been used since we installed the card. It is also=20 returning the error of "pk bus generic error" in the =TMC as=20 the reason for call failure. I thought it might be because =I use=20 Channelized t1's but all the other cards modems never return =this=20 error. I also checked in my Hiper Arc =Router mgr.=20 software and found that the modem card is only returning 23 =modems as=20 being up. Does anyone out there use this =same=20 equipment and have any ideal what could be causing this =problem?=20 ThanksC.=20Smith