As a service you can set this in the services control panel, but I think you
will need to log in as the administrator and try it.
> here is the result of my radius -x15:
> radrecv: Request from host 7f000001 code=1, id=132, length=54
> NAS-IP-Address = 127.0.0.1
> NAS-Port = 0
> User-Name = "ma"
> Password = "\36159\204\022\274\315\373OMwW\332n\215\362"
> Checking user record PW_PASSWORD type
> chkPwd->strvalue is WINNT\xfiamail
> decrypted pwd is wads
> (WINNT) User:ma Domain:xfiamail Password:wads
> RadiusNT does not have sufficient rights to authenticate against the NT
> SAM (Pr
> ivilege Not Held)
> Sending Reject of id 132 to 7f000001 (127.0.0.1)
> Resp Time: 40 Auth: 0/1 -> 1 Acct: 1/0/0 -> 1
> hope this helps now.
> *********** REPLY SEPARATOR ***********
> On 8/11/98, at 8:03 PM, Dale E. Reed Jr. wrote:
> >Allen Mallari wrote:
> >> this is what i did:
> >> 1) I open up one command window for radius -x15.
> >> MSDOS: radius -x15
> >I need the lines in THIS window, that start with radrecv and end
> >with the stats line for each request. Your still just giving the
> >radlogin results, which isn't that useful to resolving your problem.
> >Dale E. Reed Jr. (email@example.com)
> > IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> > Internet Solutions for Today | http://www.iea-software.com
James B. Hrdy
GreenSoft Solutions, Inc.
Voice: 785.843.8683 ext 203
2317 Ponderosa Drive
United States of America