Message 2: Re: Email only using Radius
from "Zak Wolfinger" <zak@cyberlink.com>
Message 3: RE: Email only using Radius
from "Mike Gibson" <mikeyg@valleynetworking.com>
Message 4: vendor specific attributes ?
from "Glenn, Bill" <Bill.Glenn@COMPAQ.com>
Message 5: Re: Doc File
from Edsonet <administrator@yellowhead.com>
Message 6: NTMail and RadiusNT
from "Viktors Judins" <storms@parks.lv>
Message 7: Re: NTMail and RadiusNT
from "Rudy Komsic" <rudyk@cyberglobe.net>
Message 8: Re: NTMail and RadiusNT
from "Viktors Judins" <storms@parks.lv>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Email only using Radius
From: "Mike Gibson" <mikeyg@valleynetworking.com>
Date: Fri, 7 Aug 1998 10:03:47 -0700
Is there a way, using radius 2.5, to restrict a login to email only? It was
mentioned to me that it was possible. Thanks for the help.
Mike Gibson
System Engineer
Valley Networking, Inc.
mikeyg@valleynetworking.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Email only using Radius
From: "Zak Wolfinger" <zak@cyberlink.com>
Date: Fri, 7 Aug 1998 12:17:30 -0500
You can use Radius to assign a filter and then setup the filter(s) in
your NAS. What type of terminal server are you using?
-----Original Message-----
From: Mike Gibson <mikeyg@valleynetworking.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Friday, August 07, 1998 12:05 PM
Subject: Email only using Radius
>Is there a way, using radius 2.5, to restrict a login to email only?
It was
>mentioned to me that it was possible. Thanks for the help.
>
>Mike Gibson
>System Engineer
>Valley Networking, Inc.
>mikeyg@valleynetworking.net
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: RE: Email only using Radius
From: "Mike Gibson" <mikeyg@valleynetworking.com>
Date: Fri, 7 Aug 1998 10:39:26 -0700
I am using a Livingston PM3.
Thanks
Mike Gibson
System Engineer
Valley Networking, Inc.
mikeyg@valleynetworking.net
-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of Zak Wolfinger
Sent: Friday, August 07, 1998 10:18 AM
To: radiusnt@iea-software.com
Subject: Re: Email only using Radius
You can use Radius to assign a filter and then setup the filter(s) in
your NAS. What type of terminal server are you using?
-----Original Message-----
From: Mike Gibson <mikeyg@valleynetworking.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Friday, August 07, 1998 12:05 PM
Subject: Email only using Radius
>Is there a way, using radius 2.5, to restrict a login to email only?
It was
>mentioned to me that it was possible. Thanks for the help.
>
>Mike Gibson
>System Engineer
>Valley Networking, Inc.
>mikeyg@valleynetworking.net
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 4 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: vendor specific attributes ?
From: "Glenn, Bill" <Bill.Glenn@COMPAQ.com>
Date: Fri, 7 Aug 1998 14:06:41 -0500
We have a Cisco 2511 doing Radius accounting. The problem is that NAS-Port
(attribute 5) is limited to 2 bytes (0-65535) by the RFC. For Cisco
extended virtual port name format this limits the ports to 55 before the
value wraps around. (6XX00 with XX ranging from 0-55). Cisco can send
virtual port info without this limitation as a vendor specific attribute
string. I verified with a LAN monitor that it is sent, but the RadiusNT
account record reports a null string. Is there a way to configure RadiusNT
to handle this? Cisco says that it will work with their CiscoSecure server
but are not familiar with RadiusNT. Thanks for any help.
Bill Glenn
Quality Assurance
Compaq Computers
Access Solutions Division
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 5 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Doc File
From: Edsonet <administrator@yellowhead.com>
Date: Fri, 07 Aug 1998 13:44:33 -0600
What Version of MS Word is required to read the RadiusNT25.doc file. We are
using MS Word Version 7.0, and none of the formatting comes through when we
attempt to view it. The HTML files on the Web site are only for RadiusNT
V2.2, which explains some of the difficulty we had setting 2.5 up.
J.A. Coutts
Systems Engineer
Edsonet/TravPro
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 6 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: NTMail and RadiusNT
From: "Viktors Judins" <storms@parks.lv>
Date: Fri, 7 Aug 1998 23:19:06 +0300
Hello!
I have a problem with NTMail users autorization. I install RadiusNT 2.5,
NTMail 3.02m and DewauthNTMail.
--------------------------------------
e-mail: Storms@parks.lv
http:\\www.parks.lv
phone: +371-9282340
--------------------------------------
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 7 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: NTMail and RadiusNT
From: "Rudy Komsic" <rudyk@cyberglobe.net>
Date: Fri, 7 Aug 1998 16:21:32 -0400
hmmm.... well That will not help fix it.... be more elaborate in what the
problem is.
-----Original Message-----
From: Viktors Judins <storms@parks.lv>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: August 7, 1998 4:22 PM
Subject: NTMail and RadiusNT
>Hello!
>I have a problem with NTMail users autorization. I install RadiusNT 2.5,
>NTMail 3.02m and DewauthNTMail.
>
>--------------------------------------
>e-mail: Storms@parks.lv
>http:\\www.parks.lv
>phone: +371-9282340
>--------------------------------------
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 8 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: NTMail and RadiusNT
From: "Viktors Judins" <storms@parks.lv>
Date: Fri, 7 Aug 1998 23:47:34 +0300
>hmmm.... well That will not help fix it.... be more elaborate in what the
>problem is.
NTMail 3.02 works Ok if user is in NTMail users database.
When I try to send message to user than not in NTMail database, but is in
SQL Server (connect via ODBC), we have no response. Do You have any idea
where I can monitor, what happens?
I have no 100% sure that Radius 2.5 work properly but it is loaded two users
from Radius database (table SubAccount) on startup time.
--------------------------------------
e-mail: Storms@parks.lv
http:\\www.parks.lv
phone: +371-9282340
--------------------------------------