Message 2: Real-Time SNMP concurrency ver.
from Luca Brizzi <lbrizzi@pronet.it>
Message 3: upgrade to 2.5
from <ronen@israsrv.net.il>
Message 4: RE: using the unix passwd file
from "Frank Nowling" <frankn@netropolis.net>
Message 5: Unsubscribe
from stoy@lifegate.net
Message 6: Login Strangeness
from "Gregory White" <whiteg@dnc.net>
Message 7: Re: upgrade to 2.5
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 8: Re: Real-Time SNMP concurrency ver.
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 9: Proxy and DNIS
from "Mark Lang" <mark@eclipse.net.uk>
Message 10: Re: Server port access restrictions with RadNT2.5/Emerald
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 11: Error Messages
from "Alan D. Criado" <ACriado@elink.net>
Message 12: Access 97 db gone wild - help!
from "Michael G. Minnich" <mminnich@logan.net>
Message 13: Radius Proxy
from "Greg White" <whiteg@dnc.net>
Message 14: Re: Radius Proxy
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 15: Configuring Defaults for service types
from Glen Harvy <root@aquarius.com.au>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: using the unix passwd file
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Tue, 14 Jul 1998 00:31:41 -0700
Frank Nowling wrote:
>
> I've been trying to get 2.5.124 to validate against a passwd file in the
> c:\radius directory.
> I'm running in ODBC mode only and have a test account with a password of
> UNIX. radius reports a bad password when using radlogin. Page 14 of the
> v2.5 manual seems straight forward enough, is there a step missing or is
> this functionallity broken? My only thought was that the process that got
> the passwd file to me may have DOSified passwd by putting a cr/lf
> combination at the end of each line. could this cause a problem?
Make sure the data directory in the RadiusNT admin is fully specified.
RadiusNT will look in that directory for the passwd file. You should
see a line with the password the user received, the encrypted password
in the passwd file, and the encrypted password (from the clear text one
the user entered). If you don't see that line, RadiusNT could find the
passwd file.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 2 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Real-Time SNMP concurrency ver.From: Luca Brizzi <lbrizzi@pronet.it>Date: Tue, 14 Jul 1998 12:18:30 +0200
Where I can found the docs about the real-time SNMP concurrency verificationand the other features of the RNT Enterprise Edition?
T.I.A.
Luca BrizziLBrizzi@PNGroup.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: upgrade to 2.5From: <ronen@israsrv.net.il>Date: Tue, 14 Jul 1998 13:08:30 +0200
Hello,
I am trying re upgrade to version 2.5, and decided to do it from scratch,so I installed 2.5.124 and run the radiusnt.sql.When running radadmn and doing ODBC check i get an error from the sql serversaying "invalid object name masterAccounts", and the table exists with acapital M, I know that sql server is case sensitive?So masterAccounts should be with a capital M? or m?and How do I make the radadmn to work?
Best regards,
Ronen
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: using the unix passwd fileFrom: "Frank Nowling" <frankn@netropolis.net>Date: Tue, 14 Jul 1998 08:44:55 -0500
Dale,Still no go. I didn't have the data directory specified, and now I do. Triedit two different ways: c:\radius and c:\radius\. Here's the start up ofradius, and my attempted login (with passwords edited to protect theinnocent, except for the database password: UNIX). Any further thoughts?
ThanksFrank
============================================C:\radius>radius -x15
RadiusNT 2.5.124 Copyright (c) 1995-1997 IEA Software, Inc. All Rights Reserved, Worldwide
Some portions Copyright (c) 1992 Livingston Enterprises, Inc. and Copyright (c) 1995 Ascend Communications, Inc.
0) IgnoreCase: 01) TrimName: 02) ReqAcctAuth: 03) AllowMalformed: 14) Mode: 15) Proxy: 06) Options: 1957) Debug: 08) LogFile:9) AcctLogFile:10) ODBCDatasource: Radius11) Username: radservice12) Password: letmein13) AcctODBCDatasource:14) AcctUsername:15) AcctPassword:16) DataDirectory: c:\radius\17) AcctDirectory:18) UsersFile: Users19) CompanyName: Netropolis Communications20) License: yadda yadda yadda21) IPAddress: All
Param: Debug Level: 15Initializing Winsock...ODBC Datasource: 'Radius'...Making ODBC Connection...MS SQL Server Mode EnabledODBC Datasource: 'Radius'...Making ODBC Connection...MS SQL Server Mode EnabledAllocating Statement...
SQL Statement: Select Name, RadAttributeID, Type From RadAttributes
SQL Statement: Select ra.Name, rv.Name, rv.Value From RadValues rv,RadAttributes ra Where rv.RadAttributeID = ra.RadAttributeID
122 Dictionary Attributes Loaded...
SQL Statement: Select Server, IPAddress, Secret From Servers
12 Clients LoadedAccounting Column 0 (16): 'NASIdentifier'Accounting Column 1 (4): 'NASPort'Accounting Column 2 (8): 'AcctSessionId'Accounting Column 3 (2): 'AcctStatusType'Accounting Column 4 (16): 'CallDate'Accounting Column 5 (12): 'UserName'Accounting Column 6 (2): 'AcctAuthentic'Accounting Column 7 (2): 'UserService'Accounting Column 8 (2): 'LoginService'Accounting Column 9 (16): 'LoginHost'Accounting Column 10 (4): 'AcctDelayTime'Accounting Column 11 (4): 'AcctSessionTime'Accounting Column 12 (4): 'FramedProtocol'Accounting Column 13 (16): 'FramedAddress'Accounting Column 14 (4): 'AcctInputOctets'Accounting Column 15 (4): 'AcctOutputOctets'Accounting Column 16 (4): 'AcctInputPackets'Accounting Column 17 (4): 'AcctOutputPackets'Accounting Column 18 (2): 'NASPortType'Accounting Column 19 (10): 'ClientPortDNIS' 20 Accounting Columns Loaded
RadiusNT Standard Initialized...
radrecv: Request from host ccb02f51 code=1, id=187, length=58 NAS-IP-Address = 127.0.0.1 NAS-Port = 0 User-Name = "frankn" Password = "\043!\375Q\224v\259\365/0\336c\337Z'y"rad_authenticate_ODBC() Password = "\043!\375Q\224v\259\365/0\336c\337Z'y"
SQL Statement: Select DateDiff(Minute, GetDate(), DateAdd(Day,(ma.Extension+ma.OverDue+1), maExpireDate)), DateDiff(Minute, GetDate(), DateAdd(Day, sa.Extension+1, saExpireDate)), sa.AccountID,sa.AccountType, sa.Password, sa.Login, sa.Shell, sa.LoginLimit FromMasterAccounts ma, SubAccounts sa Where (sa.Login='frankn' orsa.Shell='frankn') AND ma.CustomerID=sa.CustomerID and sa.Active<>0 and ma.Active<>0
Decrypted Password: letmein Database Password: UNIXSending Reject of id 187 to ccb02f51 (dhcp10)
SQL Statement: INSERT INTO RadLogs(RadLogMsgID, LogDate, Username, Data)VALUES (11, GetDate(), 'frankn', 'letmein')
User: frankn Bad Password
User: frankn Bad Password
Resp Time: 201 Auth: 0/1 -> 1 Acct: 0/0/0 -> 0
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: UnsubscribeFrom: stoy@lifegate.netDate: Tue, 14 Jul 1998 12:00:26 -0500
Unsubscribe
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Login StrangenessFrom: "Gregory White" <whiteg@dnc.net>Date: Tue, 14 Jul 1998 10:33:46 -0700
We just ran the rad25_up2.sql script in preparation for upgrading to Radius2.5. Everything went smoothly except for one problem. Consider thefollowing scenario:
Under one master billing record there are two subaccounts:
Account 1:
Services: Dialup AccountLogin: johndoePassword: password1Email: (blank)
Account 2:
Services: Email OnlyLogin: (blank)Password: differentpasswordEmail: johndoe
This doesn't happen too frequently, but there are several customers whowant the same username, but a different password for login and email. Theproblem is that now, radius only looks at Account 2, and returns an errorabout the Email Only account not having any default radius attributes. This is expected since the Email Only account does not have dialupcapability. However, the fact that it is looking at Account 2, regardlessof the Login field being blank is strange.
Is there some option or setting that I have missed, or have inappropriatelyselected?
Thank you,
Greg WhiteNetwork Operations ManagerDirect NET Communications
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: upgrade to 2.5From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Tue, 14 Jul 1998 11:19:44 -0700
ronen@israsrv.net.il wrote:> > I am trying re upgrade to version 2.5, and decided to do it from scratch,> so I installed 2.5.124 and run the radiusnt.sql.> When running radadmn and doing ODBC check i get an error from the sql server> saying "invalid object name masterAccounts", and the table exists with a> capital M, I know that sql server is case sensitive?> So masterAccounts should be with a capital M? or m?> and How do I make the radadmn to work?
If you know the setup is working, just ignore the check. Itsnot required, just a little tool to help find problems. I'll checkthe SQL and correct the cap problem.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Real-Time SNMP concurrency ver.From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Tue, 14 Jul 1998 11:23:07 -0700
The latest version of the docs on the FTP section includes a Chapter on the Enterprise features.
Luca Brizzi wrote:> > Where I can found the docs about the real-time SNMP concurrency verification> and the other features of the RNT Enterprise Edition?
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Proxy and DNISFrom: "Mark Lang" <mark@eclipse.net.uk>Date: Tue, 14 Jul 1998 19:27:57 +0100
This is a multi-part message in MIME format.
------=_NextPart_000_004D_01BDAF5D.7FE008D0Content-Type: multipart/alternative; boundary="----=_NextPart_000_0046_01BDAF5D.7FD55A70"
------=_NextPart_000_0046_01BDAF5D.7FD55A70Content-Type: text/plain; charset="iso-8859-1"Content-Transfer-Encoding: 7bit
Hi,
We have used RadiusNT together with the Merit Radius server to form a proxy radius solution. It works very wellindeed.
I have browsed the list archive but wouldlike to confirm if RadiusNT can supportproxying with the REALM/username as well as username@domainname format. Both formatsare supported by the Merit server.
We are running our POPs and leasing them outto other ISP's and corporate clients. When we grant them access to our service we allocatethen their own DNIS number. Can/Could RadiusNTimplement proxying according to DNIS and eliminate the requirement for a username to include the realm or domainname.
Is this even a good idea ?
Cheers
Mark.
------=_NextPart_000_0046_01BDAF5D.7FD55A70Content-Type: text/html; charset="iso-8859-1"Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
Hi,
We have used RadiusNT together with
the Merit Radius server to form a
proxy radius solution. It works very =well
indeed.I have browsed the list archive but would
like to confirm if RadiusNT can support
proxying with the REALM/username as well as
username@domainname format. Both formats
are supported by the Merit server.We are running our POPs and leasing them out
to other ISP's and corporate clients. When =
we grant them access to our service we =allocate
then their own DNIS number. Can/Could =RadiusNT
implement proxying according to DNIS and
eliminate the requirement for a username to
include the realm or domainname.Is this even a good idea ?
Cheers
Mark.
------=_NextPart_000_0046_01BDAF5D.7FD55A70--
------=_NextPart_000_004D_01BDAF5D.7FE008D0Content-Type: application/x-pkcs7-signature; name="smime.p7s"Content-Transfer-Encoding: base64Content-Disposition: attachment; filename="smime.p7s"
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
------=_NextPart_000_004D_01BDAF5D.7FE008D0--
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Server port access restrictions with RadNT2.5/EmeraldFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Tue, 14 Jul 1998 11:31:34 -0700
Glen Harvy wrote:> > Can we allocate server ports to a service using Emerald yet?
The configuration for this is in the Emerald 2.5 admin. :(
Since it didn't exist when 2.2 was created, there is notsupport for it in the 2.2 admin.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Error MessagesFrom: "Alan D. Criado" <ACriado@elink.net>Date: Tue, 14 Jul 1998 15:19:02 -0400
Hello Dale.
I'm using RadiusNT 2.5
We've been running radius in -X15 mode.
About a week ago, we tried to run it as a service and it was a no go. Sowhen we went back to running it in -X15 mode all the configurations withinradius was gone and we had to put them all back in. Since then we've beenseeing the messages below in our log files. The only thing I can could becausing this is some configuration that we missed when reconfiguring radius.
1. Do you know what could be causing these messages below?2. How do I change over to running it as a service? I thought it was assimple as install as a service and start the service.
Thanks.
Alan
RadiusNT (Emerald Standard) Initialized...
Bad authenticator: from USR1 - ID: 219
Bad authenticator: from USR1 - ID: 100
Bad authenticator: from USR1 - ID: 85
Bad authenticator: from USR1 - ID: 93
Bad authenticator: from USR1 - ID: 127
Bad authenticator: from USR1 - ID: 101
Bad authenticator: from USR1 - ID: 94
Bad authenticator: from USR1 - ID: 179
Bad authenticator: from USR1 - ID: 135
Bad authenticator: from USR1 - ID: 250
Bad authenticator: from USR1 - ID: 185
Bad authenticator: from USR1 - ID: 174
Bad authenticator: from USR1 - ID: 222
Bad authenticator: from USR1 - ID: 102
Bad authenticator: from USR1 - ID: 53
Bad authenticator: from USR1 - ID: 103
Bad authenticator: from USR1 - ID: 234
Bad authenticator: from USR1 - ID: 150
Bad authenticator: from USR1 - ID: 8
Bad authenticator: from USR1 - ID: 223
Bad authenticator: from USR1 - ID: 104
Bad authenticator: from USR1 - ID: 106
Bad authenticator: from USR1 - ID: 72
Bad authenticator: from USR1 - ID: 182
Bad authenticator: from USR1 - ID: 2
Bad authenticator: from USR1 - ID: 61
Bad authenticator: from USR1 - ID: 113
Bad authenticator: from USR1 - ID: 7
Bad authenticator: from USR1 - ID: 235
Bad authenticator: from USR1 - ID: 54
Bad authenticator: from USR1 - ID: 224
Bad authenticator: from USR1 - ID: 151
Bad authenticator: from USR1 - ID: 175
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Access 97 db gone wild - help!From: "Michael G. Minnich" <mminnich@logan.net>Date: Tue, 14 Jul 1998 16:25:13 -0400
We upgraded 7 days ago to RadiusNT 2.5.124. Access DB size was 12 MB +/- aswe cleaned out most prior call records. All was going well until today.When unable to enter clients, the techs checked the db and it was over 1 GBin size. (It didn't grow much over the first few days we watched it) Wentto repair and compact the db, repair failed saying the db had reached amaximum size. Compact failed returning an error, "Radius97 isn't an indexin this table. Look at the indexes collection of the TableDef object todetermine the valied index names." We can no longer open this Radius db.
Just switched to a back-up copy and all is running fine again. Would liketo know why this happened and how, if possible, we could open the db toretrieve calls info.
Please don't say switch to MSQL, my answer is we will, but one thing at atime. ;->
TIA,
*********Michael G. Minnich, President Access Visions CorporationVoice: 937.593.7177 x.126 Fax: 937.592.4165
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Radius ProxyFrom: "Greg White" <whiteg@dnc.net>Date: Tue, 14 Jul 1998 18:32:12 -0700
Greetings,
We are attempting to use user-based proxy to forward authenticationrequests to another proxy server. We have set them up in RadRoamDomainsand RadRoamServers, with the correct address and secret (I have includedour exact config below). The server we are trying to proxy for has addedour radius server to his clients file. Tests have been unsuccessful. Ihave included the packet level debug below. I didn't see much in the listarchives, so I apologize if this has been hashed over before.
On another possibly related note, when we first tried 2.5, several tabsappeared in the RadAdmin that allowed entry of records through the GUI. Now that I have installed the newest version, they don't show up, so I haveto make entries manually.
RadRoamServers -
RadRoamServerID: 1IPAddress: 204.202.84.10Server: testdomainSecret: hoohooTimeout: 15Retries: 3TreatAsLocal: 0StripDomain: 1AuthPort: 1645AcctPort: 1646AllowRLogin: 0
RadRoamDomains -
RadRoamDomainID: 1RadRoamServerID: 1Domain: testdomain.comPriority: 2CostPerMinute: 0AccountType: null
* I have also tried it with an accounttype specified with the same results.
radrecv: Request from host ce3a7f2a code=1, id=103, length=8601 67 00 56 6b 8a 1b 08 7e 80 86 b2 b7 6d 63 e5 cb 30 14 c1 Packet Information: 66 bytes:01 12 74 65 73 74 40 73 6b 69 70 6e 65 74 2e 63 6f 6d 02 12 29 ae 87 88 3b8b 42 01 b2 b8 19 44 9f e2 d5 3a 04 06 ce 3a 7f 2a 05 06 00 00 00 05 3d 06 00 0000 00 06 06 00 00 00 02 07 06 00 00 00 01
radrecv: Request from host ce3a7f2a code=1, id=103, length=86 User-Name = "test@skipnet.com" Password = ")\256\207\210;\213B\001\262\270\031D\237\342\325:" NAS-Identifier = 206.58.127.42 NAS-Port = 5 NAS-Port-Type = Async User-Service = Framed-User Framed-Protocol = PPPrad_authenticate_ODBC() Password = ")\256\207\210;\213B\001\262\270\031D\237\342\325:"Sending proxy request to: skipnet:204.202.84.10:hoohoo:85
Resp Time: 30 Auth: 11/0 -> 12 Acct: 19/0/0 -> 19radrecv: Request from host ccca540a code=3, id=103, length=2003 67 00 14 d1 b1 0a 34 d2 e9 fa 01 a0 e5 b3 3c 39 35 b0 ed Packet Information: 0 bytes:
radrecv: Request from host ccca540a code=3, id=103, length=20
Proxy: Found Matching Proxy request for response (w/o proxy state).Sending Reject of id 103 to ce3a7f2a (riker)
Resp Time: 10 Auth: 11/1 -> 12 Acct: 19/0/0 -> 19
Thank you,
Greg WhiteDirect NET Communications
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 14 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Radius ProxyFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Tue, 14 Jul 1998 21:35:56 -0700
Greg White wrote:> > On another possibly related note, when we first tried 2.5, several tabs> appeared in the RadAdmin that allowed entry of records through the GUI.> Now that I have installed the newest version, they don't show up, so I have> to make entries manually.
I'm not quite sure what you are referring to here? There is an issuewhereif you go from test to ODBC mode, sometimes you have to save the modeand re-run Radadmn before the ODBC tabs will be displayed. > * I have also tried it with an accounttype specified with the same results.
Thats only for overriding the attributes received from the remote RADIUS server with the set of default attributes associated with thedomain. > radrecv: Request from host ce3a7f2a code=1, id=103, length=86> User-Name = "test@skipnet.com"> Sending proxy request to: skipnet:204.202.84.10:hoohoo:85
We received the requiest and forwarded it to the remote server. > radrecv: Request from host ccca540a code=3, id=103, length=20> > Proxy: Found Matching Proxy request for response (w/o proxy state).> Sending Reject of id 103 to ce3a7f2a (riker)
Here we received a reject from the remote server (code=3) andforward the reject back to the client making the request.
You didn't include the RadRoamServer/RadRoamDomain config forskipnet.com. Is the remote expecting test@skipnet.com orjust test for the username? The stripdomain option wouldreflect this option. Have you had the admin on the other sidecheck to see whats going on?
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 15 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Configuring Defaults for service typesFrom: Glen Harvy <root@aquarius.com.au>Date: Wed, 15 Jul 1998 16:49:34 +1000
Hi Dale,
I set up Emerald and had it going well with Radius 2.5 however when I triedto add an Attribute to one of my Default Service Types, I got the followingerror:-
SQL Server Error: 213 Insert error; column name or number of suppliedvalues does not match table definition.State = 4, Severity = 16.
This obliterated the two attributes already in there and now I can't addthose that were already there?
What can I do?
Glen.--------------------------------------------------------------------AQUARIUS Communications for all your Internet<>Fidonet needs <>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailervoice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930http://www.aquarius.com.au <> mailto:sales@aquarius.com.au