[RadiusNT Digest]

radiusnt-digest-request@iea-software.com
Thu, 9 Jul 1998 00:00:25 -0700

Message 1: Can I ?
from "Syed Mohammad Talha" <smtalha@global.net.pk>

Message 2: Re: Can I ?
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 3: Re: Emerald Accounting
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 4: remote authentication, different service
from "Beverly Wise" <bev@hyper-drive.com>

Message 5:
from "Payne, Jon" <JonPay@netg.co.uk>

Message 6: Service not working properly? Or is it something else?
from "Marc Beaudoin" <rookie@cit.qc.ca>

Message 7: running radiusnt as a service
from William Siradas <bill@webt.com>

Message 8: Re: remote authentication, different service
from John Lange <radadmin@palacenet.net>

Message 9: Re: RadiusNT problem when testing
from "Allen Mallari" <allen@fiax.net>

Message 10: no server found problem
from "Allen Mallari" <allen@fiax.net>

Message 11: S0002
from Victor Alba <victor@webjogger.net>

Message 12: Discovering accounting attributes
from "2Day Internet" <peter@2day.net.nz>

Message 13: Basic Radius Setup
from rabaut <rabaut@hcc.cc.fl.us>

Message 14: Re: Emerald Accounting
from Glen Harvy <root@aquarius.com.au>

Message 15: Re: running radiusnt as a service
from "Michael G. Minnich" <mminnich@logan.net>

Message 16: Emerald Payment Types
from Glen Harvy <root@aquarius.com.au>

Message 17: RE: running radiusnt as a service
from ronnie@itexas.net (Ronnie D. Franklin)

Message 18: Migration Question Unix/Max4000 -> RadiusNT/Max4000
from Ray Brighenti <bargi@webfront.net.au>

Message 19: Emerald MBR/Company Employees
from Glen Harvy <root@aquarius.com.au>

Message 20: Re: Migration Question Unix/Max4000 -> RadiusNT/Max4000
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 21: Re: Emerald Payment Types
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 22: Re: Discovering accounting attributes
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 23: Re: S0002
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 24: Re: RadiusNT problem when testing
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 25: Re: running radiusnt as a service
from "Dale E. Reed Jr." <daler@iea-software.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Can I ?
From: "Syed Mohammad Talha" <smtalha@global.net.pk>
Date: Wed, 8 Jul 1998 12:16:02 -0000

I am using Radiusnt and the using the 3Com access servers. I want to know
that can I authenticate the remote users on the server and the users from
my data base at a time.
Or do I have to use the text mode for making the users whcih I dont want to
be authenticated from my other users database.
Please help me in sorting out this matter and tell me what to do and how to
configure.

Regards.
Talha

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Can I ?
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Wed, 08 Jul 1998 04:38:05 -0700

Syed Mohammad Talha wrote:
>
> I am using Radiusnt and the using the 3Com access servers. I want to know
> that can I authenticate the remote users on the server and the users from
> my data base at a time.

Most NASes can authentication from RADIUS and their local database (usually
their local user database it checked first and if the user is not found,
then RADIUS is used).

> Or do I have to use the text mode for making the users whcih I dont want to
> be authenticated from my other users database.

What "other users" database are you referring to here? You typically
only add the users you want to authenticate, not the ones you do not
want to authenticate.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Emerald AccountingFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 04:53:36 -0700

Glen Harvy wrote:> > OK. I did that and now the "Calls On-Line" works but that's all. Details of> the login are not showing in the users details section. Here's an excerpt> from the accounting log:-

Are you looking at the Timeon tab or the Call Summary tab? Most likelyonly the first will have anything on it.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: remote authentication, different serviceFrom: "Beverly Wise" <bev@hyper-drive.com>Date: Wed, 8 Jul 1998 09:15:03 -0400

What I am running into is not as complicated as the other people on thislist. We are wanting to handle radius authentication via the Internet at adifferent site. The only thing this site is going to have is modems and theNAS. Am I assuming correctly that this can work, as long as the secrets andaddresses are set up correctly? Or, should the remote site have their ownradius?

Beverly L. WiseSystems OperatorFalls City Net Serviceshttp://www.fallscity.net

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: From: "Payne, Jon" <JonPay@netg.co.uk>Date: Wed, 8 Jul 1998 16:21:49 +0100

unsubscribe

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Service not working properly? Or is it something else?From: "Marc Beaudoin" <rookie@cit.qc.ca>Date: Wed, 8 Jul 1998 14:23:31 -0400

I am unable to authenticate unless I start it manually using the -x15 mode.Looking at the services, it says RadiusNT is started and working normally.

ODBC mode. Access97.

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: running radiusnt as a serviceFrom: William Siradas <bill@webt.com>Date: Wed, 08 Jul 1998 15:03:20 -0400

I am trying to get radiusnt working. When running in -x15 mode it worksfine but after installing and running it as a service it will notauthenticate users. The debug mode shows no errors. I'm stumped. Anyhelp would be greatly appreciated.

..

--------------------------------------------------------

William Siradas (wsiradas@webt.com)Technical SupportWeb Technologies

http://www.webt.com(716)694-2700(716)694-2696 fax

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: remote authentication, different serviceFrom: John Lange <radadmin@palacenet.net>Date: Wed, 08 Jul 1998 14:12:32 -0500

HI

It's that simple.

Set up the NAS's in the Emerald Admin Client Config, and set the auth andacct server to be your normal Radius servers, set the secrets, and it works...

Just like that.

JOhn :}

At 09:15 AM 7/8/1998 -0400, you wrote:>What I am running into is not as complicated as the other people on this>list. We are wanting to handle radius authentication via the Internet at a>different site. The only thing this site is going to have is modems and the>NAS. Am I assuming correctly that this can work, as long as the secrets and>addresses are set up correctly? Or, should the remote site have their own>radius?>>Beverly L. Wise>Systems Operator>Falls City Net Services>http://www.fallscity.net>>>>

John C. Lange, Sr. PALACE dot NET, INC.microjl@palacenet.net MICRO-TECH Computers, Inc.608.742.1601 & 6980 2800 New Pinery Roadhttp://www.palacenet.net/ Portage, WI 53901Visit our online store @ http://www.microt.com/Authorized iPSwitch WebVar @ http://www.microt.com/iPSwitch/index.html

--- __o --- _-\<,_ Fastest Service in Town --- (_)/ (_)

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: RadiusNT problem when testingFrom: "Allen Mallari" <allen@fiax.net>Date: Wed, 08 Jul 1998 13:32:50 -0700

Actually, I have another radius ver 2 and it works fineso what I did is copied this files to my secondary radiusand followed the instruction and I got this error when iinstalled radius 2.5

>> "(null): couldn't open server to find servers"

Thanks,Allen

*********** REPLY SEPARATOR ***********

On 6/25/98, at 9:46 PM, Dale Reed wrote:

>Allen Mallari wrote:>> >> I am having problem using radlogin command.>> What I did is installed the RadiusNT Server with the>> New Secondary License Key.>> Whenever I tried running the RADIUS in -x15 debug>> mode and then tried login using radlogin <username> <passwrd>>> it tells me it has an error message.>> >> "(null): couldn't open server to find servers">> >> I have two license.>>Please see the RadiusNT 2.5 documentation, testing RadiusNT>section. It details how to use radlogin to test RadiusNT and>what files (like the above server file) you need to create >before you can test it.>>-- >Dale E. Reed Jr. (daler@iea-software.com)>_________________________________________________________________> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs> Internet Solutions for Today | http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: no server found problemFrom: "Allen Mallari" <allen@fiax.net>Date: Wed, 08 Jul 1998 13:29:38 -0700

Hi, I am having problem using radlogin command.What I did is installed the RadiusNT Server with theNew Secondary License Key. Whenever I tried running the RADIUS in -x15 debugmode and then tried login using radlogin <username> <passwrd>it tells me it has an error message.

"(null): couldn't open server to find servers"

I have two license.

Thanks,Allen MallariFIA-Las Vegas702-310-3600allen@fiax.net

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: S0002From: Victor Alba <victor@webjogger.net>Date: Wed, 08 Jul 1998 17:02:00 -0400

RadiusNT 2.5 seems to be running ok, I've tested it with Radlogin andauthenticates just fine but just a few minutes ago I saw the following onthe RadiusNT Admin screen:

If I go to the "ODBC DSN" Tab where I have:

For Authentication:-------------------

DSN - Radius

And for Accounting:-------------------

DSN - Emerald

In either of them if I click on the "Check" button. I get the followingmessage:

S0002:[Mircrosoft][ODBC SQL Server Driver][SQL Server] Invalid Object Name'masterAccounts'

I've no idea why I'm getting this message, both authentication andaccounting are using the "sa" account with the correct password.

I've checked both DSN's and run the test and the connection is alwayssuccesfull (in ODBC32 screen)

I can open Emerald and log on using "sa" account.... but that's as far as Ican go in it.

What's going on here !!

-Victor

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Discovering accounting attributesFrom: "2Day Internet" <peter@2day.net.nz>Date: Thu, 9 Jul 1998 09:42:50 +1200

I need to be sure RadiusNT is recording all of of the accounting attributessent by my NAS. Can I do this without understanding what my NAS may besending Radius?

Putting it another way, does the accounting record saved in logfile.txt (alldebug boxs checked) show all of the attributes the NAS is sending, or onlythose Radius is configured to receive?

regards

Peter MottChief Enthusiast2Day Internet Limited.

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Basic Radius SetupFrom: rabaut <rabaut@hcc.cc.fl.us>Date: Sat, 08 Aug 1998 18:30:11 -0400

Hello

I need some help with the RadiusNT table setup. First, I have it running fine using Access against a Bay Networks RAC.

To setup an account so a user can only login once, I need to set up theSubAccounts LoginLimit = 1 ... What else do I need to set?? and where??

Is the CallsOnline just info from the Servers and ServerPorts tables? Ifso, i don't seem to be collecting any info there...

To get the StartTime/StopTime working, do I need to manually populate theentire ServerAccess table? Do I copy the ServerID from the Servers table and the Port from theServerPorts table for the ServerAccess table?

Can I assume that the start and stop times are based on the account typesand not on the user??

Can I make up a special account type and then assign unique start and stoptimes??

Thanks for the help

Mike

rabaut@hcc.cc.fl.usHillsborough Community CollegeP.O. Box 5096Tampa, Florida 33675-5096

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 14 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Emerald AccountingFrom: Glen Harvy <root@aquarius.com.au>Date: Thu, 09 Jul 1998 09:24:03 +1000

At 04:53 8/07/98 -0700, you wrote:>Glen Harvy wrote:>> >> OK. I did that and now the "Calls On-Line" works but that's all. Details of>> the login are not showing in the users details section. Here's an excerpt>> from the accounting log:->>Are you looking at the Timeon tab or the Call Summary tab? Most likely>only the first will have anything on it.>

When I ran "Call consolidation" for the first time the information becameavailable.

>-- >Dale E. Reed Jr. (daler@iea-software.com)>_________________________________________________________________> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs> Internet Solutions for Today | http://www.iea-software.com>>Glen.--------------------------------------------------------------------AQUARIUS Communications for all your Internet<>Fidonet needs <>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailervoice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930http://www.aquarius.com.au <> mailto:sales@aquarius.com.au

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 15 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: running radiusnt as a serviceFrom: "Michael G. Minnich" <mminnich@logan.net>Date: Wed, 08 Jul 1998 21:25:48 -0400

At 03:03 PM 7/8/98 -0400, William Siradas wrote:>I am trying to get radiusnt working. When running in -x15 mode it works>fine but after installing and running it as a service it will not>authenticate users. The debug mode shows no errors. I'm stumped. Any>help would be greatly appreciated.

What version of RadiusNT and what network access server are you using? Whatdatabase - Access 95, Access 97 or MSSQL or ??? In text, odbc mode or both?

*********Michael G. Minnich, President Access Visions CorporationVoice: 937.593.7177 x.126 Fax: 937.592.4165

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 16 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Emerald Payment TypesFrom: Glen Harvy <root@aquarius.com.au>Date: Thu, 09 Jul 1998 11:28:06 +1000

Hi Dale,

The manual refers to a payment type tagged "Invoice" yet there is no suchselection in Emerald.

Can I assume "Renewal" is the choice if I wish an Invoice to be printed?

Glen.--------------------------------------------------------------------AQUARIUS Communications for all your Internet<>Fidonet needs <>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailervoice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930http://www.aquarius.com.au <> mailto:sales@aquarius.com.au

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 17 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: running radiusnt as a serviceFrom: ronnie@itexas.net (Ronnie D. Franklin)Date: Wed, 8 Jul 1998 22:07:46 -0500

Do you have the DSN installed as a System DSN or a User DSN... DOS prompt works fine with a User DSN.. however, when run as a service the DSN needs to be a System DSN.....

-----Original Message-----From: Michael G. Minnich [SMTP:mminnich@logan.net]Sent: Wednesday, July 08, 1998 8:26 PMTo: radiusnt@iea-software.com; radiusnt@iea-software.comSubject: Re: running radiusnt as a service

At 03:03 PM 7/8/98 -0400, William Siradas wrote:>I am trying to get radiusnt working. When running in -x15 mode it works>fine but after installing and running it as a service it will not>authenticate users. The debug mode shows no errors. I'm stumped. Any>help would be greatly appreciated.

What version of RadiusNT and what network access server are you using? Whatdatabase - Access 95, Access 97 or MSSQL or ??? In text, odbc mode or both?

*********Michael G. Minnich, President Access Visions CorporationVoice: 937.593.7177 x.126 Fax: 937.592.4165

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 18 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Migration Question Unix/Max4000 -> RadiusNT/Max4000From: Ray Brighenti <bargi@webfront.net.au>Date: Thu, 09 Jul 1998 13:17:07 +1000

Hi all,

We are currently running a free version Unix based implementation ofRADIUS, we have also just purchaced a MAX4000 and have almost completedit's configuring.

Now the boss loves Unix and is against NT, but I'm the one who has to dothe billing, etc and am sick of running around needed to do the billing.

Basically what I'm asking is;

Is it possible to get the MAX to authenticate from the UNIX box but sendthe accounting info the RadiusNT as well.

I would like to be able to get RadiusNT up and runnning and do somerealtime testing in parallel with the old system.

Am I dreaming?

Ray__________________________WebFrontwebmaster@webfront.net.auhttp://www.webfront.net.au__________________________

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 19 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Emerald MBR/Company EmployeesFrom: Glen Harvy <root@aquarius.com.au>Date: Thu, 09 Jul 1998 14:18:44 +1000

Hi,

I have a customer who pays me a fixed amount each month for 100 hours totalaccess by his employees. The number of hours each individual uses isirrelevant - only the total hours used by all employees.

I can see how I can add a service for each employee to the MBR however whatwould the rate be for those services?

Glen.--------------------------------------------------------------------AQUARIUS Communications for all your Internet<>Fidonet needs <>Full ISP services<>FrontDoor Commercial<>TransX Internet/FTSC Mailervoice(02)9977-3788<>fax(02)9977-3844<>bbs(02)9977-2855<>3:714/930http://www.aquarius.com.au <> mailto:sales@aquarius.com.au

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 20 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Migration Question Unix/Max4000 -> RadiusNT/Max4000From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 22:02:08 -0700

Ray Brighenti wrote:> > Basically what I'm asking is;> > Is it possible to get the MAX to authenticate from the UNIX box but send> the accounting info the RadiusNT as well.> > I would like to be able to get RadiusNT up and runnning and do some> realtime testing in parallel with the old system.

Yes. Just configure Auth to go to the Unix RADIUS server and Accountingto go to the RadiusNT server.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 21 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Emerald Payment TypesFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 22:03:30 -0700

Glen Harvy wrote:> > Hi Dale,> > The manual refers to a payment type tagged "Invoice" yet there is no such> selection in Emerald.> > Can I assume "Renewal" is the choice if I wish an Invoice to be printed?

Yes. Renewal is what you are looking for.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 22 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Discovering accounting attributesFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 22:23:01 -0700

2Day Internet wrote:> > I need to be sure RadiusNT is recording all of of the accounting attributes> sent by my NAS. Can I do this without understanding what my NAS may be> sending Radius?

If RadiusNT is in text mode, it dumps all the attributes to the detailfile for that NAS. If RadiusNT is in ODBC mode, it *ONLY* records theattributes which match the field names in the calls table. This isclearly outlined in the RadiusNT documentation (including how toupdate it).

> Putting it another way, does the accounting record saved in logfile.txt (all> debug boxs checked) show all of the attributes the NAS is sending, or only> those Radius is configured to receive?

If you are running in debug mode, all the attributes do get stored. Howeber, this is NOT what you want to do. The debug is not meant to be a parseable output and you will take a severe performance hit withdebug enabled.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 23 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: S0002From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 22:39:04 -0700

Victor Alba wrote:> > RadiusNT 2.5 seems to be running ok, I've tested it with Radlogin and> authenticates just fine but just a few minutes ago I saw the following on> the RadiusNT Admin screen:> > If I go to the "ODBC DSN" Tab where I have:> > For Authentication:> -------------------> > DSN - Radius> > And for Accounting:> -------------------> > DSN - Emerald

You should probably have Emerald for Authentication (assuming its asystem DSN pointing to your Emerald database) and uncheck the "use different DSN for acccounting".

> In either of them if I click on the "Check" button. I get the following> message:> > S0002:[Mircrosoft][ODBC SQL Server Driver][SQL Server] Invalid Object Name> 'masterAccounts'

This is most likely because you didn't specify "Emerald" to be the database in the ODBC DSN. Its probably defaulting to the masterdatabase, which doesn't have a masteraccounts table.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 24 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: RadiusNT problem when testingFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 22:44:50 -0700

Allen Mallari wrote:> > Actually, I have another radius ver 2 and it works fine> so what I did is copied this files to my secondary radius> and followed the instruction and I got this error when i> installed radius 2.5> > >> "(null): couldn't open server to find servers"

The RadiusNT 2.5 documentation covers creating a server file and what thecontents should be before running radlogin.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 25 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: running radiusnt as a serviceFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 08 Jul 1998 22:47:57 -0700

William Siradas wrote:> > I am trying to get radiusnt working. When running in -x15 mode it works> fine but after installing and running it as a service it will not> authenticate users. The debug mode shows no errors. I'm stumped. Any> help would be greatly appreciated.

Make sure your DSN is a system DSN.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com