radrecv: Request from host a200002 code=4, id=34, length=89
NAS-Identifier = 10.32.0.2
NAS-Port = 4
NAS-Port-Type = 5
User-Name = "glosatest"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
User-Service = Framed-User
Acct-Session-Id = "00000E68"
Framed-Protocol = PPP
Acct-Delay-Time = 0
SQL Statement: INSERT INTO Calls
(CallDate,NASIdentifier,NASPort,UserName,AcctStatusType,AcctSessionId,AcctDe
layTime) VALUES (GetDate(),'10.32.0.2',4,'glosatest',1,'00000E68',0)
Sending Accounting Ack of id 34 to a200002 (Ciscob)
Resp Time: 41 Auth: 0/0 -> 0 Acct: 1/0/0 -> 1
radrecv: Request from host a200002 code=4, id=35, length=131
NAS-Identifier = 10.32.0.2
NAS-Port = 4
NAS-Port-Type = 5
User-Name = "glosatest"
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
User-Service = Framed-User
Acct-Session-Id = "00000E68"
Framed-Protocol = PPP
Framed-Address = 10.38.0.1
Acct-Terminate-Cause = User-Request
Acct-Input-Octets = 3213
Acct-Output-Octets = 1045
Acct-Input-Packets = 50
Acct-Output-Packets = 24
Acct-Session-Time = 19
Acct-Delay-Time = 0
SQL Statement: INSERT INTO Calls
(CallDate,NASIdentifier,NASPort,UserName,AcctStatusType,AcctSessionId,Framed
Address,AcctTerminateCause,AcctSessionTime,AcctDelayTime) VALUES
(GetDate(),'10.32.0.2',4,'glosatest',2,'00000E68','10.38.0.1',1,19,0)
Sending Accounting Ack of id 35 to a200002 (Ciscob)
Resp Time: 80 Auth: 0/0 -> 0 Acct: 2/0/0 -> 2
> -----Original Message-----
> From: Dale E. Reed Jr. [SMTP:daler@iea-software.com]
> Sent: 23 July 1999 18:16
> To: radiusnt@iea-software.com
> Subject: Re: [RadiusNT] Case Sensitive Password flag Broken ?
>
> David Chapman wrote:
> >
> > Here is the result of the x15, any clues ?
>
> I need the actual REQUEST, not the startup.
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart