DEFAULT Password = "ANY"
Framed-Protocol = 1,
User-Service = 2,
Framed-Routing = 0,
Framed-Address = 255.255.255.254,
Framed-MTU = 1500
Regards, Pablo
-----Original Message-----
From: Garcia Melga Pablo
Sent: Thursday, November 04, 1999 6:24 PM
To: 'radiusnt@iea-software.com'
Subject: RE: [RadiusNT] authenticate anyone
Hi Stephen I have the same scenario my config is
DEFAULT Password = "ANY"
Framed-Protocol = PPP,
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-MTU = 1500
I hope this works for you.
Regards, Pablo
-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of Stephen Johnson
Sent: Thursday, November 04, 1999 5:28 PM
To: IEA Software
Subject: [RadiusNT] authenticate anyone
I am trying to set up the users file to authenticate anyone. This is my
default user entry:
DEFAULT Password = "ANY"
User-Service = 2,
Framed-Protocol = PPP,
Framed-Address = 255.255.255.254,
Framed-Netmask = 255.255.255.255
These are the errors I receive when trying to connect using this users file:
Thu Nov 04 09:50:54 1999: Authenticate: from 208.180.11.249 - Neither User
Nor Default Name: beckers
Thu Nov 04 09:51:04 1999: Authenticate: from 208.180.11.250 - Neither User
Nor Default Name: Default
What am I missing?
Stephen
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart