Thanks,
Josh
----- Original Message -----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: <radiusnt@iea-software.com>
Sent: Thursday, August 26, 1999 12:18 PM
Subject: Re: [RadiusNT] SNMP concurrency checking
> Josh Hillman wrote:
> >
> > For all of our Maxes (40xx T1/PRI):
> > Servers.ServerType = 5
> > Servers.SNMPType = (null)
> > Example SNMPUser for one of our Maxes (port 10101):
> > .1.3.6.1.4.1.529.12.3.1.4.10102
> > Why is this ...10102 and not ...10101? I see the "port+1" portion of
the
> > update script, but don't understand why the +1 is there.
>
> With a max, you do NOT specify a port on the SNMPUser (notice there is
> not .x in the table, it just ends with a .(dot)). The server type of
> 5 tells RadiusNT to append the AcctSessionID to the SNMPUser before
> making the SNMP request.
>
> > The radlogin results displayed only the following info for a user that
was
> > known to already be online:
> >
> > Checking Radius user jon:
> > Reply-Message = "User: test already logged onto system 1 time(s)."
> > Good: 0 Bad: 1 T/O: 0 Avg: 30
> >
> > Radius -x18 displayed the following info for the same user. All the
> > preceding options settings are listed further below.
> >
> > radrecv: Request from host 7f000001 code=1, id=183, length=55
> > Sending Reject of id 183 to 7f000001 (localhost)
> > User: test already logged onto system 1 time(s).
> > Resp Time: 70 Auth: 0/1 -> 1 Acct: 0/0/0 -> 0
> >
> > The preceding info...
> > C:\radius>radius -x18
> >
> > RadiusNT 2.5.175 Copyright (c) 1995-1998 IEA Software, Inc.
> > All Rights Reserved, Worldwide
> >
> > Some portions Copyright (c) 1992 Livingston Enterprises, Inc.
> > and Copyright (c) 1995 Ascend Communications, Inc.
> >
> > 0) Mode: 1
> > 1) IgnoreCase: 0
> > 2) TrimName: 1
> > 3) AuthPort: 1645
> > 4) ReqAcctAuth: 1
> > 5) AllowMalformed: 1
> > 6) AcctPort: 1646
> > 7) Proxy: 0
> > 8) Options: 225
> > 9) Debug: 0
> > 10) LogFile:
> > 11) AcctLogFile:
> > 12) ODBCDatasource: Radius
> > 13) Username:
> > 14) Password:
> > 15) AcctODBCDatasource:
> > 16) AcctUsername:
> > 17) AcctPassword:
> > 18) DataDirectory:
> > 19) AcctDirectory:
> > 20) UsersFile:
> > 21) CompanyName:
> > 22) License:
> > 23) IPAddress: All
> > 24) SNMP: 2
>
> There is a known bug in RadiusNT 2.5 that you MUST have stats
> enabled for the SNMP thread to start. Therefore, you need to
> enable both SNMP options, or SNMP concurrency checking will
> not work.
>
> > 25) TestDatabaseSecs:
> >
> > Initializing Winsock...
> > MS SQL Server Mode Enabled
> > MS SQL Server Mode Enabled
> > Licensed MBRs:
> >
> > Enterprise features enabled.
> >
> > RadiusNT 2.5.175 (Emerald Standard) Initialized...
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart