[RadiusNT Digest]

radiusnt-digest-request@iea-software.com
Sat, 13 Jun 1998 00:00:36 -0700

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Previous message: Dale E. Reed Jr.: "Re: USR NetServer x USR NetServer Plus"
Next message: William Salame: "Urgent Problems with RadiusNT and ACC Tigris"

Message 1: Re: server port access
from "Mourad Dahoumane" <mdahoumane@interway.lu>

Message 2: unsubscribe
from Yudhi Haryanto <yudhi@satelindo.co.id>

Message 3: multilink
from "Andrew Hall" <aah@impaq.net.au>

Message 4: unsubscribe radiusnt
from Yudhi Haryanto <yudhi@satelindo.co.id>

Message 5: Time and AccountTypes with a difference
from "Graeme Slogrove" <graeme@fdd.net>

Message 6: unsubscribe
from Brad Barton <brad@mongolnet.mn>

Message 7: Re: unsubscribe
from Webmaster <source1@chas-source.com>

Message 8:
from ericd@sillage.com (Eric Delaunay)

Message 9: Compact RadiusNT v2.5 database?
from postman@cp-tel.net (Postman Account)

Message 10: Re: Compact RadiusNT v2.5 database?
from Dale Reed <daler@iea-software.com>

Message 11: This is so cool
from "Greg Lowthian" <greg@isat.com>

Message 12: RE: time and day restriction
from <jason@cnx.net>

Message 13: Re: Compact RadiusNT v2.5 database?
from postman@cp-tel.net (Postman Account)

Message 14: RE: time and day restriction
from hostmaster@interaxs.net

Message 15: Help: NAS causes radius to pause for 30 seconds to minute
from Thomas Suiter <tsuiter@midusa.net>

Message 16: Re: server port access
from Dale Reed <daler@iea-software.com>

Message 17: Re: Help: NAS causes radius to pause for 30 seconds to minute
from Dale Reed <daler@iea-software.com>

Message 18: Changing machines
from Victor Alba <victor@webjogger.net>

Message 19: Re: Compact RadiusNT v2.5 database?
from Dale Reed <daler@iea-software.com>

Message 20: Re: time and day restriction
from Dale Reed <daler@iea-software.com>

Message 21: Re: Changing machines
from Dale Reed <daler@iea-software.com>

Message 22: ODBC Schema
from "Peter Mott" <peter@2day.net.nz>

Message 23: Re: Time and AccountTypes with a difference
from Dale Reed <daler@iea-software.com>

Message 24: Re: ODBC Schema
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 25: Re: multilink
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 26: Time banking
from "2Day Internet" <peter@2day.net.nz>

Message 27: Re: Help: NAS causes radius to pause for 30 seconds to minute
from "System Administrator" <admin@parod.com>

Message 28: Re: Time banking
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 29: USR NetServer x USR NetServer Plus
from Einstein Oliveira <einstein@yawl.com.br>

Message 30: Re: USR NetServer x USR NetServer Plus
from "Dale E. Reed Jr." <daler@iea-software.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: server port access
From: "Mourad Dahoumane" <mdahoumane@interway.lu>
Date: Fri, 12 Jun 1998 08:53:05 +0200

Dale,

I also used the NAS-Port-Type=ISDN and port limit set to 1.
But this profile connect to an async port. I have set this as a default for
this profile in Emerald Admin/config radius/default
My stupid question now is what the difference between a check attribute and
a reply attribute.

this how it appears in the users file :
Framed-Protocol = 1
NAS-Port-Type = 2
Port-Limit = 1
User-Service = 2

-----Original Message-----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Thursday, June 11, 1998 08:00
Subject: Re: server port access

>Mourad Dahoumane wrote:
>>
>> I am trying to disallow access of analog users to Isdn service.
>> The problem is when you have a NAS with a Pri and a single dialup number.
>> Even if I set port type to async, they still can connect to ISDN,
>> same for isdn users who can connect to analog devices even if port is set
to
>> ISDN.
>> Am I using this parameter incorrectly ?
>>
>> Is there anyone there who has solved this problem ?
>
>You don't need serverport access for this. Just use a Check
>attribute with RadiusNT 2.5 of NAS-Port-Type and the respective
>types. I would guess you were using it as a reply attribute, not
>a check attribute.
>
>--
>Dale E. Reed Jr. (daler@iea-software.com)
>_________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: unsubscribe
From: Yudhi Haryanto <yudhi@satelindo.co.id>
Date: Fri, 12 Jun 1998 14:28:44 +0700

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------ =_NextPart_000_01BD960E.BE6DD720
Content-Type: text/plain

unsubscribe

------ =_NextPart_000_01BD960E.BE6DD720
Content-Type: application/ms-tnef
Content-Transfer-Encoding: base64
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------ =_NextPart_000_01BD960E.BE6DD720--

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: multilink
From: "Andrew Hall" <aah@impaq.net.au>
Date: Fri, 12 Jun 1998 18:06:42 +1000

This is a multi-part message in MIME format.

------=_NextPart_000_005E_01BD962C.DAAE8600
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Question..

Does anyone know of anyway to define different radius reply attributes =
for different connections in a multilink bundle. In other words I want =
to be able to set a session timeout only on one link only of a multilink =
PPP bundle.

Can this be done, will Radiusnt support it?

thanks,
Andrew.

------=_NextPart_000_005E_01BD962C.DAAE8600
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

Question..

Does anyone know of anyway to define =different=20radius reply attributes for different connections in a multilink bundle. =In=20other words I want to be able to set a session timeout only on one link =only of=20a multilink PPP bundle.

Can this be done, will Radiusnt support =it?

thanks,

Andrew.

------=_NextPart_000_005E_01BD962C.DAAE8600--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: unsubscribe radiusntFrom: Yudhi Haryanto Date: Fri, 12 Jun 1998 15:03:52 +0700 unsubscribe radiusnt..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Time and AccountTypes with a differenceFrom: "Graeme Slogrove" Date: Fri, 12 Jun 1998 10:10:25 +0200Hi,Right, now for a real difficult service restrictions ;)All you Emerald / RadiusNT gurus out there, thinking caps on :)We would like to offer a single account that does the following -24 Hour Email AccessWeb access between 01:00 and 17:30 Without having to juggle with the accounts ...Any ideas ? Regards, Graeme---Graeme Slogrove, BSc (Eng) Elec (Wits)FastLight Data Distribution cchttp://www.fdd.netTel: +27-(0)11-706-0212 Fax: +27-(0)11-706-0812..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: unsubscribeFrom: Brad Barton Date: Fri, 12 Jun 1998 18:57:18 +0900unsubscribe..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: unsubscribeFrom: Webmaster Date: Fri, 12 Jun 1998 09:15:41 -0400unsubscribe..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: From: ericd@sillage.com (Eric Delaunay)Date: Sun, 24 May 1998 15:23:25 +0200unsubscribe~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=20Eric DELAUNAY - Chef de Projet -SILLAGE Communication - FRANCE - Mailto:ericd@sillage.com=20~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=20Provider - Creation / Hebergement de Sites Web - SGBD et SQL - INTRANET -=20Liaisons sp=E9cialis=E9es - Developpement Specifiques - Formation -=20Toiles : Http://www.sillage.com - http://www.sillage.fr=20tel : [33][0]5 49 30 03 78 - fax : [33][0]5 49 30 03 79=20~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=20..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Compact RadiusNT v2.5 database?From: postman@cp-tel.net (Postman Account)Date: Fri, 12 Jun 1998 12:53:18 -0500Is there a command line to compact an (RadiusNT) Access 97?..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Compact RadiusNT v2.5 database?From: Dale Reed Date: Fri, 12 Jun 1998 10:57:58 -0700Postman Account wrote:> > Is there a command line to compact an (RadiusNT) Access 97?Use MS Access to do this. There is also a way to do this viathe ODBC configuration (in the ODBC administrator).-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: This is so coolFrom: "Greg Lowthian" Date: Fri, 12 Jun 1998 13:11:36 -0700I just had to put this on the list.For those of you that want to control your systems remotely thisis it.http://www.orl.co.uk/vnc/index.htmlIt works like Remotely Possible but it will work from a browserwith Java also.The best part is its "FREE" iSAT/NT&C Internet Services and Training Greg Lowthian greg@isat.com Operations Manager 619-574-4832 www.isat.com Network Training and Consulting Novell CNE certification classes 619-679-2143 www.nt-c.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: time and day restrictionFrom: Date: Fri, 12 Jun 1998 13:12:02 -0700Sorry if this is covered somewhere on the website but...We just purchased RadiusNT about 2 weeks before 2.5 was released. Is thereany kind of free upgrade period for a month or two after purchasing alicense?Thanks for the info.Jason Chimneyjason@cnx.net-----Original Message-----From: radiusnt-request@iea-software.com[mailto:radiusnt-request@iea-software.com] On Behalf Of Dale ReedSent: Thursday, June 11, 1998 8:03 PMTo: radiusnt@iea-software.comSubject: Re: time and day restrictionChristian Simard wrote:>> Is there possible to restrict users logins based on time or day> restriction? If so, is this feature available with 1.16 radius> or do I have to upgrade to the newest version?The Server Port Aceess option allows time of day restrictions.You need to upgrade to RadiusNT 2.5 for this option.--Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Compact RadiusNT v2.5 database?From: postman@cp-tel.net (Postman Account)Date: Fri, 12 Jun 1998 15:22:06 -0500I'm wanting to do this via command line to automate this process.anyone have any suggestions?At 10:57 AM 6/12/98 -0700, you wrote:>Postman Account wrote:>> >> Is there a command line to compact an (RadiusNT) Access 97?>>Use MS Access to do this. There is also a way to do this via>the ODBC configuration (in the ODBC administrator).>>-- >Dale E. Reed Jr. (daler@iea-software.com)>_________________________________________________________________> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs> Internet Solutions for Today | http://www.iea-software.com>..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 14 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: time and day restrictionFrom: hostmaster@interaxs.netDate: Fri, 12 Jun 1998 16:24:51 -0400Jason,Just go to their ftp site and download the upgrade. If you have purchased2.2, 2.5 is free.JimAt 01:12 PM 6/12/98 -0700, you wrote:>Sorry if this is covered somewhere on the website but...>>We just purchased RadiusNT about 2 weeks before 2.5 was released. Is there>any kind of free upgrade period for a month or two after purchasing a>license?>>Thanks for the info.>>Jason Chimney>jason@cnx.net>>-----Original Message----->From: radiusnt-request@iea-software.com>[mailto:radiusnt-request@iea-software.com] On Behalf Of Dale Reed>Sent: Thursday, June 11, 1998 8:03 PM>To: radiusnt@iea-software.com>Subject: Re: time and day restriction>>Christian Simard wrote:>>>> Is there possible to restrict users logins based on time or day>> restriction? If so, is this feature available with 1.16 radius>> or do I have to upgrade to the newest version?>>The Server Port Aceess option allows time of day restrictions.>You need to upgrade to RadiusNT 2.5 for this option.>>-->Dale E. Reed Jr. (daler@iea-software.com)>_________________________________________________________________> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs> Internet Solutions for Today | http://www.iea-software.com> ----------------------------hostmaster@interaxs.netInterNet Access Network18 McDaniel StreetDayton, OH 45405-4816Voice: 937-461-3660 Fax:937-228-2773..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 15 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Help: NAS causes radius to pause for 30 seconds to minuteFrom: Thomas Suiter Date: Fri, 12 Jun 1998 15:28:23 -0500Radius ver 2.2.41SQL Server 6.5 service pack 4Dual Processor Pentium Pro 200 w/512MB ramRadiusNT & SQL server on same boxAny one heard of this? We have a USR hyper chassis that started lockingup our radius server without any changes (or we can't find them) to theconfig. This system has been in place for a couple of months with noproblems. Summary of what happened/reaction:The radius server would stop authenticating, and did not log anyproblems. Doing a -x15 would show me that 5-10 users would scroll bythen it would hang, and then continue. I stopped, restarted the radiusprocess, rebooted the server, until I noticed that it allways would hangwhen our Hyper chassis would send us info. I rebooted the Hyper chassiswith no luck, then I had the Hyper chassis authenticate off of our unixbox with Livingston radius. This fixed our problem, the RadiusNT serverauthenticated everybody fine. As a work around this is fine, but thisis unacceptable to work for more than a day for billing/accounting.Anybody have any ideas??? I've just moved it back and it doesn't seem dobe reoccuring, but I'd like to maybe have a bit of a reason why thisoccurred. The cpu load was 13%, memory was fine, it would just hang.Thanks... Thomas Suiter-- ____________________________________________________________________________ Thomas P. Suiter | Systems Administrator tsuiter@midusa.net | NetSpace Internet Service Fax: (785) 825-5873 | (785) 823-3565____________________________________________________________________________..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 16 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: server port accessFrom: Dale Reed Date: Fri, 12 Jun 1998 13:54:23 -0700Mourad Dahoumane wrote:> > I also used the NAS-Port-Type=ISDN and port limit set to 1.> But this profile connect to an async port. I have set this as a default for> this profile in Emerald Admin/config radius/default> My stupid question now is what the difference between a check attribute and> a reply attribute.> > this how it appears in the users file :> Framed-Protocol = 1> NAS-Port-Type = 2> Port-Limit = 1> User-Service = 2A Check attriubutes check to see if the value of the attributesreceived in the Authentication request (like Caller-ID, NAS-Port-TYpe,etc) is equal to the value of the same attribute in the Checkattribute itself. If the value is different, the user is rejected.For example, you can set a check attribute of NAS-Port-Type = Async,and prevent the used from loggin on sync/isdn.Check attributes are NOT sent back to the NAS is the accept (reply) list. For example, telling a NAS the NAS-Port-Typeafter the user logs in is pointless (its already established),but telling the NAS how many ports the user can have (Port-Limit)can pevent the user from establihing additional MPP connections.For the users file, check attributes follow the password on thefirst line:user Password = "blah", NAS-Port-Type = Async User-Service = Framed-User Framed-Protoocl = PPP Port-Limit = 1You DO NOT include NAS-Port-Type in the reply list (whih is allattributes after the first line).For a database (RadiusNT 2.5 only), the radcheck field tellsRadiusNT whether the attribute is a check atribute (non zero)or a reply attribute (0).-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 17 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Help: NAS causes radius to pause for 30 seconds to minuteFrom: Dale Reed Date: Fri, 12 Jun 1998 14:04:18 -0700Thomas Suiter wrote:> > The radius server would stop authenticating, and did not log any> problems. Doing a -x15 would show me that 5-10 users would scroll by> then it would hang, and then continue. I stopped, restarted the radius> process, rebooted the server, until I noticed that it allways would hang> when our Hyper chassis would send us info. I rebooted the Hyper chassis> with no luck, then I had the Hyper chassis authenticate off of our unix> box with Livingston radius. This fixed our problem, the RadiusNT server> authenticated everybody fine. As a work around this is fine, but this> is unacceptable to work for more than a day for billing/accounting.What was RadiusNT showing for the resp times for these requests. Where was it hanging (possible on an SQL Statement).One thing that could be causing the problem is something locking a tablefor a short amount of time, which would cause RadiusNT to hang on theSQL connection. And ODBC trace should show some iteresting numbers ifthis is the case.I'd also be interested in seeing if the multi-thread design ofRadiusNT 2.5 would work around the problem. Was it happening withaccounting or auth requests? Next timeit happens cut/paste thefull request and send it to me (radercv to resp line).-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 18 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Changing machinesFrom: Victor Alba Date: Fri, 12 Jun 1998 17:05:15 -0400We've gotten to the point that we need to change Emerald and Radius onto adifferent machine and wanted to ask for advice as to what's the safest wayto go about this. Since we are moving onto a new machine we'll take theadvantage to upgrade radius from 2.2 to 2.5. We've already got SQL in thenew machine; should I just copy everything to the new machine and then runthe Radius upgrade... those who have done it may give some advice as towhat steps to follow to minimize mistakes-Victor ..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 19 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Compact RadiusNT v2.5 database?From: Dale Reed Date: Fri, 12 Jun 1998 14:07:56 -0700Postman Account wrote:> > I'm wanting to do this via command line to automate this process.> > anyone have any suggestions?See the command line options for MS Access. Specifically the/compact option will compact a database and exit.> At 10:57 AM 6/12/98 -0700, you wrote:> >Postman Account wrote:> >>> >> Is there a command line to compact an (RadiusNT) Access 97?> >> >Use MS Access to do this. There is also a way to do this via> >the ODBC configuration (in the ODBC administrator).-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 20 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: time and day restrictionFrom: Dale Reed Date: Fri, 12 Jun 1998 14:12:51 -0700jason@cnx.net wrote:> > Sorry if this is covered somewhere on the website but...It is.> We just purchased RadiusNT about 2 weeks before 2.5 was released. Is there> any kind of free upgrade period for a month or two after purchasing a> license?Please see the RadiusNT 2.5 announcement on our website home pageas it includes all the answers to your questions. -- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 21 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Changing machinesFrom: Dale Reed Date: Fri, 12 Jun 1998 14:55:27 -0700Victor Alba wrote:> > We've gotten to the point that we need to change Emerald and Radius onto a> different machine and wanted to ask for advice as to what's the safest way> to go about this. Since we are moving onto a new machine we'll take the> advantage to upgrade radius from 2.2 to 2.5. We've already got SQL in the> new machine; should I just copy everything to the new machine and then run> the Radius upgrade... those who have done it may give some advice as to> what steps to follow to minimize mistakesWhat I would do is create a new Database (with seperate log and datadatabase devices) of the size of your current Database. Then useSQL Enterprise Manager to transfer the database over to the newmachine. Then just change your ODBC configuraions (and Emerald clientlogins) to point to the new machine. Its actually fairlystraightforwardto do. You can run the rad25_up.sql after you transfer the database andjust install RadiusNT on the new machine. This will give you time totest everything before switching over to production.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 22 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: ODBC SchemaFrom: "Peter Mott" Date: Sat, 13 Jun 1998 10:16:26 +1200Whats the difference between columns Extension and Overdue in tableMasterAccounts?The manual describes both as 'An extension, in days to the expiration date'regardsPeter MottChief Enthusiast2Day Internet Limited...------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 23 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Time and AccountTypes with a differenceFrom: Dale Reed Date: Fri, 12 Jun 1998 15:19:32 -0700Graeme Slogrove wrote:> > All you Emerald / RadiusNT gurus out there, thinking caps on :)> > We would like to offer a single account that does the following -> > 24 Hour Email Access> Web access between 01:00 and 17:30> > Without having to juggle with the accounts ...Without getting to technical, RadiusNT 2.5 uses stored proceduresfor retrieving the attributes for a user. The typical one usedis RadATConfigs, which pulls the service default attributes fromRadConfigs table. Now, if you are SQL Savvy, you could ehnace thestored procedure to check time of day and account type and includea different set of attributes. What I was more of less thinkng ofwas adding a start/stop field to the table, then modifying the procwith an additional where clause like: AND( (DatePart(Hour, GetDate()) >= StartHour AND DatePart(Hour, GetDate()) < StopHour OR StartHour = NULL)So for your Filter, you woudl have:Attribute Value StartHour StopHourFramed-Filter "email" 1 18Whereas the rest would have NULL start/stop hour numbers andbe included in both.Sometimes I can come up with the wierdest things! :)-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 24 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: ODBC SchemaFrom: "Dale E. Reed Jr." Date: Fri, 12 Jun 1998 15:34:43 -0700Peter Mott wrote:> > Whats the difference between columns Extension and Overdue in table> MasterAccounts?> > The manual describes both as 'An extension, in days to the expiration date'Nothing unless you are using Emerald. With Emerald, the Extensionis reset after a payment is received (its a temp extend) where asthe OverDue is a permenant extend that doesn't change.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 25 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: multilinkFrom: "Dale E. Reed Jr." Date: Fri, 12 Jun 1998 15:38:15 -0700> Andrew Hall wrote:> > Question..> > Does anyone know of anyway to define different radius reply attributes for> different connections in a multilink bundle. In other words I want to be able> to set a session timeout only on one link only of a multilink PPP bundle.> > Can this be done, will Radiusnt support it?I'm not sure if a NAS supports this. It would be interested to try,though. What you could do to see if it would work if connect thefirst channel, change the Session-Timeout to a low number (like say three minutes) and then connect the second channel. If the secondchannels drops in three minutes, then it is supported. I wouldguess that MOST nases see the ports as a single session, though.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 26 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Time bankingFrom: "2Day Internet" Date: Sat, 13 Jun 1998 10:58:07 +1200I am testing my understanding of Time Banking.The text in the manual suggests an amount of time (in minutes) is allocatedto a subaccount in column 'timeleft'.One would imagine there would be a trigger on the stop record insert whichdecremented 'time left' by the number of minutes spent in the last session.I dont see one in RadiusNT.sqlYou dont happen to have such a trigger sitting around waiting for a goodhome do you?My staging NAS is a Netserver/8i and it does not seem to be recognising theSession-Timeout attribute I can see RadiusNT sending it at authenticationtime.It just lets the user stay connected ... any ideas?regardsPeter MottChief Enthusiast2Day Internet Limited...------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 27 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Help: NAS causes radius to pause for 30 seconds to minuteFrom: "System Administrator" Date: Fri, 12 Jun 1998 18:00:41 -0500Thomas,It sounds like there is some characters in your users file that radiusdoesn't like. Try using the text editor that iea software has on there ftpsite to view your users file.Darryl Etter - CSN-----Original Message-----From: Thomas Suiter To: radiusnt@iea-software.com Date: Friday, June 12, 1998 3:28 PMSubject: Help: NAS causes radius to pause for 30 seconds to minute>Radius ver 2.2.41>SQL Server 6.5 service pack 4>Dual Processor Pentium Pro 200 w/512MB ram>RadiusNT & SQL server on same box>>Any one heard of this? We have a USR hyper chassis that started locking>up our radius server without any changes (or we can't find them) to the>config. This system has been in place for a couple of months with no>problems.>>>Summary of what happened/reaction:>>The radius server would stop authenticating, and did not log any>problems. Doing a -x15 would show me that 5-10 users would scroll by>then it would hang, and then continue. I stopped, restarted the radius>process, rebooted the server, until I noticed that it allways would hang>when our Hyper chassis would send us info. I rebooted the Hyper chassis>with no luck, then I had the Hyper chassis authenticate off of our unix>box with Livingston radius. This fixed our problem, the RadiusNT server>authenticated everybody fine. As a work around this is fine, but this>is unacceptable to work for more than a day for billing/accounting.>>>>Anybody have any ideas??? I've just moved it back and it doesn't seem do>be reoccuring, but I'd like to maybe have a bit of a reason why this>occurred. The cpu load was 13%, memory was fine, it would just hang.>>Thanks...> Thomas Suiter>>>-->____________________________________________________________________________>> Thomas P. Suiter | Systems Administrator> tsuiter@midusa.net | NetSpace Internet Service> Fax: (785) 825-5873 | (785) 823-3565>____________________________________________________________________________>>..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 28 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Time bankingFrom: "Dale E. Reed Jr." Date: Fri, 12 Jun 1998 16:05:49 -07002Day Internet wrote:> > I am testing my understanding of Time Banking.> > The text in the manual suggests an amount of time (in minutes) is allocated> to a subaccount in column 'timeleft'.> > One would imagine there would be a trigger on the stop record insert which> decremented 'time left' by the number of minutes spent in the last session.> I dont see one in RadiusNT.sql> > You dont happen to have such a trigger sitting around waiting for a good> home do you?See below. The second part of the trigger must have been missed when theradiusnt.sql file was created.Alternately, you can turn on the Manual Service update to have RadiusNTitself update the subaccounts.CREATE TRIGGER calls_insert ON Calls FOR INSERTAS UPDATE ServerPorts Set sp.UserName = i.UserName, sp.AcctStatusType = i.AcctStatusType, sp.CallDate = DateAdd(Second, 0-i.AcctDelayTime, i.CallDate), sp.FramedAddress = i.FramedAddress FROM Servers s, ServerPorts sp, inserted i WHERE s.IPAddress = i.NASIdentifier AND s.ServerID = sp.ServerID AND sp.Port = i.NASPort AND (DateAdd(Second, 0-i.AcctDelayTime, i.CallDate) >= sp.CallDate OR sp.CallDate IS NULL) UPDATE SubAccounts Set sa.TimeLeft = sa.TimeLeft - (i.AcctSessionTime/60 + 1) FROM SubAccounts sa, inserted i WHERE sa.login = i.UserName and sa.TimeLeft <> NULL and i.AcctStatusType = 2GO> My staging NAS is a Netserver/8i and it does not seem to be recognising the> Session-Timeout attribute I can see RadiusNT sending it at authentication> time.> > It just lets the user stay connected ... any ideas?Check with USR to see if they support that attribute. Its possible thatthey don't.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 29 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: USR NetServer x USR NetServer PlusFrom: Einstein Oliveira Date: Sat, 13 Jun 1998 00:26:03 -0300Hi, I don't think that this is a problem with RadiusNT but maybe this happened withsomeone in this list. Actually we have a few USR NetServer 16 V.34 working with Radius 2.2.41 andeverything is fine with IP's being automatically assigned by the NetServer. Now we're trying to put a USR NetServer Plus V.34 to work with these guys butthere are some problems that I can't figure out why they are happening. When I connect through NetServer Plus the call is authenticated only if theFramed-Addres attribute is set in the RadConfigs to the account; If not (wichhas been working perfectly with old NetServers) the connection is dropped and inboth cases no account records are generated in the calls table. I checked the configuration of NetServer Plus a hundred times and could notfind any errors. If someone have successfully configured NetServer Plus please tell me what I'mdoing wrong.Thanks, Einstein Oliveira..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 30 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: USR NetServer x USR NetServer PlusFrom: "Dale E. Reed Jr." Date: Fri, 12 Jun 1998 22:36:31 -0700Einstein Oliveira wrote:> > Hi,> > I don't think that this is a problem with RadiusNT but maybe this happened with> someone in this list.> > Actually we have a few USR NetServer 16 V.34 working with Radius 2.2.41 and> everything is fine with IP's being automatically assigned by the NetServer.> > Now we're trying to put a USR NetServer Plus V.34 to work with these guys but> there are some problems that I can't figure out why they are happening.> > When I connect through NetServer Plus the call is authenticated only if the> Framed-Addres attribute is set in the RadConfigs to the account; If not (wich> has been working perfectly with old NetServers) the connection is dropped and in> both cases no account records are generated in the calls table.Could it be that you don't have an address pool configured on the NS Plus?-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com

Previous message: Dale E. Reed Jr.: "Re: USR NetServer x USR NetServer Plus"
Next message: William Salame: "Urgent Problems with RadiusNT and ACC Tigris"