Re: [Emerald] Emerald and MegaPop

James Martin ( james@ficom.net )
Tue, 11 May 1999 14:20:38 -0500

Hello,

Is the ip address for the RadRoamServer a ip address that I pick? Does this
one ip address cover all four MegaPop Servers?

At 11:47 PM 5/10/99 -0700, you wrote:
>James Martin wrote:
>>
>> >You have to do both.
>> >
>> >1) You MUST add the Megpop server to your Servers list. Otherwise,
>> >RadiusNT
>> >will reject the request w/out processing it.
>>
>> Should "Auto Proxy" under the "Servers" tab point to "none" or to the
>> corresponding entry under "Roam Servers"? Does the "Port Type", "Starts at
>> 0" etc... make any difference or the number of "Ports" and "Modems" or can
>> they be left alone?
>
>Set autoproxy to none. The other information about the NAS doesn't
>really matter. I usually just set them to 0.
>
>> >2) You need to create a RadRoamServer entry with a valid IP address, and
>> >the
>> > strip domain/treat as local flags set (note, the IP is irrelevant,
>> >and it
>> > doesn't have anything to do with megapop). Then create a
>> >RadRoamDomains
>> > entry with ficom.net as the domain, pointing to the RadRoamServer you
>> > created.
>>
>> MegaPop gave me four Access Servers. This means I will have four @ficom.net
>> entries under "Roam Domains". Will this cause a problem?
>
>You have it backwards. You need to create four SEVERS entries, once
>for each IP they gave you. You will only have one RadRoamserver
>and RadRoamDomain entry, as noted above.
>
>> >You also need to enable user proxy in the RadiusNT admin and restart
>> >RadiusNT.
>>
>> Previously when I checked "User Proxy" and restarted the Radius Server it
>> refused to authenticate even my local users. When I ran in debug mode it
>> would load the defaults and after sometime would load the clients and then
>> it would go no further. I had to uncheck "User Proxy" and restart Radius to
>> allow anyone to log on. The Radius version is 2.5.124 with a file size of
>> 331kb and a date of 06/08/1998.
>
>There are some known issues with Proxy and 124. You should upgrade a
>machine to 162 and test it. 162 should work find for you.
>
>
>--
>
>Dale E. Reed Jr. Emerald and RadiusNT
>__________________________________________
>IEA Software, Inc. www.iea-software.com
>

Thank You,
=+=+=+=+=+=+=+=+=+
James Martin, MCP
System Administrator
First Internet Communications, LLC
(931) 455-8611
www.ficom.net