Re: [RadiusNT] AcctStatusType and ODBC mode

Dale E. Reed Jr. ( (no email) )
Thu, 09 Sep 1999 09:33:59 -0700

Ross McNab wrote:
>
> I've tried this, but RadiusNT doesn't seem to even compose an insert
> statement for the accounting-start/stop messages. Messages with standard
> Start/Stop AcctStatusTypes are logged to the DB with no problems. I enclose
> the debug output generated by an ascend rebooting below. Any ideas?

And it won't in the case of Accounting-On and Accounting-Off record
types, which are what the below (7 and 8) are.

> radrecv: Request from host c3d80e15 code=4, id=3, length=49
> NAS-IP-Address = 195.216.14.21
> Acct-Status-Type = 8
> Acct-Delay-Time = 0
> Acct-Session-Id = "919991645"
> Sending Accounting Ack of id 3 to c3d80e15 (testascend)
> Resp Time: 0 Auth: 0/0 -> 0 Acct: 0/0/0 -> 1
>
> radrecv: Request from host c3d80e15 code=33, id=1, length=32
> NAS-IP-Address = 195.216.14.21
> Received unknown attribute 150, vendor 0
> Resp Time: 0 Auth: 0/0 -> 0 Acct: 0/0/0 -> 1
>
> radrecv: Request from host c3d80e15 code=4, id=2, length=49
> NAS-IP-Address = 195.216.14.21
> Acct-Status-Type = 7
> Acct-Delay-Time = 0
> Acct-Session-Id = "919994245"
> Sending Accounting Ack of id 2 to c3d80e15 (testascend)
> Resp Time: 0 Auth: 0/0 -> 0 Acct: 0/0/0 -> 2

-- 

Dale E. Reed Jr.      Emerald and RadiusNT__________________________________________IEA Software, Inc.    www.iea-software.com

For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart