[RadiusNT] Problem with some users after upgrading to 2.5.175

Kelly Peterson ( netadmin@compusmart.ab.ca )
Fri, 20 Aug 1999 13:38:54 -0600

We have just upgraded to version 2.5.175 from 2.5.124. RadiusNT is not
properly authenticating everyone. Any help would be appreciated! Below
are some examples:

One not working:

radrecv: Request from host c7b98202 code=1, id=219, length=59
NAS-Identifier = 127.0.0.1
NAS-Port = 0
User-Name = "sherrex"
Password = "\370R\362{=\250\317\353\231\262\037\264Rk\265Q"
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is sherrex.98
decrypted pwd is J]T23R -
Sending Reject of id 219 to c7b98202 (monty)
Resp Time: 10 Auth: 0/1 -> 1 Acct: 0/0/0 -> 0

One working:

radrecv: Request from host c7b982b6 code=1, id=122, length=155
User-Name = "pkaminsky"
Password = "Y\021\315\322\002\004\201&\3656\333>\342\317\242E"
NAS-Identifier = 199.185.130.182
NAS-Port = 779
Acct-Session-Id = "50987128"
Received unknown attribute 38979, vendor 429
User-Service-Type = 2
Framed-Protocol = PPP
Received unknown attribute 36889, vendor 429
Received unknown attribute 36890, vendor 429
Received unknown attribute 36891, vendor 429
Caller-Id = ""
Client-Port-DNIS = ""
NAS-Port-Type = Async
Framed-Address = 209.115.205.83
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is tip&cut.49
decrypted pwd is tip&cut.49
Sending Ack of id 122 to c7b982b6 (ns21)
User-Service-Type = 2
Framed-Protocol = PPP
Framed-Address = 255.255.255.254
Framed-Netmask = 255.255.255.255
Idle-Timeout = 1800
Port-Limit = 1
Session-Timeout = 36000
Framed-Compression = Van-Jacobsen-TCP-IP
Resp Time: 10 Auth: 2/1 -> 2 Acct: 1/0/0 -> 1

One more not working:

radrecv: Request from host c7b98202 code=1, id=58, length=60
NAS-Identifier = 127.0.0.1
NAS-Port = 0
User-Name = "bhryniuk"
Password = "\007gC;\235\232Z\374\273v\255/\357\252\215A"
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is edmonton
decrypted pwd is "lMh
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart