[RadiusNT Digest]

radiusnt-digest-request@iea-software.com
Thu, 18 Jun 1998 00:00:38 -0700

Message 1: Re: RadiusNT 2.5.124 startup problem
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 2: Re: disconnects
from "Paul Rensel" <paul@ixs.nl>

Message 3: Re: Emerald documentation
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 4: Re: disconnects
from "Josh Hillman" <admin-maillist@talstar.com>

Message 5: RE: disconnects
from "Richard Pedersen" <rich@cybernet1.com>

Message 6: Re:
from "Lorri Thomas" <lorri@cowtown.net>

Message 7: frequent disconnects
from <jason@cnx.net>

Message 8: concurrency control
from "Michael Abrams" <mike@solutions2000.net>

Message 9: Re: frequent disconnects
from "Josh Hillman" <admin-maillist@talstar.com>

Message 10: Re: frequent disconnects
from "Jason Chimney" <jason@cnx.net>

Message 11: Problems with calls table
from "James B. Hrdy" <jhrdy@greensoft.com>

Message 12: New install
from rabaut <rabaut@hcc.cc.fl.us>

Message 13: Re: frequent disconnects
from "Josh Hillman" <admin-maillist@talstar.com>

Message 14: Re: New install
from "OTR Communications, LLC" <otrcomm@sedona.net>

Message 15: Re: New install
from rabaut <rabaut@hcc.cc.fl.us>

Message 16: Re: New install
from "OTR Communications, LLC" <otrcomm@sedona.net>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: RadiusNT 2.5.124 startup problem
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Wed, 17 Jun 1998 00:03:34 -0700

2Day Internet wrote:
>
> >RadiusNT 2.5 should reconnect. What you can do is change the
> >ODBCTimeout
> >registry setting and make it larger so that RadiusNT will wait longer.
> >It is possible that is just not waiting long enough.
>
> Please advise the key path / value as I dont see such a key.

Page 14 of the RadiusNT manual, in the Command line and Registry
Settings chapter, includes the key and information on the
ODBCTimeOut value.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 2 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: disconnectsFrom: "Paul Rensel" <paul@ixs.nl>Date: Wed, 17 Jun 1998 09:14:20 +0200

We had the same problem, the 'stupid' 2.5 software was in 'demo enterprise 'mode instead of standard mode. Probably 100 auths and thats it.

Check you registration in liscenses, licenses and in radadmin.

Best Regards,

-----Original Message-----From: Richard Pedersen <rich@cybernet1.com>To: radiusnt@iea-software.com <radiusnt@iea-software.com>Date: woensdag 17 juni 1998 7:44Subject: disconnects

>Help,>>After upgrading to 2.5 all of a sudden our customers are disconnected after>2 hours.>>What is causing this?>any help will be very much appreciated>>Rich>>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Emerald documentationFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 17 Jun 1998 01:12:41 -0700

Glen Harvy wrote:> > BTW: Is there a Emerald listserve?

Yes. See the mail list link off our home page for all the mail list information.

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: disconnectsFrom: "Josh Hillman" <admin-maillist@talstar.com>Date: Wed, 17 Jun 1998 10:49:39 -0400

> From: Richard Pedersen <rich@cybernet1.com>> After upgrading to 2.5 all of a sudden our customers are disconnectedafter> 2 hours.> What is causing this?> any help will be very much appreciated

When you look at your stop records, what are the disconnect causes? Ifyou're using an Ascend Max, it'll be "Ascend-Disconnect-Cause". I don'tremember what the other NASes use...

Josh Hillmanhillman@talstar.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: disconnectsFrom: "Richard Pedersen" <rich@cybernet1.com>Date: Fri, 17 Oct 1997 09:08:40 -0600

I think I have the problem solved

In the RadAtConfigs table RadAttribureId 27 had data and value of 7200I assumed the value figure should be 1 and the data should be the amount oftime youi want assigned however changing the value to 1 set the sessiontime to 1 second I changed both valued to 21600 and It appears to be workingproperly

Thank-you for your assistance

Rich

> -----Original Message-----> From: radiusnt-request@iea-software.com> [mailto:radiusnt-request@iea-software.com]On Behalf Of Josh Hillman> Sent: Wednesday, June 17, 1998 8:50 AM> To: radiusnt@iea-software.com> Subject: Re: disconnects>>> > From: Richard Pedersen <rich@cybernet1.com>> > After upgrading to 2.5 all of a sudden our customers are disconnected> after> > 2 hours.> > What is causing this?> > any help will be very much appreciated>> When you look at your stop records, what are the disconnect causes? If> you're using an Ascend Max, it'll be "Ascend-Disconnect-Cause". I don't> remember what the other NASes use...>> Josh Hillman> hillman@talstar.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re:From: "Lorri Thomas" <lorri@cowtown.net>Date: Wed, 17 Jun 1998 11:27:49 -0500

I'll get back to you as soon as I hear something from AOL - promise!!-----Original Message-----From: Dale E. Reed Jr. <daler@iea-software.com>To: radiusnt@iea-software.com <radiusnt@iea-software.com>Date: Tuesday, June 16, 1998 2:03 PMSubject: Re:

|Doris Dean wrote:|>|> Dale, I'm getting this message again ... it looks like stopping andstarting radius didn't|> correct the problem ... so long as I don't turn on ODBC in the radiusadministrator all of|> our clients get authenticated. As soon as the ODBC is turned on they geta dialogue box|> asking for a password and radius sends out the message below .... Radiushas been working|> fine for about a year .. the version we are running is 1.16.6 ... theversion of radius|> administrator is 1.1||I would recommend upgrading to RadiusNT 2.5. The below problem could be|one of two|things. The first, and most likely, is a bug in 1.x that is now|starting to show|up as the system gets busier. The second could be an issue with 1.x and|ODBC 3.0|or higher that some customers have reported.||There isn't a lot of advice I can give on a three year old product,|since I wouldn't|know where to start or be able to track the problem to any detail.||> Allocating Statement...|>|> SQL Statement: Select DateAdd(Day, ma.extension, maExpireDate),DateAdd(Day,|> sa.extension, saExpireDate), sa.AccountID, sa.AccountType, sa.Password,sa.Login, sa.Shell|> From MasterAccounts ma, SubAccounts sa Where (sa.Login='mtf' orsa.Shell='mtf') AND|> ma.CustomerID=sa.CustomerID and sa.Active<>0 and ma.Active<>0|>|> LOG: ODBC: SQLExecDirect Error:|> [Microsoft][ODBC SQL Server Driver]Connection is busy with results foranother hstmt|>|> ODBC: SQLExecDirect Error:|> [Microsoft][ODBC SQL Server Driver]Connection is busy with results foranother hstmt|> Sending Reject of id 251 to ce5754fc (secondary)|>|> Thank in advance for your help Dale !!!|>|> Doris||--|Dale E. Reed Jr. (daler@iea-software.com)|_________________________________________________________________| IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs| Internet Solutions for Today | http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: frequent disconnectsFrom: <jason@cnx.net>Date: Wed, 17 Jun 1998 09:49:13 -0700

Hi, does anyone have any ideas why more than a few of our dial up customersare getting disconnected (some say every couple minutes)?

We are running ascend max 4004 boxes.

Thanks for your help.

Jason

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: concurrency controlFrom: "Michael Abrams" <mike@solutions2000.net>Date: Wed, 17 Jun 1998 13:38:26 -0300

This is a multi-part message in MIME format.

------=_NextPart_000_0008_01BD99F5.34C1DF40Content-Type: text/plain; charset="iso-8859-1"Content-Transfer-Encoding: quoted-printable

Hi folks,

I've just gotten my odbc working and would now like to configure =concurrency control. I have tried and it doesn't work actually I don't =understand how the callonline table etc work. Could you folks please =give me some insider help.You can respond personally to mike@solutions2000.net so as not to =clutter up the list.

Thanks guys

Mike

------=_NextPart_000_0008_01BD99F5.34C1DF40Content-Type: text/html; charset="iso-8859-1"Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

Hi folks,
 
I've just gotten my odbc working and =would now=20like to configure  concurrency control.  I have tried and it =doesn't=20work actually I don't understand how the callonline table etc =work.  Could=20you folks please give me some insider help.
You can respond personally to mike@solutions2000.net so as =not to=20clutter up the list.
 
Thanks guys
 
Mike
------=_NextPart_000_0008_01BD99F5.34C1DF40--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: frequent disconnectsFrom: "Josh Hillman" Date: Wed, 17 Jun 1998 13:59:37 -0400> From: jason@cnx.net> Hi, does anyone have any ideas why more than a few of our dial upcustomers> are getting disconnected (some say every couple minutes)?> We are running ascend max 4004 boxes.Chances are your Ascend-Idle-Limit Radius attribute is set too low, and/oryour default Idle timeout settings in the Max are set to low (they're setat 1200 seconds (2 minutes) from the factory. What do your accounting stoprecords say for the "Ascend-Disconnect-Cause"?Josh Hillmanhillman@talstar.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: frequent disconnectsFrom: "Jason Chimney" Date: Wed, 17 Jun 1998 12:47:46 -0700Sorry for sounding stupid, but where exactly to I change these settings? Iam using the MS Access ODBC database.Thanks again for your help,Jason,-----Original Message-----From: Josh Hillman To: radiusnt@iea-software.com Date: Wednesday, June 17, 1998 10:59 AMSubject: Re: frequent disconnects>> From: jason@cnx.net>> Hi, does anyone have any ideas why more than a few of our dial up>customers>> are getting disconnected (some say every couple minutes)?>> We are running ascend max 4004 boxes.>>Chances are your Ascend-Idle-Limit Radius attribute is set too low, and/or>your default Idle timeout settings in the Max are set to low (they're set>at 1200 seconds (2 minutes) from the factory. What do your accounting stop>records say for the "Ascend-Disconnect-Cause"?>>Josh Hillman>hillman@talstar.com>>..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Problems with calls tableFrom: "James B. Hrdy" Date: Wed, 17 Jun 1998 17:03:49 +0000Running RadiusNT with the latest update.Ascend 4048 with latest software update.Ascend DatabaseAllowmalformed packets checkedConcurrency and manual calls update checkedProblem: Calls table is inaccurate and causing the concurrency to not work correctly. RadiusNT thinks the user is still logged in.Any hints from anyone ? Framed-Protocol = PPP (1) User-Service = Framed-User (2) Session-Timeout = 7200 (7200)Sending Ack of id 157 to d01a1663 (route-1) Framed-Protocol = PPP User-Service = Framed-User Session-Timeout = 7200Resp Time: 4066 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1radrecv: Request from host d01a1663 code=4, id=48, length=112 User-Name = "User-Name" NAS-Identifier = 10.0.0.1 NAS-Port = 20201 NAS-Port-Type = Async Acct-Status-Type = Start Acct-Delay-Time = 0 Acct-Session-Id = "266236811" Acct-Authentic = RADIUS Caller-Id = "xxxxx" NAS-Port-DNIS = "xxxx" Framed-Protocol = PPP Framed-Address = xxxxx SQL Statement: INSERT INTO Calls (CallDate,UserName,NASIdentifier,NASPort,NASPortType,AcctStatusType,AcctDelayTime,AcctSessionId,CallerId,FramedAddress) VALUES (Now(),'hannibal','correctip',20201,0,1,0,'26623681','correctid','correctaddress')ODBC Error:23000:-1605: [Microsoft][ODBC Microsoft Access 97 Driver] The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.Sending Accounting Ack of id 48 to d01a1663 (route-1)Resp Time: 1862 Auth: 1/0 -> 1 Acct: 1/0/1 -> 2radrecv: Request from host d01a1663 code=4, id=49, length=89 NAS-Identifier = NAS-Identifier NAS-Port = 20202 NAS-Port-Type = Async Acct-Status-Type = Start Acct-Delay-Time = 0 Acct-Session-Id = "266236812" Acct-Authentic = Local Caller-Id = "Caller-Id" NAS-Port-DNIS = "DNIS" SQL Statement: INSERT INTO Calls (CallDate,NASIdentifier,NASPort,NASPortType,AcctStatusType,AcctDelayTime,AcctSessionId,CallerId, UserName) VALUES (Now(),'ipaddr',20202,0,1,0,'26623681','callerid','NULL')Incomplete accounting record. CallsOnline not updated Sending Accounting Ack of id 49 to d01a1663 (route-1)Resp Time: 3084 Auth: 1/0 -> 1 Acct: 2/0/1 -> 3radrecv: Request from host d01a1663 code=4, id=50, length=185 NAS-Identifier = NAS-Identifier NAS-Port = 20202 NAS-Port-Type = Async Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Session-Id = "266236812" Acct-Authentic = Local Acct-Session-Time = 28 Acct-Input-Octets = 435 Acct-Output-Octets = 474 Acct-Input-Packets = 0 Acct-Output-Packets = 0 Ascend-Disconnect-Cause = 11 Ascend-Connect-Progress = 40 Ascend-Xmit-Rate = 33600 Ascend-Data-Rate = 26400 Ascend-PreSession-Time = 20 Ascend-Pre-Input-Octets = 0 Ascend-Pre-Output-Octets = 0 Ascend-Pre-Input-Packets = 0 Ascend-Pre-Output-Packets = 0 Ascend-Modem-PortNo = 15 Ascend-Modem-SlotNo = 4 Caller-Id = "Caller-Id" NAS-Port-DNIS = "3221896" SQL Statement: INSERT INTO Calls (CallDate,NASIdentifier,NASPort,NASPortType,AcctStatusType,AcctDelayTime,AcctSessionId,AcctSessionTime,AcctInputOctets,AcctOutputOctets,CallerId, UserName) VALUES (Now(),'ipaddr',20202,0,2,0,'26623681',28,435,474,'callerid','NULL')Incomplete accounting record. CallsOnline not updated Sending Accounting Ack of id 50 to d01a1663 (route-1)Resp Time: 591 Auth: 1/0 -> 1 Acct: 3/0/1 -> 4radrecv: Request from host d01a1663 code=1, id=158, length=104 User-Name = "gregchris" Password = "password" NAS-Identifier = NAS-Identifier NAS-Port = 20202 NAS-Port-Type = Async User-Service = Framed-User Framed-Protocol = PPP State = "" Caller-Id = "CallerId" NAS-Port-DNIS = "3221896" Acct-Session-Id = "266236813"rad_authenticate_ODBC() Password = "password" SQL Statement: Select DateDiff('n', Now, DateAdd('d', ma.Extension+1, maExpireDate)), DateDiff('n', Now, DateAdd('d', ma.Extension+1, maExpireDate)), sa.AccountID, sa.AccountType, sa.Password, sa.Login, sa.Shell From MasterAccounts ma, SubAccounts sa Where (sa.Login='gregchris' or sa.Shell='gregchris') AND ma.CustomerID=sa.CustomerID and sa.Active<>0 and ma.Active<>0 Decrypted Password: correct Database Password: correctChecking for duplicate logins. SQL Statement: Select Count(Username) From ServerPorts Where Username='gregchris' and AcctStatusType=1 gregchris found on-line 0 time(s). SQL Statement: Select ra.RadAttributeID, Name, Data, Value, Type, rc.RadVendorID, rc.RadVendorType, rc.RadCheck From RadConfigs rc, RadAttributes ra Where ra.RadAttributeID=rc.RadAttributeID AND rc.AccountID=71James B. Hrdyemail: jhrdy@greensoft.comweb: http://www.greensoft.com/billingGreenSoft Solutions, Inc.Voice: 785.843.8683 ext 2032317 Ponderosa DriveFax: 785.840.0055Lawrence, Ks.United States of America..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: New installFrom: rabaut Date: Wed, 17 Jun 1998 18:15:31 -0400HiI am new to Radius Servers.When I install the server and when i initalize it I get this message...Radius: No such service:radius/udp in your services file.Defaulting to port 1645 for RADIUS Authentication.Radius: No such service:radacct/udp in your services file.Defaulting to port 1646 for RADIUS Authentication.Could somebody please explain them to me??Thanksrabaut@hcc.cc.fl.usHillsborough Community CollegeP.O. Box 5096Tampa, Florida 33675-5096..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: frequent disconnectsFrom: "Josh Hillman" Date: Wed, 17 Jun 1998 18:47:12 -0400> From: Jason Chimney > Sorry for sounding stupid, but where exactly to I change these settings?I> am using the MS Access ODBC database.In the Max: Ethernet --> Answer --> Session Options Idle=(value measured in seconds) --- I accidentally mentioned "1200 = 2 mins" in my previous message. Ascend defaults to 120 seconds = 2 minutes. Ethernet --> Connections --> (whatever) --> Session Options Idle=(value measured in seconds)I don't know how it's set in Radius attributes for Access (we're usingSQL).Josh Hillmanhillman@talstar.com> -----Original Message-----> From: Josh Hillman > To: radiusnt@iea-software.com > Date: Wednesday, June 17, 1998 10:59 AM> Subject: Re: frequent disconnects> > > >> From: jason@cnx.net> >> Hi, does anyone have any ideas why more than a few of our dial up> >customers> >> are getting disconnected (some say every couple minutes)?> >> We are running ascend max 4004 boxes.> >> >Chances are your Ascend-Idle-Limit Radius attribute is set too low,and/or> >your default Idle timeout settings in the Max are set to low (they'reset> >at 1200 seconds (2 minutes) from the factory. What do your accountingstop> >records say for the "Ascend-Disconnect-Cause"?> >> >Josh Hillman> >hillman@talstar.com> >> >..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 14 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: New installFrom: "OTR Communications, LLC" Date: Wed, 17 Jun 1998 17:22:59--=====================_898129379==_Content-Type: text/plain; charset="us-ascii"At 06:15 PM 6/17/98 -0400, you wrote:>Hi>>I am new to Radius Servers.>>When I install the server and when i initalize it I get this message...>>Radius: No such service:radius/udp in your services file.>Defaulting to port 1645 for RADIUS Authentication.>Radius: No such service:radacct/udp in your services file.>Defaulting to port 1646 for RADIUS Authentication.I do not know if this will help, but look in the?:\Winnt\system32\drivers\etc (I have NT Server installed on my D drive, soreplace the "?" with what ever drive you have NT server installed on). Inthe "etc" directory you will fid a file called services (no extension).Open it up with Notepad and scroll down in the file until you get tonumbers <1645 and >1646. Then you want to insert the lines for radius andradacct like they are in the enclosed clip from my services file.This was part of the setup that I had to do for Emerald/RadiusNT.>>Could somebody please explain them to me??>>Thanks>>>>rabaut@hcc.cc.fl.us>Hillsborough Community College>P.O. Box 5096>Tampa, Florida 33675-5096>--=====================_898129379==_Content-Type: text/plain; charset="us-ascii"Content-Disposition: attachment; filename="rabaut.txt"kpop 1109/tcp # Pop with Kerberosphone 1167/udpingreslock 1524/tcpradius 1645/udpradacct 1646/udpmaze 1666/udpnfs 2049/udp # sun nfsknetd 2053/tcp # Kerberos de-multiplexor--=====================_898129379==_Content-Type: text/plain; charset="us-ascii"--=====================_898129379==_--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 15 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: New installFrom: rabaut Date: Wed, 17 Jun 1998 20:44:57 -0400Thanks... that took care of that problem...now... it gives me the message "RadiusNT Standard initialized...." and not the message "waiting for requests" as the instructions state... is that OK??ThanksMikeAt 05:22 PM 6/17/98 -0400, you wrote:>>At 06:15 PM 6/17/98 -0400, you wrote:>>Hi>>>>I am new to Radius Servers.>>>>When I install the server and when i initalize it I get this message...>>>>Radius: No such service:radius/udp in your services file.>>Defaulting to port 1645 for RADIUS Authentication.>>Radius: No such service:radacct/udp in your services file.>>Defaulting to port 1646 for RADIUS Authentication.>>I do not know if this will help, but look in the>?:\Winnt\system32\drivers\etc (I have NT Server installed on my D drive, so>replace the "?" with what ever drive you have NT server installed on). In>the "etc" directory you will fid a file called services (no extension).>Open it up with Notepad and scroll down in the file until you get to>numbers <1645 and >1646. Then you want to insert the lines for radius and>radacct like they are in the enclosed clip from my services file.>>This was part of the setup that I had to do for Emerald/RadiusNT.>>>>Could somebody please explain them to me??>>>>Thanks>>>>>>>>rabaut@hcc.cc.fl.us>>Hillsborough Community College>>P.O. Box 5096>>Tampa, Florida 33675-5096>>kpop 1109/tcp # Pop with Kerberos>phone 1167/udp>ingreslock 1524/tcp>radius 1645/udp>radacct 1646/udp>maze 1666/udp>nfs 2049/udp # sun nfs>knetd 2053/tcp # Kerberos de-multiplexor>>rabaut@hcc.cc.fl.usHillsborough Community CollegeP.O. Box 5096Tampa, Florida 33675-5096..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 16 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: New installFrom: "OTR Communications, LLC" Date: Wed, 17 Jun 1998 17:54:12At 08:44 PM 6/17/98 -0400, you wrote:>Thanks... that took care of that problem...>now... it gives me the message >>"RadiusNT Standard initialized...." >>and not the message >>"waiting for requests" >>as the instructions state... >is that OK??Looks like you have Radius running OK! If you have a user setup, open upanother DOS Command window and see if you can get that user logged on bychanging to the Radius directory and entering:radlogin If you get them logged in, then you are probably OK!>>Thanks>>Mike>>>At 05:22 PM 6/17/98 -0400, you wrote:>>>>At 06:15 PM 6/17/98 -0400, you wrote:>>>Hi>>>>>>I am new to Radius Servers.>>>>>>When I install the server and when i initalize it I get this message...>>>>>>Radius: No such service:radius/udp in your services file.>>>Defaulting to port 1645 for RADIUS Authentication.>>>Radius: No such service:radacct/udp in your services file.>>>Defaulting to port 1646 for RADIUS Authentication.>>>>I do not know if this will help, but look in the>>?:\Winnt\system32\drivers\etc (I have NT Server installed on my D drive, so>>replace the "?" with what ever drive you have NT server installed on). In>>the "etc" directory you will fid a file called services (no extension).>>Open it up with Notepad and scroll down in the file until you get to>>numbers <1645 and >1646. Then you want to insert the lines for radius and>>radacct like they are in the enclosed clip from my services file.>>>>This was part of the setup that I had to do for Emerald/RadiusNT.>>>>>>Could somebody please explain them to me??>>>>>>Thanks>>>>>>>>>>>>rabaut@hcc.cc.fl.us>>>Hillsborough Community College>>>P.O. Box 5096>>>Tampa, Florida 33675-5096>>>kpop 1109/tcp # Pop with Kerberos>>phone 1167/udp>>ingreslock 1524/tcp>>radius 1645/udp>>radacct 1646/udp>>maze 1666/udp>>nfs 2049/udp # sun nfs>>knetd 2053/tcp # Kerberos de-multiplexor>>>>>>>>rabaut@hcc.cc.fl.us>Hillsborough Community College>P.O. Box 5096>Tampa, Florida 33675-5096>