##Start Capture
Resp Time: 310 Auth: 35580/3870 -> 40178 Acct: 65336/0/8495 -> 73831
radrecv: Request from host d09d2e02 code=1, id=178, length=171
User-Name = "jordyco"
Password = "\225*\025\030$\256=\005W\317\342K\226\321\264\206"
NAS-Identifier = 208.157.46.2
NAS-Port = 6
Acct-Session-Id = "328524"
Vendor-Specific = ""
User-Service-Type = Framed-User
Framed-Protocol = PPP
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Caller-Id = #removed
NAS-Port-DNIS = ""
NAS-Port-Type = ISDN
rad_authenticate_ODBC()
Password = "\225*\025\030$\256=\005W\317\342K\226\321\264\206"
SQL Statement: Select DateDiff(Minute, GetDate(), DateAdd(Day,
(ma.Extension+ma
..OverDue+1), maExpireDate)), DateDiff(Minute, GetDate(), DateAdd(Day,
sa.Extensi
on+1, saExpireDate)), sa.AccountID, sa.AccountType, sa.Password, sa.Login,
sa.Sh
ell, sa.TimeLeft, sa.LoginLimit From MasterAccounts ma, SubAccounts sa
Where (s
a.Login='jordyco' or sa.Shell='jordyco') AND ma.CustomerID=sa.CustomerID and
sa.
Active<>0 and ma.Active<>0
Decrypted Password: #removed
Database Password: #removed
Checking for duplicate logins.
SQL Statement: RadCheckOnline 'jordyco'
jordyco found on-line 0 time(s).
Checking for port access.
SQL Statement: RadCheckPort '208.157.46.2', 6, 'PPP'
SQL Statement: RadGetConfigs 20423
Framed-Address = 208.157.46.242 (8456180)
Framed-Netmask = 255.255.255.255 (8456180)
Framed-Route = 206.156.110.192/27 208.157.46.242 1 (8456180)
Sending Ack of id 178 to d09d2e02 (208.157.46.2)
Framed-Address = 208.157.46.242
Framed-Netmask = 255.255.255.255
Framed-Route = "206.156.110.192/27 208.157.46.242 1"
Resp Time: 441 Auth: 35581/3870 -> 40179 Acct: 65336/0/8495 -> 73831
radrecv: Request from host d09d2e02 code=4, id=177, length=259
User-Name = "unauthenticated"
NAS-Identifier = 208.157.46.2
Acct-Status-Type = Stop
Acct-Session-Id = "328524"
Acct-Delay-Time = 0
User-Service-Type = 0
NAS-Port-Type = ISDN
NAS-Port = 6
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Caller-Id = #removed
NAS-Port-DNIS = ""
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Vendor-Specific = ""
Acct-Session-Time = 6
Acct-Terminate-Cause = User-Request
Acct-Input-Octets = 436
Acct-Output-Octets = 347
SQL Statement: INSERT INTO Calls
(CallDate,UserName,NASIdentifier,AcctStatusTyp
e,AcctSessionId,AcctDelayTime,NASPortType,NASPort,AcctSessionTime,AcctInputO
ctet
s,AcctOutputOctets) VALUES
(GetDate(),'unauthenticated','208.157.46.2',2,'328524
',0,2,6,6,436,347)
Sending Accounting Ack of id 177 to d09d2e02 (208.157.46.2)
##End Capture
-----Original Message-----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Monday, December 14, 1998 9:22 PM
Subject: Re: [RadiusNT] Ascend Pipeline
>Theodore Cekan wrote:
>>
>> I have a user using an Ascend Pipeline ISDN router to dial in. In radius
I
>> see him connect and authenticate, then a request to disconnect comes in
>> immediately. Username is "unauthenticated". Why would this be?
>
>What does RadiusNT show in -x15 debug mode when the ISDN user
>dials in? What mode are you running RadiusNT in?
>
>--
>Dale E. Reed Jr. (daler@iea-software.com)
>_________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com
>
>For more information about this list, including removal, please
>see this URL: http://www.iea-software.com/maillist.html
>
For more information about this list, including removal, please
see this URL: http://www.iea-software.com/maillist.html