Re: Dedicated Link (Nailed Up Link)

Rudy Komsic ( (no email) )
Thu, 11 Jun 1998 05:06:59 -0400

This is a multi-part message in MIME format.

------=_NextPart_000_001E_01BD94F6.C30CBEE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

If your using Emerald with RadiusNT, You can edit the actual user's =
Radius Configuration by clicking on the service tab > edit the username =
> and select the Radius tab to create your Radius Profile for that =
specific user.

-----Original Message-----
From: Ciro Vera <cirovera@interaccess.cl>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: June 10, 1998 1:11 PM
Subject: Re: Dedicated Link (Nailed Up Link)
=20
=20
=20
> Define dedicated. I assume you are talking about a NAILED PPP =
connection
Yes..... Sorry my english :(
=20
I'm looking for information in Ascend Site and found this:
=20
=20
=20
To establish a nailed-up link between two MAX TNT units, and have =
the connection use the channels in group 1, you would configure the =
pseudo-user profile as follows:
=20
permconn-SanFran-1 Password=3D"ascend", =
User-Service=3DDialout-Framed-User
User-Name=3D"LA",
Framed-Protocol=3DPPP,
Framed-Address=3D50.1.1.2,
Framed-Netmask=3D255.0.0.0,
Ascend-Route-IP=3DRoute-IP-Yes,
Ascend-Metric=3D7,
Framed-Routing=3DNone,
Ascend-Idle-Limit=3D0,
Ascend-Call-Type=3DNailed,
Ascend-Group=3D"1",
Ascend-FT1-Caller=3DFT1-Yes
=20
Then my question now is:
RadiusNT (in ODBC mode) work with pseudo-user profiles?
=20
=20
Thanks
Ciro Vera

------=_NextPart_000_001E_01BD94F6.C30CBEE0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

If your using Emerald with RadiusNT, =You can=20edit the actual user's Radius Configuration by clicking on the service =tab >=20edit the username > and select the Radius tab to create your Radius =Profile=20for that specific user.
 
-----Original =Message-----
From:=20 Ciro Vera <cirovera@interaccess.cl>To:=20 radiusnt@iea-software.com=20 <radiusnt@iea-software.com&g=t;
Date:=20 June 10, 1998 1:11 PM
Subject: Re: Dedicated Link =(Nailed Up=20 Link)


> Define =dedicated.  I=20 assume you are talking about a NAILED PPP connection
Yes..... =Sorry my=20 english :(

I'm looking for information in Ascend Site and =found=20 this:



To establish a nailed-up link between two MAX =TNT=20 units, and have the connection use the channels in group 1, you =would=20 configure the pseudo-user profile as =follows:

permconn-SanFran-1=20 Password=3D"ascend",=20 =User-Service=3DDialout-Framed-User
      =;       User-Name=3D"LA",            = Framed-Protocol=3DPPP,
       =;      Framed-Address=3D50.1.1.2,
 =            F=ramed-Netmask=3D255.0.0.0,
       &=nbsp;     Ascend-Route-IP=3DRoute-IP-Yes,
&nb=sp;           &nbs=p;Ascend-Metric=3D7,
        &=nbsp;    Framed-Routing=3DNone,
   =          Ascend-Idle-L=imit=3D0,
          =   Ascend-Call-Type=3DNailed,
    &=nbsp;        Ascend-Group=3D"=;1",
          =   Ascend-FT1-Caller=3DFT1-Yes

Then=20 my question now is:
RadiusNT (in ODBC mode) work with pseudo-user = profiles?


Thanks
Ciro =Vera

------=_NextPart_000_001E_01BD94F6.C30CBEE0--