Re: Error 650 on dial up

Lorri Thomas ( (no email) )
Tue, 2 Jun 1998 07:43:25 -0500

Pardon my ignorance, but I'm a newbie....
What accounting Stop records? How would I check? Evidently the accounting
is not "turned on", because I can't find the disconnect records anywhere
other than the Calls table which just shows how long they were on. Care to
point me to the steps for getting this working?

NAS is NT

Lorri A. Thomas
Email: lorri@cowtown.net
Phone: 817-293-9353
- or 972-730-2010
Fax: 817-293-9076

"More hay, Trigger?"
"No thanks, Roy, I'm stuffed!"

-----Original Message-----
From: Josh Hillman <admin-maillist@talstar.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Friday, May 29, 1998 6:27 PM
Subject: Re: Error 650 on dial up

>From: Lorri Thomas <lorri@cowtown.net>
>We are running Radius (ver. 2.02.41) on an NT server for authentication
>only. My customers (and even myself on occasion) get an error 650 when
>dialing in. I searched MS KB & it says to disable PPTP, however, we don't
>even have that installed. Has anyone experienced this? I found nothing in
>the archives.
>
>
>Are you tracking accounting STOP records at all? If so, check out the
>disconnect causes. What type of NAS are you using? The error messages
>that come back from Windows aren't nearly as descriptive or conclusive as
>what the NAS reports in the accounting STOP records.
>
>Josh Hillman
>hillman@talstar.com
>