Re: [RadiusNT] fixed IP & SQL 7
Dale E. Reed Jr. ( (no email) )
Wed, 08 Sep 1999 09:54:11 -0700
Pietro Risso wrote:
>
> Hi
> we are using radiusnt 2.5.175 with a SQL 7 and a Cisco AS5200.
> We need to assign static IP addresses so we have put in RadConfigs:
>
> RadConfigID,AccountID,RadAttributeID,RadVendorID,RadVendorType,Data,Value,Ra
> dCheck
> 2,1,6,0,0,"User-Service",2,0
> 3,1,7,0,0,"Framed-Protocol",1,0
> 4,1,8,0,0,"x.x.x.x",0,0
> 5,1,27,0,0,"Session-Timeout",7200,0
> 8,1,9,0,0,"255.255.255.0",0,0
>
> This doesn't work.
> From the debug logs of RadiusNt and the AS 5200 we see that every time the
> attribute 8
> is passed with a value of 0.0.0.0 while the framed-netmask (attribute 9) is
> passed correctly.
> We have done the same with an access 97 db and in this case everything
> works.
I'm guessing your dictionary has an incorrect entry for #8. Make sure
the type for RadAttributeID #8 in the RadAttributes table is 2 (IP
Address)
and not 1 (int, which would read the 0 from the Value column).
--
Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com
For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart