I've added the Framed-User and Protocol like you suggest me
but I does not change anything.
Here is what I have in the RadConfigs table:
RadConfigID AccountID RadAttributeID Data
---------------------------------------------
13 659 6 Framed-User
14 659 7 PPP
15 659 8
207.139.145.150
16 659 10 Broadcast-Listen
17 659 13 Van-Jacobsen-TCP-IP
Here is what I get from radius when I try to connect to the AS5200:
Allocating Statement...
SQL Statement: Select ra.RadAttributeID, Name, Data, Value, Type From
RadConfi
s rc, RadAttributes ra Where ra.RadAttributeID=rc.RadAttributeID AND
rc.Account
D=659
User-Service = Framed-User (1)
Framed-Protocol = PPP (1)
Framed-Address = 207.139.145.150 (1)
Framed-Routing = Broadcast-Listen (1)
Framed-Compression = Van-Jacobsen-TCP-IP (1)
Freeing SQL Statement...
Sending Ack of id 141 to cf8b9105 (cisco5-2.netc.net)
User-Service = Login-User
Framed-Protocol = PPP
Framed-Address = 207.139.145.150
Framed-Routing = Broadcast
Framed-Compression = Van-Jacobsen-TCP-IP
thanks for your help!
>Christian Simard wrote:
>>
>> I'v assigned a static IP Address to a user in the Radconfigs table.
>> Without a static IP, there is no problem to get authentified by
>> the CISCO AS5200 but with the static IP, the user get disconnected
>> immediatly after "Framed-Address". Here is a the radius debug screen
>> snapshoot and a debug of AAA made on the CISCO AS5200:
>
>You most likely need more than just Framed-Address. Try adding
>User-Service=Framed-User, and Framed-Protocol=PPP as well.
>RadiusNT does NOT add the RadConfigs entries to the RadATConfigs
>entries. Its one or the other.
>
>> I use Radius NT 1.16 with SQL server but I have the same problem with 2.2
>>
>> thank you for your help!
>>
>> RADIUS NT:
>> =========
>>
>> Allocating Statement...
>>
>> SQL Statement: Select ra.RadAttributeID, Name, Data, Value, Type From
>> RadConfig
>> s rc, RadAttributes ra Where ra.RadAttributeID=rc.RadAttributeID AND
>> rc.AccountI
>> D=659
>>
>> Framed-Address = 207.139.145.150 (1)
>> Freeing SQL Statement...
>> Sending Ack of id 181 to cf8b9105 (cisco5-2.netc.net)
>> Framed-Address = 207.139.145.150
>>
>> Response Time: 230
>>
>> CISCO AS5200:
>> ============
>>
>> AAA/AUTHEN/START (0): port='Async36' list='' action=LOGIN service=PPP
>> AAA/AUTHEN/START (0): using "default" list
>> AAA/AUTHEN/START (397743627): Method=RADIUS
>> AAA/AUTHEN (397743627): status = GETPASS
>> AAA/AUTHEN/CONT (397743627): continue_login
>> AAA/AUTHEN (397743627): status = GETPASS
>> AAA/AUTHEN (397743627): Method=RADIUS
>> AAA/AUTHEN (397743627): status = PASS
>> AAA/AUTHOR/LCP: authorize LCP
>> AAA/AUTHOR (0): user='simardc'
>> AAA/AUTHOR (0): send AV service=ppp
>> AAA/AUTHOR (0): send AV protocol=lcp
>> AAA/AUTHOR (623322683): Method=RADIUS
>> AAA/AUTHOR (623322683): Post authorization status = ERROR
>>
>> Same login with Livingston RADIUS:
>> =================================
>>
>> %LINK-3-UPDOWN: Interface Async26, changed state to up
>> AAA/AUTHEN: create_user user='simardc' ruser='' port='Async26'
>> rem_addr='async/8
>> 718373' authen_type=2 service=3 priv=1
>> AAA/AUTHEN/START (0): port='Async26' list='' action=LOGIN service=PPP
>> AAA/AUTHEN/START (0): using "default" list
>> AAA/AUTHEN/START (511843121): Method=RADIUS
>> AAA/AUTHEN (511843121): status = GETPASS
>> AAA/AUTHEN/CONT (511843121): continue_login
>> AAA/AUTHEN (511843121): status = GETPASS
>> AAA/AUTHEN (511843121): Method=RADIUS
>> AAA/AUTHEN (511843121): status = PASS
>> AAA/AUTHOR/LCP: authorize LCP
>> AAA/AUTHOR (0): user='simardc'
>> AAA/AUTHOR (0): send AV service=ppp
>> AAA/AUTHOR (0): send AV protocol=lcp
>> AAA/AUTHOR (638391897): Method=RADIUS
>> AAA/AUTHOR (638391897): Post authorization status = PASS_REPL
>> AAA/AUTHOR/LCP: Async26: Processing AV routing*true
>> AAA/AUTHOR/FSM (0): can we start IPCP?
>> AAA/AUTHOR (0): user='simardc'
>> AAA/AUTHOR (0): send AV service=ppp
>> AAA/AUTHOR (0): send AV protocol=ip
>> AAA/AUTHOR (62202857): Method=RADIUS
>> AAA/AUTHOR (62202857): Post authorization status = PASS_REPL
>> AAA/AUTHOR/FSM: we can start IPCP for protocol 0x8021
>> AAA/AUTHOR/IPCP: Async26: start: her address 0.0.0.0, we want
207.139.145.169
>> AAA/AUTHOR/IPCP: Async26: Processing AV addr=207.139.145.150
>> AAA/AUTHOR/IPCP: Async26: Processing AV routing*true
>> AAA/AUTHOR/IPCP: Async26: set routing to TRUE
>> AAA/AUTHOR/IPCP: Async26: authorization succeeded
>> AAA/AUTHOR/IPCP: Async26: done: her address 0.0.0.0, we want
207.139.145.150
>> AAA/AUTHOR/IPCP: Async26: authorization succeeded
>> AAA/AUTHOR/IPCP: Async26: start: her address 0.0.0.0, we want
207.139.145.150
>> AAA/AUTHOR/IPCP: Async26: Processing AV addr=207.139.145.150
>> AAA/AUTHOR/IPCP: Async26: Processing AV routing*true
>
>--
>Dale E. Reed Jr. (daler@iea-software.com)
>_________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com
>
>
*----------------------------------------------------------*
Christian Simard (System Administrator)
Net Communications Inc.
Acces-Cible Inc.
Tel.: (514) 346-3401
Fax : (514) 346-3587
e-mail: simardc@netc.net
web: http://www.netc.net
*----------------------------------------------------------*