Re: [RadiusNT] OID and NasPort numbers on Cisco as5300
Dale E. Reed Jr. ( (no email) )
Fri, 14 May 1999 15:31:34 -0700
Nicolaj Ottsen wrote:
> I can't find out what to put in the serverport table about NAS-Port numbers
> for ISDN ports.
> Modem ports are 1-60 and the OID is 126.96.36.199.188.8.131.52.184.108.40.206.x, but i can.t
> retrive the username from ISDN ports using the same OID.
> The Nas-Port number for ISDN ports is reported as 20000-20090 but
> 220.127.116.11.18.104.22.168.22.214.171.124.20014 does not retrive the username for the user on
> that port.
> What is wrong the ISDN Port number or the OID ?
What kind of terminal server are you using? I'm guessing that the
POrt number might be the 2xxxx format, but the SNMP is still going
to be the 0-90 number. What I do is login as an ISDN user and
then do an SNMP walk of the 126.96.36.199.188.8.131.52.184.108.40.206 tree and
see where it lists me.
Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com