..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 2 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: CallsOnline still not working!!From: "Peter Mott" <peter@2day.net.nz>Date: Wed, 10 Jun 1998 19:32:45 +1200
>I'll assume you mean 2.5.124.
>If the trigger is installed (you can right-click over the calls table>in Enterprise manager to see if there is a trigger on the calls table)>then there are two other issues.
Nope, no trigger, and I've checked radiusnt.sql and it dont have it therefrom what I can see, will check your site again.
>First, make sure you are actually receiving accounting information from>your NAS (debug will show requests with an Acct-Status-Type line).
>Secondly, make sure you added entrires to your ServerPorts table for>each port of each server. The ServerID field should match the ServerID>from from the Servers table, and the Port field should match the entries>in the NAS-port attribute of your accounting records.
This was done ok.
Peter MottChief Enthusiast2Day Internet Limited.
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: CallsOnline still not working!!From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 10 Jun 1998 00:44:12 -0700
Peter Mott wrote:> > Nope, no trigger, and I've checked radiusnt.sql and it dont have it there> from what I can see, will check your site again.
Ok. I updated the script. > Can you post the CREATE TRIGGER script to list so I can paste it right in?
CREATE TRIGGER calls_insert ON Calls FOR INSERTAS UPDATE ServerPorts Set sp.UserName = i.UserName, sp.AcctStatusType = i.AcctStatusType, sp.CallDate = DateAdd(Second, 0-i.AcctDelayTime, i.CallDate), sp.FramedAddress = i.FramedAddress FROM Servers s, ServerPorts sp, inserted i WHERE s.IPAddress = i.NASIdentifier AND s.ServerID = sp.ServerID AND sp.Port = i.NASPort AND (DateAdd(Second, 0-i.AcctDelayTime, i.CallDate) >= sp.CallDate OR sp.CallDate IS NULL)GO > >First, make sure you are actually receiving accounting information from> >your NAS (debug will show requests with an Acct-Status-Type line).> > It creates start and stop records ok
You could have turned Manual Calls update on to achieve the samefunction as the trigger.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: CallsOnline still not working!!From: "Peter Mott" <peter@2day.net.nz>Date: Wed, 10 Jun 1998 20:19:50 +1200
>Ok. I updated the script.
Seems to be ok now. I had better do a comparison between the tworadiusnt.sql scripts to see what other differences may be waiting to hit me.
Thanks for your time.
regards
Peter MottChief Enthusiast2Day Internet Limited.
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Issues after upgrading radius from 2.2.25 to 2.5.124From: Sheldon Edwards <slick@caribsurf.com>Date: Wed, 10 Jun 1998 09:23:56 -0500
Hi All,
Has anyone been able to succesfully do this. We were looking at thedatabase schema in Radius 2.5 and there are plenty of changes to thedatabase schema used in 2.2. What we are wondering is whether we should:
1. Dump the information from the SQL database, kill the database, runthe radius 2.5 script to re-create the database and reload the data.
or
2. Run a script to upgrade radius from 2.2. to 2.5
Thanks....
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Issues after upgrading radius from 2.2.25 to 2.5.124From: "George G. Stossel" <STOSSEL@DACOR.COM>Date: Wed, 10 Jun 1998 09:44:39 -0400
Sheldon,
Yes, It can be done. We did it while our server rejected all incomingcalls and the complaint line rang off the hook. I suggest thefollowing:
Install 2.5 in a separate directory and move a copy of your database tothat directory.
Open the database and import any tables from the sample radius97.mdbthat are not in you 2.2 database.
Add the additional data elements that appear in the radius97.mdb forlike named tables.
Rename NASPort to Port in the tables and queries in your 2.2 databasethat the 2.5 sample show as being named differently. This will alsoaffect any reports you have defined, but this can be down after 2.5 isup and running.
Run the admin GUI and set your parameters. Install the service thenstop and restart.
Keep the manual handy as it has all of the table and registry changesdocumented, but not in roadmap form. You will have to simply comparewhat's in the book to what's on your server and make the changes.
George
George G. Stossel, President Phone:419.352.3568DACOR, Inc. FAX: 419.353.0149519 W. Wooster Street Sales: 800.447.5333Bowling Green, OH 43402-2763 03 USA Email:stossel@dacor.com WWW: http://www.dacor.com/
-----Original Message----- From: Sheldon Edwards [SMTP:slick@caribsurf.com] Sent: Wednesday, June 10, 1998 10:24 AM To: RadiusNT Subject: Issues after upgrading radius from 2.2.25 to2.5.124
Hi All,
Has anyone been able to succesfully do this. We were looking atthe database schema in Radius 2.5 and there are plenty of changes tothe database schema used in 2.2. What we are wondering is whether weshould:
1. Dump the information from the SQL database, kill thedatabase, run the radius 2.5 script to re-create the database and reload thedata.
or
2. Run a script to upgrade radius from 2.2. to 2.5
Thanks....
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: RadiusNT WhatsUpGold setting?From: "greg Lowthian" <greg@isat.com>Date: Wed, 10 Jun 1998 07:09:56 -0700
Send Command On Connect= aD\@,0123456789012345\a\fusername\b%18passwordExpect Command Responce= \cD\@Port=1645UDP
> > Can anyone share their WhatsUpGold settings for Radius (expect/send> settings)?> > Thanks!> Zak Wolfinger email: zak@cyberlink.com> CyberLink, Inc. voice: (219) 235-1400> 213 S Main Street fax: (219) 235-1599> South Bend, IN 46601 www: http://www.wolfinger.net/zak> >
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: BIG !!!!! Problem Installing Install-Shield maded Software with RadiusNt2.2 service activeFrom: Andrea Cariola <andrea.cariola@eutron.com>Date: Wed, 10 Jun 1998 16:16:53 +0200
Hi all!We have a license for RadiusNt 2.2.
I have a big problem on a server running Windows NT 4 SP3: i can'tinstall programs maded with InstallShield 3 (such as Netscape 4,Cheyenne backup, Hp drivers for DAT unit, and many other....). I haveCurrently an incident case opened with Microsoft tech support becauseeven many of their product are packaged with InstallShield.Today i tried to install a software on another Nt4 server Sp3 that i useas a test pc; the last test i maded on it was with RadiusNt (beforeinstalling the iea-software on the other server) so the service wasstill active.When i have seen on this test machine that any software was notinstalling, like in the other server, i have tried eliminate the onlything the two server have in common RADIUS NT from IEA-SW!!!!!Et voila'.....all worked fine (!!!!!!!!!!!) in the test pc; at thispoint i disabled radius on the main setver too and... et voila'...allworked FINE!!!!!!
Solution from iea tech support ????!!!!!
Thanks in advanceAndrea CariolaEutron Infosecurity
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Caller-Id with RadiusNT v2.5From: postman@cp-tel.net (Postman Account)Date: Wed, 10 Jun 1998 09:35:37 -0500
How do we get the Caller-ID field to populate in our RadiusNT v2.5 calls table?
Anything special to do to make it work?
Can this info be recorded in the RadLogs table? ....in another column? If so, how?
If it isn't possible to have it displayed inthe Radlogs table, I wish it would be possible in a future release... a Caller-Id column in the RadLogs table.
Please repond!
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Upgrading from RadiusNT v2.2 to RadiusNT v2.5From: "Lawrence Watkins Work" <lwatkins-work@thepark.net>Date: Wed, 10 Jun 1998 09:36:13 -0500
I would like a copy of the code. Please send it to sysop@mixcom.com
-----Original Message-----From: radiusnt-request@iea-software.com[mailto:radiusnt-request@iea-software.com]On Behalf Of Brad AlbrechtSent: Tuesday, June 09, 1998 11:59 PMTo: radiusnt@iea-software.comSubject: RE: Upgrading from RadiusNT v2.2 to RadiusNT v2.5
I have some VB5 code that will do most of the database changes to aRadius2.2 Access database to make it work with Radius2.5 (notice I saymost). If someone is interested in taking what I have and making it work,let me know and I will email you the source. VB5 SP3 is required.
What I have done so far is look at the Schema that Dale put in the docs andused DAO to create the tables/fields/etc. in the existing 2.2 database. Ifyou know VB and DAO, there are probably a lot of people that would like tosee this work.
Brad AlbrechtComputer Innovations Online
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 11 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: DigestFrom: "jmercer" <radiusnt@ultravision.net>Date: Wed, 10 Jun 1998 09:58:17 -0500
How do we set this list to digest, it is not on the help command page?
Jerry MercerUltra-VisionInternet - jmercer@ultravision.net
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 12 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: RadiusNT WhatsUpGold setting?From: smart@cyberun.netDate: Wed, 10 Jun 1998 11:22:41 -0400
Make Sure You Tell Radius to allow requests from whatever ip address whatsup gold is on At 07:09 AM 6/10/98 -0700, you wrote:>Send Command On Connect= aD\@,0123456789012345\a\fusername\b%18password>Expect Command Responce= \cD\@>Port=1645>UDP>>> >> Can anyone share their WhatsUpGold settings for Radius (expect/send>> settings)?>> >> Thanks!>> Zak Wolfinger email: zak@cyberlink.com>> CyberLink, Inc. voice: (219) 235-1400>> 213 S Main Street fax: (219) 235-1599>> South Bend, IN 46601 www: http://www.wolfinger.net/zak>> >> >>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 13 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Issues after upgrading radius from 2.2.25 to 2.5.124From: Sheldon Edwards <slick@caribsurf.com>Date: Wed, 10 Jun 1998 11:43:31 -0500
Thanks for the advice. However, we jhave one very slight problem.... Ourdatabase is SQL Server. Any other ideas....
George G. Stossel wrote:
> Sheldon,>> Yes, It can be done. We did it while our server rejected all incoming> calls and the complaint line rang off the hook. I suggest the> following:>> Install 2.5 in a separate directory and move a copy of your database to> that directory.>> Open the database and import any tables from the sample radius97.mdb> that are not in you 2.2 database.>> Add the additional data elements that appear in the radius97.mdb for> like named tables.>> Rename NASPort to Port in the tables and queries in your 2.2 database> that the 2.5 sample show as being named differently. This will also> affect any reports you have defined, but this can be down after 2.5 is> up and running.>> Run the admin GUI and set your parameters. Install the service then> stop and restart.>> Keep the manual handy as it has all of the table and registry changes> documented, but not in roadmap form. You will have to simply compare> what's in the book to what's on your server and make the changes.>> George>> George G. Stossel, President Phone:> 419.352.3568> DACOR, Inc. FAX: 419.353.0149> 519 W. Wooster Street Sales: 800.447.5333> Bowling Green, OH 43402-2763 03 USA Email:> stossel@dacor.com> WWW: http://www.dacor.com/>> -----Original Message-----> From: Sheldon Edwards [SMTP:slick@caribsurf.com]> Sent: Wednesday, June 10, 1998 10:24 AM> To: RadiusNT> Subject: Issues after upgrading radius from 2.2.25 to> 2.5.124>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 14 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Text backupFrom: "Frank Wanicka" <frank@thewowfactor.com>Date: Wed, 10 Jun 1998 12:07:38 -0400
I tried to test this feature. I received an error about not having anenterprise license (which we don't have). Is this something only forenterprise users? we are very interested in this function.____________________Frank Wanicka
-----Original Message-----From: Dale E. Reed Jr. <daler@iea-software.com>To: radiusnt@iea-software.com <radiusnt@iea-software.com>Date: Tuesday, June 09, 1998 3:07 AMSubject: Re: Text backup
>Ronnie D. Franklin wrote:>>>> Could someone provide me what the following modes do???>>>> Text Backup>>Text backup is a semi-experimental option for ODBC mode.>>> I assume this uses the text file if the ODBC database can't be found, butI would like a more detailed senario....>>Yes. Basically if RadiusNT loads the users file when it starts and>if it runs into ODBC problems, it will fail over to the text list.>This hasn't been tested that much and there still is a lot of>issues to deal with.>>> From Database>>>> Not sure about this one....>>Basically, this option is suppose to tell RadiusNT to load the user>list from the database and save it to the users file, as well as use>it for ODBC problems. Its really just a shy step past theory right>now. Both of those options should really be invisible, but I>decided to see if someone want to play with them and give some feedback>so far.>>Dale E. Reed Jr. (daler@iea-software.com)
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 15 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: Text backupFrom: ronnie@itexas.net (Ronnie D. Franklin)Date: Wed, 10 Jun 1998 11:16:06 -0500
I am running the Standard Emerald and used it when I was doing my consolidation.... the phone did not ring so I guess it worked just fine with the Emerald license.
I did however turn it off and restarted Radius after I was finished... as I do not want to be running it on a daily basis until I have had some time to test it.
Ronnie@itexas.net
On Wednesday, June 10, 1998 11:08 AM, Frank Wanicka [SMTP:frank@thewowfactor.com] wrote:> I tried to test this feature. I received an error about not having an> enterprise license (which we don't have). Is this something only for> enterprise users? we are very interested in this function.> ____________________> Frank Wanicka>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 16 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RadiusNT Licensing ModesFrom: "Graeme Slogrove" <graeme@fdd.net>Date: Wed, 10 Jun 1998 18:10:32 +0200
Hi,
Have just upgraded to RadiusNT 2.5.124 on our auth machine. The question I have is that when it is initialized, it shows as
RadiusNT (Emerald Standard) Initialized
Before I put the odbc connection in, I noticed it ran as
RadiusNT (Enterprise)
I read in the release notes that Emerald clients get RadiusNT Enterprise at no charge.
Can someone please confirm that (Emerald Standard) and (Enterprise)mean the same thing ? :)
Regards, Graeme
---Graeme Slogrove, BSc (Eng) Elec (Wits)FastLight Data Distribution cchttp://www.fdd.netTel: +27-(0)11-706-0212 Fax: +27-(0)11-706-0812
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 17 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Text backupFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 10 Jun 1998 09:11:53 -0700
Frank Wanicka wrote:> > I tried to test this feature. I received an error about not having an> enterprise license (which we don't have). Is this something only for> enterprise users? we are very interested in this function.
Yes. The fault tolerance options like text backup are Enterprise features.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 18 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RADIUSNT ODBC errorsFrom: "Mark Berkheimer" <markb@panetwork.com>Date: Wed, 10 Jun 1998 12:26:49 -0400
We are using Ascend Max 4000 series and get an error on our accountingserver.
[microsoft][ODBC Microsoft Access 97 Driver] Index or PRimary key can'tcontain a null value.
The calls table has nothing listed in it, but the database grows bymegabytes every couple days. So it must be trying to write but the dabasesays no, something is missing.
Any help?ThanksMarkHave just upgraded to RadiusNT 2.5.124 on our auth machine. Thequestion I have is that when it is initialized, it shows as
RadiusNT (Emerald Standard) Initialized
Before I put the odbc connection in, I noticed it ran as
RadiusNT (Enterprise)
I read in the release notes that Emerald clients get RadiusNTEnterprise at no charge.
Can someone please confirm that (Emerald Standard) and (Enterprise)mean the same thing ? :)
Regards, Graeme
---Graeme Slogrove, BSc (Eng) Elec (Wits)FastLight Data Distribution cchttp://www.fdd.netTel: +27-(0)11-706-0212 Fax: +27-(0)11-706-0812
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 19 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: unsubscribeFrom: mike@nwoknet.net (Mike Buie)Date: Tue, 9 Jun 1998 02:05:08 -0500
-unsubscribe
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 20 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: DigestFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 10 Jun 1998 09:25:17 -0700
jmercer wrote:> > How do we set this list to digest, it is not on the help command page?
Subscribe to radiusnt-digest rather than radiusnt (send teh request toradiusnt-digest-request). I'll update the info.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 21 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Caller-Id with RadiusNT v2.5From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 10 Jun 1998 09:36:04 -0700
Postman Account wrote:> > How do we get the Caller-ID field to populate in> our RadiusNT v2.5 calls table?> > Anything special to do to make it work?
Your NAS (RADIUS client) must include it in the accounting packets. Youmust also have a column in your Calls table called CallerID.
> Can this info be recorded in the RadLogs table?> ...in another column? If so, how?
Not currently. > If it isn't possible to have it displayed in> the Radlogs table, I wish it would be possible> in a future release... a Caller-Id column> in the RadLogs table.
It will be.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 22 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Issues after upgrading radius from 2.2.25 to 2.5.124From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 10 Jun 1998 09:37:27 -0700
Sheldon Edwards wrote:> > Has anyone been able to succesfully do this. We were looking at the> database schema in Radius 2.5 and there are plenty of changes to the> database schema used in 2.2. What we are wondering is whether we should:> > 1. Dump the information from the SQL database, kill the database, run> the radius 2.5 script to re-create the database and reload the data.> > or> > 2. Run a script to upgrade radius from 2.2. to 2.5
Just run the rad25_up.sql script against your against and it willupdate it.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 23 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: RadiusNT WhatsUpGold setting?From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 10 Jun 1998 09:39:32 -0700
greg Lowthian wrote:> > Send Command On Connect= aD\@,0123456789012345\a\fusername\b%18password> Expect Command Responce= \cD\@> Port=1645> UDP
If you do this, you'll get a log entry each time WUPG checks. Not agood thing, especially if you are using RadiusNT in ODBC mode).
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 24 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Malformed packets RadiusNT v2.5From: postman@cp-tel.net (Postman Account)Date: Wed, 10 Jun 1998 11:51:31 -0500
I've enabled accept malformed accounting packetsin RadiusNT v2.5 Administrator.
What does this option do?
If packets are malformed, are they still processed?
If not, why accept them...? ...or why would you enable this option?
Please explain... thanks in advance!
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 25 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Dedicated Link (Nailed Up Link)From: "Ciro Vera" <cirovera@interaccess.cl>Date: Wed, 10 Jun 1998 13:03:51 -0000
This is a multi-part message in MIME format.
------=_NextPart_000_01BD9470.372F32D0Content-Type: text/plain; charset=ISO-8859-1Content-Transfer-Encoding: 7bit
> Define dedicated. I assume you are talking about a NAILED PPP connectionYes..... Sorry my english :(
I'm looking for information in Ascend Site and found this:
To establish a nailed-up link between two MAX TNT units, and have theconnection use the channels in group 1, you would configure the pseudo-userprofile as follows:
permconn-SanFran-1 Password="ascend", User-Service=Dialout-Framed-User User-Name="LA", Framed-Protocol=PPP, Framed-Address=50.1.1.2, Framed-Netmask=255.0.0.0, Ascend-Route-IP=Route-IP-Yes, Ascend-Metric=7, Framed-Routing=None, Ascend-Idle-Limit=0, Ascend-Call-Type=Nailed, Ascend-Group="1", Ascend-FT1-Caller=FT1-Yes
Then my question now is:RadiusNT (in ODBC mode) work with pseudo-user profiles?
ThanksCiro Vera------=_NextPart_000_01BD9470.372F32D0Content-Type: text/html; charset=ISO-8859-1Content-Transfer-Encoding: quoted-printable
> Define dedicated. I =assume you are talking about a NAILED PPP connection
Yes..... Sorry =my english :(
I'm looking for information in Ascend Site and =found this:
To establish a nailed-up link between two MAX =TNT units, and have the connection use the channels in group 1, you =would configure the pseudo-user profile as =follows:
permconn-SanFran-1 Password=3D"ascend", =User-Service=3DDialout-Framed-User
= &=nbsp;User-Name=3D"LA",
= &=nbsp;Framed-Protocol=3DPPP,
= &=nbsp;Framed-Address=3D50.1.1.2,
= &=nbsp;Framed-Netmask=3D255.0.0.0,
= &=nbsp;Ascend-Route-IP=3DRoute-IP-Yes,
= &=nbsp;Ascend-Metric=3D7,
= &=nbsp;Framed-Routing=3DNone,
= &=nbsp;Ascend-Idle-Limit=3D0,
= &=nbsp;Ascend-Call-Type=3DNailed,
= &=nbsp;Ascend-Group=3D"1",
= &=nbsp;Ascend-FT1-Caller=3DFT1-Yes
Then my question now =is:
RadiusNT (in ODBC mode) work with pseudo-user =profiles?
Thanks
Ciro Vera
------=_NextPart_000_01BD9470.372F32D0--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 26 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: FAQsFrom: Gil Date: Wed, 10 Jun 1998 13:25:41 -0400Hi, I'm Gil, and I'm new to the list.I like eggs.I was wondering if there were any FAQ-type info-sheets available for Radiusso I don't have to clog up the list with a bunch of dumb questions. Anyone?Thanks in advance,+-Gil Young------------------------------------City Online-+ "Those who desire to give up freedom in order to gain security will not have, nor do they deserve, either one."+----------------------------------[Thomas Jefferson]------+..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 27 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Text backupFrom: "Greg Lowthian" Date: Wed, 10 Jun 1998 11:07:53 -0700I did the 2.5 install and everything went well.I tried Text Backup and no luck. In -x15 mode it showsthat it is repeatedly trying to make an ODBC connectionwhile SQL is stopped. Also I tried it in both mode(text & ODBC) and -x15 shows it not finding a usernamein the ODBC database and trying the userfile but it cantfind it there either.Not Found in ODBC, Checking users file...rad_auth(): user_find(glowthia) error = Neither User Nor DefaultNameAuthenticate: from isatdev - Neither User Nor Default Name:glowthiaSending Reject of id 185 to d14d0706 (isatdev)..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 28 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: FAQsFrom: Sheryl Stover Date: Wed, 10 Jun 1998 11:58:15 -0700 (PDT)Hi Gil,There are a couple of FAQ lists online, one general at http://www.iea-software.com/radiusnt/faqs.htmland one technical at http://www.iea-software.com/radiusnt/rnttechfaqs.htmlIn addition, you can search for any topic in our mailing list archivesby going to our search form page at:http://www.iea-software.com/search/Hope those get you started on the right track!-SherylOn Wed, 10 Jun 1998, Gil wrote:: Hi, I'm Gil, and I'm new to the list.: : I like eggs.: : I was wondering if there were any FAQ-type info-sheets available for Radius: so I don't have to clog up the list with a bunch of dumb questions. Anyone?: : Thanks in advance,: : +-Gil Young------------------------------------City Online-+: "Those who desire to give up freedom in order to gain : security will not have, nor do they deserve, either one.": +----------------------------------[Thomas Jefferson]------+: Sheryl D. Stover sds@iea-software.comIEA Software Sales http://www.iea-software.com509.444.2455 x 51 (voice) Emerald ISP Management Suite509.624.9903 (fax) RadiusNT..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 29 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: FAQsFrom: "Dale E. Reed Jr." Date: Wed, 10 Jun 1998 12:32:01 -0700Gil wrote:> > Hi, I'm Gil, and I'm new to the list.> > I like eggs.> > I was wondering if there were any FAQ-type info-sheets available for Radius> so I don't have to clog up the list with a bunch of dumb questions. Anyone?There is a trouble shooting and FAQ section on the website. Additionaly,might want to check out the Web site search, since it includes the mailing lists (which is like a big FAQ in itself).-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 30 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: RadiusNT Licensing ModesFrom: "Dale E. Reed Jr." Date: Wed, 10 Jun 1998 12:54:14 -0700Graeme Slogrove wrote:> > Have just upgraded to RadiusNT 2.5.124 on our auth machine. The> question I have is that when it is initialized, it shows as> > RadiusNT (Emerald Standard) Initialized> > Before I put the odbc connection in, I noticed it ran as> > RadiusNT (Enterprise)> > I read in the release notes that Emerald clients get RadiusNT> Enterprise at no charge.> > Can someone please confirm that (Emerald Standard) and (Enterprise)> mean the same thing ? :)Confirmed.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 31 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: server port accessFrom: "Mourad Dahoumane" Date: Wed, 10 Jun 1998 23:13:45 +0200Hello,I am trying to disallow access of analog users to Isdn service.The problem is when you have a NAS with a Pri and a single dialup number.Even if I set port type to async, they still can connect to ISDN,same for isdn users who can connect to analog devices even if port is set toISDN.Am I using this parameter incorrectly ?Is there anyone there who has solved this problem ?Mourad DahoumaneConnexion Interway..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 32 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: server port accessFrom: "Dale E. Reed Jr." Date: Wed, 10 Jun 1998 22:56:27 -0700Mourad Dahoumane wrote:> > I am trying to disallow access of analog users to Isdn service.> The problem is when you have a NAS with a Pri and a single dialup number.> Even if I set port type to async, they still can connect to ISDN,> same for isdn users who can connect to analog devices even if port is set to> ISDN.> Am I using this parameter incorrectly ?> > Is there anyone there who has solved this problem ?You don't need serverport access for this. Just use a Check attribute with RadiusNT 2.5 of NAS-Port-Type and the respectivetypes. I would guess you were using it as a reply attribute, nota check attribute.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 33 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Dedicated Link (Nailed Up Link)From: "Dale E. Reed Jr." Date: Wed, 10 Jun 1998 23:28:52 -0700Ciro Vera wrote:> > > Define dedicated. I assume you are talking about a NAILED PPP connection> Yes..... Sorry my english :(> > I'm looking for information in Ascend Site and found this:> > To establish a nailed-up link between two MAX TNT units, and have the> connection use the channels in group 1, you would configure the pseudo-user> profile as follows:> > permconn-SanFran-1 Password="ascend", User-Service=Dialout-Framed-User> User-Name="LA",> Framed-Protocol=PPP,> Framed-Address=50.1.1.2,> Framed-Netmask=255.0.0.0,> Ascend-Route-IP=Route-IP-Yes,> Ascend-Metric=7,> Framed-Routing=None,> Ascend-Idle-Limit=0,> Ascend-Call-Type=Nailed,> Ascend-Group="1",> Ascend-FT1-Caller=FT1-Yes> > Then my question now is:> RadiusNT (in ODBC mode) work with pseudo-user profiles?Yes. Psuedo just means its not really a user, but its still a userentry.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com