Message 2: Re: Ascend unable to assign IP to dial-up
from "Dale E. Reed Jr." <daler@iea-software.com>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Ascend unable to assign IP to dial-up
From: "Jason Chimney" <jason@cnx.net>
Date: Sat, 20 Jun 1998 14:22:26 -0700
Hi, we have been having quite a bit of trouble getting ascend to assign an
IP address. We have radius running fine on a LINUX box using the following
users info:
initial-banner Password = "ascend" User-Service = Dialout-Framed-User
Reply-Message = "Connexus Communications",
Reply-Message = ""
initial-banner-xxx Password = "ascend" User-Service = Dialout-Framed-User
Reply-Message = "Connexus Communications",
Reply-Message = ""
banner Password = "ascend" User-Service = Dialout-Framed-User
Reply-Message = "Connexus Communications",
Reply-Message = ""
pools-cnxusklwn0100m01 Password = "ascend", User-Service =
Dialout-Framed-User
Ascend-IP-Pool-Definition = "3 206.87.114.169 72"
pools-cnxusklwn0100m02 Password = "ascend", User-Service =
Dialout-Framed-User
Ascend-IP-Pool-Definition = "3 206.87.114.73 96"
pools-cnxusvanc0107m01 Password = "ascend", User-Service =
Dialout-Framed-User
Ascend-IP-Pool-Definition = "3 206.87.114.1 48"
DEFAULT Password = "UNIX"
User-Service = Framed-User, Framed-Protocol = PPP,
Framed-MTU = 1500, Ascend-Assign-IP-Pool = 3,
Ascend-Send-Auth = Send-Auth-PAP,
Ascend-Idle-Limit = 900,
Framed-Compression = Van-Jacobsen-TCP-IP
I am guessing that when we get failed login attempts from
pools-cnxusvanc0107m01 it is the ascend box trying to get the IP address
pool, so I made the followin entries in the RadConfigs table in our MS
Access ODBC database:
RadConfigID
AccountID
RadAttributeID
Data
Value
RadVendorID
RadVendorType
RadCheck
36
4347
217
3 206.87.114.73 96
0
0
0
0
37
4347
6
Dialout-Framed-User
5
0
0
0
38
4328
6
Dialout-Framed-User
5
0
0
0
39
4328
217
3 206.87.114.1 48
0
0
0
0
40
4327
6
Dialout-Framed-User
5
0
0
0
41
4327
217
3 206.87.114.169 72
0
0
0
0
I am hoping that these entries inthe database will duplicate the effect of
the pools-xxxxxxxxxxxx entries in the users file. Can anyone confirm for me
that this is the case, before I take our entire service down testing it?
Thanks for all your help,
Jason Chimney
jason@cnx.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Ascend unable to assign IP to dial-up
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Sat, 20 Jun 1998 23:36:59 -0700
Jason Chimney wrote:
>
> pools-cnxusvanc0107m01 Password = "ascend", User-Service = Dialout-Framed-User
> Ascend-IP-Pool-Definition = "3 206.87.114.1 48"
>
> I am guessing that when we get failed login attempts from
> pools-cnxusvanc0107m01 it is the ascend box trying to get the IP address
> pool, so I made the followin entries in the RadConfigs table in our MS
> Access ODBC database:
>
> RadConfigID
> AccountID
> RadAttributeID
> Data
> Value
> RadVendorID
> RadVendorType
> RadCheck
>
> 36
> 4347
> 217
> 3 206.87.114.73 96
> 0
> 0
> 0
> 0
>
> 37
> 4347
> 6
> Dialout-Framed-User
> 5
> 0
> 0
> 0
This needs to be a CHECK attribute. You don't have the last field (RadCheck)
set to 1 (you have it set to 0, which means it is a reply attribute and will
be sent back to the Ascend). I'm assuming here that the AccountID of 4347
has a login of pools-cnxusklwn0100m02? You need to change the User-Service
to a check attribute on the other ones as well.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com