Re: no authentication

Josh Hillman ( (no email) )
Fri, 5 Jun 1998 15:32:45 -0400

> From: CNX Accounting <jason@cnx.net>
> The radlogs table shows:
> ID: 1664 Radlogmsgid: 10 logdate: date
> Username: pools-cnxusvanc0107m01 data: ascend

Check the following:
Ethernet --> Mod Config --> WAN options
Make sure that you have as many IPs in your pool(s) as you have
modems.

Go into your Max and change the following setting:
Ethernet --> Mod Config --> Auth
Auth Pool =
Change it to "No"

You will have to reset the Max after this or you'll never free up the IPs.
After setting and saving the above option:
Hit ^d then d (diagnostics)
Type in:
fsave
fclear
nvr (this resets the max)

Josh Hillman
hillman@talstar.com