Re: [RadiusNT] Garbage

Dale E. Reed Jr. ( (no email) )
Fri, 20 Aug 1999 10:28:22 -0700

> Ed Miller wrote:
>
> We have a person,(?) trying to dial in with Win95. When I see it on
> this end, using -x15, all I see is:
>
> radrecv: Request from host d8740196 code=1, id=69, length=121
> User-Name = "#\274\260{tj\374"
> Password = "\204\370\236\362G\276"
> NAS-Identifier = 216.116.1.150
> NAS-Port = 2
> NAS-Port-Type = Async
> User-Service = Framed-User
> Framed-Protocol = PPP
> Connect-Info = "50000 LAPM/V42BIS"
> NAS-Port-DNIS = "3022959898"
> Caller-Id = "3026519896"
> rad_authenticate_ODBC()

> User: ;#+¦{tjn Not found
> Resp Time: 471 Auth: 16/25 -> 41 Acct: 656/0/17 -> 683
>
> She said she can dial in to work so it MUST BE OUR FAULT. (sorry tuff
> to keep cool sometimes)
> She thinks she is using TCP/IP for work . There is nothing else in
> network.
> Is there a place in old version of Win95 for encryption? If so where?
> Any help and/or suggestion

I would guess there is a connection problem between her modem and
yours. Have her try to enable terminal window and see if its coming
in as junk. Maybe also try Hyperterminal.

RadiusNT only reports what the NAS sends it, and the NAS is sending
it garbage in this case. :(

-- 

Dale E. Reed Jr.      Emerald and RadiusNT__________________________________________IEA Software, Inc.    www.iea-software.com

For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart