I run the service from the control panel and run radlogin from the
dos prompt and it authenticates the user but sometimes the result shows
like this:
0:Good:0
Good: 0 Bad: 0 T/O: 1 Avg: 0
And whenever i run the radius -x15 it shows me the error
>>> here is the result of my radius -x15:
>>>
>>>
>>> radrecv: Request from host 7f000001 code=3D1, id=3D132, length=3D54
>>> NAS-IP-Address =3D 127.0.0.1
>>> NAS-Port =3D 0
>>> User-Name =3D "ma"
>>> Password =3D "\36159\204\022\274\315\373OMwW\332n\215\362"
>>> Checking user record PW_PASSWORD type
>>> authPapPwd
>>> chkPwd->strvalue is WINNT\xfiamail
>>> decrypted pwd is wads
>>> (WINNT) User:ma Domain:xfiamail Password:wads
>>>
>>> RadiusNT does not have sufficient rights to authenticate against the=
NT
>>> SAM (Pr
>>> ivilege Not Held)
>>> Sending Reject of id 132 to 7f000001 (127.0.0.1)
>>>
>>> Resp Time: 40 Auth: 0/1 -> 1 Acct: 1/0/0 -> 1
>>>
I don't know why.. ANd i tried dialing from a win95 machines it=
authenticates
it sometimes, sometimes it wont.
I'm CONFUSED.
Allen
*********** REPLY SEPARATOR ***********
On 8/12/98, at 3:19 PM, Allen Mallari wrote:
>a while ago actually it works, for some other user but sometimes
>don't, and i shows the output BAD:1 all the time.
>
>
>
>*********** REPLY SEPARATOR ***********
>
>On 8/12/98, at 2:03 PM, James B. Hrdy wrote:
>
>>>From a quick look, it appears that you are not logged in as=
administrator ?
>>
>>As a service you can set this in the services control panel, but I think=
you
>>will need to log in as the administrator and try it.
>>
>>
>>
>>> here is the result of my radius -x15:
>>>
>>>
>>> radrecv: Request from host 7f000001 code=3D1, id=3D132, length=3D54
>>> NAS-IP-Address =3D 127.0.0.1
>>> NAS-Port =3D 0
>>> User-Name =3D "ma"
>>> Password =3D "\36159\204\022\274\315\373OMwW\332n\215\362"
>>> Checking user record PW_PASSWORD type
>>> authPapPwd
>>> chkPwd->strvalue is WINNT\xfiamail
>>> decrypted pwd is wads
>>> (WINNT) User:ma Domain:xfiamail Password:wads
>>>
>>> RadiusNT does not have sufficient rights to authenticate against the=
NT
>>> SAM (Pr
>>> ivilege Not Held)
>>> Sending Reject of id 132 to 7f000001 (127.0.0.1)
>>>
>>> Resp Time: 40 Auth: 0/1 -> 1 Acct: 1/0/0 -> 1
>>>
>>>
>>> hope this helps now.
>>>
>>> Allen
>>>
>>>
>>> *********** REPLY SEPARATOR ***********
>>>
>>> On 8/11/98, at 8:03 PM, Dale E. Reed Jr. wrote:
>>>
>>> >Allen Mallari wrote:
>>> >>
>>> >> this is what i did:
>>> >>
>>> >> 1) I open up one command window for radius -x15.
>>> >>
>>> >> MSDOS: radius -x15
>>> >
>>> >I need the lines in THIS window, that start with radrecv and end
>>> >with the stats line for each request. Your still just giving the
>>> >radlogin results, which isn't that useful to resolving your problem.
>>> >
>>> >
>>> >--
>>> >Dale E. Reed Jr. (daler@iea-software.com)
>>> >_________________________________________________________________
>>> > IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
>>> > Internet Solutions for Today | http://www.iea-software.com
>>>
>>>
>>
>>
>>
>>James B. Hrdy
>>email: jhrdy@greensoft.com
>>web: http://www.greensoft.com/billing
>>GreenSoft Solutions, Inc.
>>Voice: 785.843.8683 ext 203
>>2317 Ponderosa Drive
>>Fax: 785.840.0055
>>Lawrence, Ks.
>>United States of America