Message 2: Re: RadiusNT v2.2 dies after a day or so
from Sheldon Edwards <slick@caribsurf.com>
Message 3: Users Online Inaccurate?
from "Eric Powers" <eric@river-valley.net>
Message 4: static IP
from Christian Simard <simardc@netc.net>
Message 5: Re: static IP
from "Danny Sinang" <danny@uplink.com.ph>
Message 6: Re: RadiusNT v2.2 dies after a day or so
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 7: Re: Users Online Inaccurate?
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 8: Re: Users Online Inaccurate?
from "Lawrence Watkins Work" <lwatkins-work@thepark.net>
Message 9: RE: RadiusNT v2.2 dies after a day or so
from "Wilhelm Lehmann" <wilhelm@acetron.co.za>
Message 10: RadiusNT 2.5 problem
from "Zak Wolfinger" <zak@cyberlink.com>
Message 11: Static IP w/ ISDN
from Robb Bryn <rbryn@cape-fear.net>
Message 12: Re: Static IP w/ ISDN
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 13: Re: [data] RadiusNT 2.5 problem
from "Dale E. Reed Jr." <daler@iea-software.com>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: RadiusNT v2.2 dies after a day or so
From: "Ed Miller" <emiller@del.net>
Date: Wed, 27 May 1998 08:02:45 -0400
IMHO, I have to agree with Jeff. Helps alot getting people on line fast.
>At 01:51 PM 5/26/98 -0700, you wrote:
>>>
>>> Do you think it be more stable if I ran it with radius -x15
>>> mode... as opposed to an NT service... ? ...at least
>>> until our new server... that we will be using... with MS SQL...
>>> arrives this week?
>>
>>I doubt it would be any more stable, but atleast you would be
>>able to see what the problem is, and possibly a way to correct
>>or work around it.
>
>FWIW, folks, I've never tried to run RadiusNT as a service -- I've always
>preferred the -x15 display mode, as it is IMO (sorry, Dale) far more stable
>and in any case, far easier to debug problems. My current installation of
>2.2.59 has been up and running for five months without a problem, in -x15
>mode, and would have been up longer (I so believe) had we not relocated and
>thus we were forced to power down the system for the move.
>
>Perhaps the service mode is stable, but there's something to be said for
>being able to watch the authentications pass by on screen. A user calls
>and says "I can't get online", and you can ask them to try while you watch
>the screen, and you can watch the rejection happen in real time, so you can
>determine right then and there what the user's difficulty is -- bad
>password, expired account, etc. Its VERY useful to have that -x15 display
>on-screen (also useful for those times when it DOES have to reboot -- you
>can watch it load the Radius attributes and make its ODBC connection -- you
>know it started up properly!).
>
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: RadiusNT v2.2 dies after a day or so
From: Sheldon Edwards <slick@caribsurf.com>
Date: Wed, 27 May 1998 08:11:24 -0500
On this note, has Radius 2.5 been developed for the Alpha machine yet....
Dale E. Reed Jr. wrote:
> RadiusNT 2.5 has the ability to log any -x debug level to a file, while its
> running as a service. I've used the tail with -f over a network to watch the
> logfile, as if I were at the console. We are working on a monitor app for the
> V3 release that does this over the network w/out creating the logfile.
>
> Also, in ODBC mode, there is the RadLogs table that is fairly handy for
> seeing a list of the problems that have come through (like bad password,
> expired account etc). Emerald 2.5 will display/search the logs and it
> should aid in support to resolve the whining users problems.
>
> I'd highly recommend anyone who is having problems with RadiusNT 2.2 to
> upgrade to RadiusNT 2.5. Heck, I'd recommend everyone upgrade to
> RadiusNT 2.5, because you just don't know what you are missing until
> you do. :)
>
> --
> Dale E. Reed Jr. (daler@iea-software.com)
> _________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Users Online Inaccurate?
From: "Eric Powers" <eric@river-valley.net>
Date: Wed, 27 May 1998 07:11:47 -0500
Anyone know why Emerald reports a higher number of users online than there
actually are? These users appear to be accumulating time as well even
though they are not actually on. What is this doing to the accounting data?
Will that customer be billed for time they didn't actually spend on-line?
What is the fix?
Eric Powers
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 4 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: static IP
From: Christian Simard <simardc@netc.net>
Date: Wed, 27 May 1998 09:56:31 -0400
Hi!
I would like to know how can I assign a static IP Address to a user with
radius NT. I use Radius NT 1.16 with SQL server (ODBC mode)
thanks!
*----------------------------------------------------------*
Christian Simard (System Administrator)
Net Communications Inc.
Acces-Cible Inc.
Tel.: (514) 346-3401
Fax : (514) 346-3587
e-mail: simardc@netc.net
web: http://www.netc.net
*----------------------------------------------------------*
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 5 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: static IP
From: "Danny Sinang" <danny@uplink.com.ph>
Date: Wed, 27 May 1998 22:28:54 +0800
Insert a row into the RadConfigs table and set the following column's to
these values:
AcctId = account ID of user
RadAttributeID = 8
Data = the IP address you want to assign the user.
- Danny Sinang
-----Original Message-----
From: Christian Simard <simardc@netc.net>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Wednesday, May 27, 1998 10:10 PM
Subject: static IP
>
>Hi!
>
>I would like to know how can I assign a static IP Address to a user with
>radius NT. I use Radius NT 1.16 with SQL server (ODBC mode)
>
>thanks!
>
>
>
>
>*----------------------------------------------------------*
>Christian Simard (System Administrator)
>Net Communications Inc.
>Acces-Cible Inc.
>Tel.: (514) 346-3401
>Fax : (514) 346-3587
>e-mail: simardc@netc.net
>web: http://www.netc.net
>*----------------------------------------------------------*
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 6 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: RadiusNT v2.2 dies after a day or so
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Wed, 27 May 1998 08:29:35 -0700
Sheldon Edwards wrote:
>
> On this note, has Radius 2.5 been developed for the Alpha machine yet....
Yes. We actually have much better support for the Alpha now, including
a full install and RadiusNT administrator. I don't have the full package
ready to do, but I will send you the executable to try.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Users Online Inaccurate?From: "Dale E. Reed Jr." <daler@iea-software.com>Date: Wed, 27 May 1998 08:37:49 -0700
Eric Powers wrote:> > Anyone know why Emerald reports a higher number of users online than there> actually are? These users appear to be accumulating time as well even> though they are not actually on. What is this doing to the accounting data?> Will that customer be billed for time they didn't actually spend on-line?
The on-line is based on the stop record and the current date/time. Theactually billing is based on the stop record, which includes the exacttime on from the NAS.
One thing you can do to help this situation, is make sure you have thenew trigger that I posted to the list a while back. It correctly handles out of order accounting records, which is the main causefor something like this.
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Users Online Inaccurate?From: "Lawrence Watkins Work" <lwatkins-work@thepark.net>Date: Wed, 27 May 1998 10:49:54 -0500
I looked for the trigger and was not able to find it.Perhaps you could post the location to d/l it at.Lar-----Original Message-----From: Dale E. Reed Jr. <daler@iea-software.com>To: radiusnt@iea-software.com <radiusnt@iea-software.com>Date: Wednesday, May 27, 1998 5:48 AMSubject: Re: Users Online Inaccurate?
>Eric Powers wrote:>>>> Anyone know why Emerald reports a higher number of usersonline than there>> actually are? These users appear to be accumulating timeas well even>> though they are not actually on. What is this doing tothe accounting data?>> Will that customer be billed for time they didn'tactually spend on-line?>>The on-line is based on the stop record and the currentdate/time. The>actually billing is based on the stop record, whichincludes the exact>time on from the NAS.>>One thing you can do to help this situation, is make sureyou have the>new trigger that I posted to the list a while back. Itcorrectly>handles out of order accounting records, which is the maincause>for something like this.>>-->Dale E. Reed Jr. (daler@iea-software.com)>_________________________________________________________________> IEA Software, Inc. | RadiusNT, Emerald, and NTFAQs> Internet Solutions for Today |http://www.iea-software.com>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: RadiusNT v2.2 dies after a day or soFrom: "Wilhelm Lehmann" <wilhelm@acetron.co.za>Date: Wed, 27 May 1998 17:57:22 +0200
Please refresh my memory, How do I unsubscribe again
Regards, Wilhelm Lehmann
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 10 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RadiusNT 2.5 problemFrom: "Zak Wolfinger" <zak@cyberlink.com>Date: Wed, 27 May 1998 14:30:22 -0500
I just upgraded to RadiusNT 2.5.100 and am having new problems withthe ServerAccess portion. Here is the debug session:
RadiusNT 2.5.100 Copyright (c) 1995-1997 IEA Software, Inc. All Rights Reserved, Worldwide
Some portions Copyright (c) 1992 Livingston Enterprises, Inc. and Copyright (c) 1995 Ascend Communications, Inc.
0) Mode: 11) IgnoreCase: 12) TrimName: 03) AuthPort: 16454) ReqAcctAuth: 15) AllowMalformed: 06) AcctPort: 16467) Proxy: 08) Options: 3309) Debug: 1510) LogFile:11) AcctLogFile:12) ODBCDatasource: Radius13) Username: zak14) Password: hubbabubba15) AcctODBCDatasource:16) AcctUsername:17) AcctPassword:18) DataDirectory: c:\radius19) AcctDirectory: c:\radius\acct20) UsersFile: Users21) CompanyName: CyberLink, Inc.22) License: **REMOVED**
Param: Debug Level: 15Initializing Winsock...ODBC Datasource: 'Radius'...Making ODBC Connection...MS Access Mode EnabledODBC Datasource: 'Radius'...Making ODBC Connection...MS Access Mode EnabledAllocating Statement...
SQL Statement: Select Name, RadAttributeID, Type From RadAttributes
SQL Statement: Select ra.Name, rv.Name, rv.Value From RadValues rv,RadAttributes ra Where rv.RadAttributeID = ra.RadAttributeID
121 Dictionary Attributes Loaded...
SQL Statement: Select Server, IPAddress, Secret From Servers
12 Clients LoadedAccounting Column 0 (16): 'NASIdentifier'Accounting Column 1 (4): 'NASPort'Accounting Column 2 (8): 'AcctSessionId'Accounting Column 3 (2): 'AcctStatusType'Accounting Column 4 (16): 'CallDate'Accounting Column 5 (12): 'UserName'Accounting Column 6 (2): 'AcctAuthentic'Accounting Column 7 (2): 'UserService'Accounting Column 8 (2): 'LoginService'Accounting Column 9 (16): 'LoginHost'Accounting Column 10 (4): 'AcctDelayTime'Accounting Column 11 (4): 'AcctSessionTime'Accounting Column 12 (4): 'FramedProtocol'Accounting Column 13 (16): 'FramedAddress'Accounting Column 14 (4): 'AcctInputOctets'Accounting Column 15 (4): 'AcctOutputOctets'Accounting Column 16 (4): 'AcctInputPackets'Accounting Column 17 (4): 'AcctOutputPackets'Accounting Column 18 (2): 'NASPortType'Accounting Column 19 (10): 'ClientPortDNIS' 20 Accounting Columns Loaded
RadiusNT Standard Initialized...
radrecv: Request from host d0ea9cb7 code=1, id=130, length=65 User-Name = "LUSER" Password = "REMOVED" NAS-Identifier = 208.234.156.183 NAS-Port = 28 NAS-Port-Type = Asyncrad_authenticate_ODBC() Password = "REMOVED"
SQL Statement: Select DateDiff('n', Now, DateAdd('d', ma.Extension+1,maExpireDate)), DateDiff('n', Now, DateAdd('d', ma.Extension+1, maExpireDate)),sa.AccountID, sa.AccountType, sa.Password, sa.Login, sa.Shell, sa.LoginLimit