Are you saying that the user's record still appears in the online tab,
or that the user must initiate the disconnect? If the user must
initiate the disconnect, that is to be expected. The RADIUS protocol
does not allow a RADIUS server to send interactive commands to the NAS
once the user is connected - it can only send information at the start
of the session instructing the NAS in how to handle that user. The
"clear" button is there for you to clear any entries in the online table
that for some reason weren't cleared when the user disconnected (for
example, if the NAS lost its connection with the RADIUS server and
didn't send the stop record to it). This prevents RadiusNT from
rejecting a user's login because it thinks the user is already online.
If the "clear" button does not remove the entry from the online tab,
which version of the Emerald client are you using?
Emad Hazza wrote:
> Thankyou it is working now, I have aquestion , if a plane is defined to allow access during certian hours on a certain port, when the time is up, will the raduis clear the user who is still logged on. or do I have to go and clear the user manually. The problem I am facing now is that when I clear any user from the online tab the session doesnot cleared until the user himself ends his session.
> -----Original Message-----
> From: David Routh [SMTP:email@example.com]
> Sent: 25 ??CI? C?EC??E, 1420 02:42 ?
> To: firstname.lastname@example.org
> Subject: RE: [RadiusNT] fixed hours plan
> At 02:19 PM 10/5/1999 +0200, you wrote:
> >Server port access on the radius admin is nothing but a blank page, I
> don't if this is a bug during upgrade
> >so it cannot be used to define the time range. Can anybody suggest something
> Here's what I was told:
> > Nothing is in "Server Port Access"... it's a blank screen...
> if you are not using server port access, then turn it off in the
> RadiusNT admin. A newer Emerald admin will clear up the blank
> tab problem:
> For more information about this list (including removal) go to:
> Part 1.2 Type: application/ms-tnef
> Encoding: base64
For more information about this list (including removal) go to: