Here is a user with the values in the value column -
allmakes Password = "******", Expiration = "Nov 01 1999"
Framed-Protocol =
Framed-Netmask = 255.255.255.255
NAS-Port-Type =
Framed-Address = 196.22.172.15
User-Service =
Here is the same user with the values in the data column -
allmakes Password = "******", Expiration = "Nov 01 1999"
Framed-Protocol = 1
Framed-Netmask = 255.255.255.255
NAS-Port-Type = 0
Framed-Address = 196.22.172.15
User-Service = 2
Will an update be available ?
Regards,
Graeme
---Graeme Slogrove, BSc (Eng) Elec (Wits)Director, Systems Development & Value Added ServicesNetActive InternetTel: 011-719-0333 Fax: 011-719-0444Support: 011-719-0300
-----Original Message-----From: Dale E. Reed Jr. [mailto:daler@iea-software.com]Sent: 18 September 1999 04:53To: radiusnt@iea-software.comSubject: Re: [RadiusNT] Strange return attributes
Graeme Slogrove wrote:> > I have some strange return values showing when I run radius -x15. Note how> the User-Service, Framed-Protocol, Framed-MTU and NAS-Port-Type all havethe> same values.> > Any ideas anyone ?> > ------> > SQL Statement: RadGetConfigs 29254> > SQL Statement: RadGetATConfigs 'GOLD'> > Sending Ack of id 244 to c416a064 (appm4-1)> Framed-Netmask = 255.255.255.255> User-Service = 20507112> Framed-Protocol = 20507112> Framed-Address = 255.255.255.254> Framed-MTU = 20507112> NAS-Port-Type = 20507112> Resp Time: 360 Auth: 19/2 -> 21 Acct: 1/0/0 -> 2>
Are you putting the number in the data or value column? I'mguessing that you are putting the number into the data column,but for numbers, you need to put it into the value column.The data column is used by string and IP type attributes only.
--Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com
For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart