[RadiusNT Digest]

radiusnt-digest-request@iea-software.com
Wed, 27 May 1998 00:00:55 -0700

Message 1: NASIdentifier not written to calls table
from <fx2@eon.adcdatel.com>

Message 2: Missing OCX files
from "Frank Nowling" <frankn@netropolis.net>

Message 3: Re: Missing OCX files
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 4: Re: NASIdentifier not written to calls table
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 5: UUCP type cutomers
from "Lawrence Watkins Work" <lwatkins-work@thepark.net>

Message 6: Re: NASIdentifier not written to calls table
from <fx2@eon.adcdatel.com>

Message 7: Re: NASIdentifier not written to calls table
from hostmaster@interaxs.net

Message 8: Re: NASIdentifier not written to calls table
from <fx2@eon.adcdatel.com>

Message 9: Problem with Reports
from "Eric Powers" <eric@river-valley.net>

Message 10: Problem with Reports
from "Eric Powers" <eric@river-valley.net>

Message 11: Re: NASIdentifier not written to calls table
from hostmaster@interaxs.net

Message 12: RadiusNT v2.2 dies after a day or so
from postman@cp-tel.net (Postman Account)

Message 13: Total Control & NAS Ports...
from Robb Bryn <rbryn@cape-fear.net>

Message 14: Re: RadiusNT v2.2 dies after a day or so
from hostmaster@interaxs.net

Message 15: Re: Total Control & NAS Ports...
from postman@cp-tel.net (Postman Account)

Message 16: Re: NASIdentifier not written to calls table
from <fx2@eon.adcdatel.com>

Message 17: Re: NASIdentifier not written to calls table
from hostmaster@interaxs.net

Message 18: NAS - FILTER SETUP FOR USR TOTAL CONTROL UNIT - EMAIL ONLY ACCOUNTS -
from "Andrew Tadros (Kober Enterprise)" <atadros@continuum.org>

Message 19: Re: RadiusNT v2.2 dies after a day or so
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 20: Re: RadiusNT v2.2 dies after a day or so
from postman@cp-tel.net (Postman Account)

Message 21: Setting Idle Timeout for all accounts?
from Robb Bryn <rbryn@cape-fear.net>

Message 22: Re: Setting Idle Timeout for all accounts?
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 23: Re: RadiusNT v2.2 dies after a day or so
from "Dale E. Reed Jr." <daler@iea-software.com>

Message 24: Re: RadiusNT v2.2 dies after a day or so
from Jeff Woods <jwoods@delta.com>

Message 25: Re: Total Control & NAS Ports...
from "Eric Powers" <eric@river-valley.net>

Message 26: Update CallsOnline error
from Mike Gent <gent@pond.net>

Message 27: Re: RadiusNT v2.2 dies after a day or so
from "Dale E. Reed Jr." <daler@iea-software.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: NASIdentifier not written to calls table
From: <fx2@eon.adcdatel.com>
Date: Tue, 26 May 1998 08:56:22 -0400 (EDT)

I'm running radius 2.2.41 in odbc mode.. NASIdentifier doesn't get written
to the calls table. It does show up in the callsonline table though. (I
think I added NASIdentifier as a field) The NASIdentifier field is in the
calls table. Running debug mode radius -x15 shows radius writting "NULL"
to the NASIdentifier field.

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Missing OCX files
From: "Frank Nowling" <frankn@netropolis.net>
Date: Tue, 26 May 1998 09:58:20 -0500

I'm trying to run radadmn on a freshly installed NT server. I have been
getting several messages about missing ocx files. I've successfully found
all of them and put them on the server except for MSRDC32.OCX. Where can I
find this file?

Frank

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 3 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Missing OCX files
From: "Dale E. Reed Jr." <daler@iea-software.com>
Date: Tue, 26 May 1998 09:37:21 -0700

Frank Nowling wrote:
>
> I'm trying to run radadmn on a freshly installed NT server. I have been
> getting several messages about missing ocx files. I've successfully found
> all of them and put them on the server except for MSRDC32.OCX. Where can I
> find this file?

Just run the installation for RadiusNT and it will install the files. Did
you run full setup?

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: NASIdentifier not written to calls tableFrom: "Dale E. Reed Jr." <daler@iea-software.com>Date: Tue, 26 May 1998 09:43:20 -0700

fx2@eon.adcdatel.com wrote:> > I'm running radius 2.2.41 in odbc mode.. NASIdentifier doesn't get written> to the calls table. It does show up in the callsonline table though. (I> think I added NASIdentifier as a field) The NASIdentifier field is in the> calls table. Running debug mode radius -x15 shows radius writting "NULL"> to the NASIdentifier field.

What is the exact -x15 debug output? The "NULL" actually sounds like ausername issue, not a NAS-Identifier. Do you see NAS-Identifier comingfrom the NAS? What about NAS-IP-Addr?

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: UUCP type cutomersFrom: "Lawrence Watkins Work" <lwatkins-work@thepark.net>Date: Tue, 26 May 1998 12:02:03 -0500

Hello all!We have a number of UUCP customers that are currently notdialing into our Portmster3s. We are running RadiusNT2.5 onNT4 SP3 +hotfixes. Was wondering if anyone has done thisusing RadiusNT to authenticate the users. Any informationwould be helpful. Thanks in advanceLawrence Watkins

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: NASIdentifier not written to calls tableFrom: <fx2@eon.adcdatel.com>Date: Tue, 26 May 1998 12:12:47 -0400 (EDT)

SQL Statement: INSERT INTO Calls(CallDate,NASPort,UserName,AcctStatusType,AcctSessionId) VALUES (GetDate(),3,'RJOETKEN',1,'000002E7')

SQL Statement: UPDATE CallsOnline Set UserName='RJOETKEN',AcctStatusType=1, CallDate=GetDate(), FramedAddress=NULL WHERE NASIdentifier='155.226.130.2'and NASPort=3

Actually now that I look at it, it doesn't look like it inserts"nasidentifier" in the calls table. Any idea why?

And another important thing is it's inserting FramedAddress=NULL in theCallsOnline table.

How can I get it to also insert FramedAddress in the Calls table?

Thanks

On Tue, 26 May 1998, Dale E. Reed Jr. wrote:

> fx2@eon.adcdatel.com wrote:> > > > I'm running radius 2.2.41 in odbc mode.. NASIdentifier doesn't get written> > to the calls table. It does show up in the callsonline table though. (I> > think I added NASIdentifier as a field) The NASIdentifier field is in the> > calls table. Running debug mode radius -x15 shows radius writting "NULL"> > to the NASIdentifier field.> > What is the exact -x15 debug output? The "NULL" actually sounds like a> username issue, not a NAS-Identifier. Do you see NAS-Identifier coming> from the NAS? What about NAS-IP-Addr?> > -- > Dale E. Reed Jr. (daler@iea-software.com)> _________________________________________________________________> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs> Internet Solutions for Today | http://www.iea-software.com>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: NASIdentifier not written to calls tableFrom: hostmaster@interaxs.netDate: Tue, 26 May 1998 13:33:39 -0400

Send the debug from one entire logon transaction, including the NAS requestinfo.

Jim

At 12:12 PM 5/26/98 -0400, you wrote:>> SQL Statement: INSERT INTO Calls>(CallDate,NASPort,UserName,AcctStatusType,Acct>SessionId) VALUES (GetDate(),3,'RJOETKEN',1,'000002E7')>>> SQL Statement: UPDATE CallsOnline Set UserName='RJOETKEN',>AcctStatusType=1, Ca>llDate=GetDate(), FramedAddress=NULL WHERE NASIdentifier='155.226.130.2'>and NA>SPort=3>>Actually now that I look at it, it doesn't look like it inserts>"nasidentifier" in the calls table. Any idea why?>>And another important thing is it's inserting FramedAddress=NULL in the>CallsOnline table.>>How can I get it to also insert FramedAddress in the Calls table?>>Thanks>>On Tue, 26 May 1998, Dale E. Reed Jr. wrote:>>> fx2@eon.adcdatel.com wrote:>> > >> > I'm running radius 2.2.41 in odbc mode.. NASIdentifier doesn't getwritten>> > to the calls table. It does show up in the callsonline table though. (I>> > think I added NASIdentifier as a field) The NASIdentifier field is inthe>> > calls table. Running debug mode radius -x15 shows radius writting "NULL">> > to the NASIdentifier field.>> >> What is the exact -x15 debug output? The "NULL" actually sounds like a>> username issue, not a NAS-Identifier. Do you see NAS-Identifier coming>> from the NAS? What about NAS-IP-Addr?>> >> -- >> Dale E. Reed Jr. (daler@iea-software.com)>> _________________________________________________________________>> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs>> Internet Solutions for Today | http://www.iea-software.com>> > ----------------------------hostmaster@interaxs.netInterNet Access Network18 McDaniel StreetDayton, OH 45405-4816Voice: 937-461-3660 Fax:937-228-2773

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: NASIdentifier not written to calls tableFrom: <fx2@eon.adcdatel.com>Date: Tue, 26 May 1998 12:54:04 -0400 (EDT)

###########

radrecv: Request from host 9be28202 code=4, id=3, length=88 NAS-IP-Address = 155.226.130.2 NAS-Port = 1 NAS-Port-Type = Async User-Name = "sstrause" Acct-Status-Type = Start Acct-Authentic = RADIUS User-Service = Framed-User Acct-Session-Id = "000002EF" Framed-Protocol = PPP Acct-Delay-Time = 0

SQL Statement: INSERT INTO Calls(CallDate,NASPort,UserName,AcctStatusType,AcctSessionId) VALUES (GetDate(),1,'sstrause',1,'000002EF')

SQL Statement: UPDATE CallsOnline Set UserName='sstrause',AcctStatusType=1, CallDate=GetDate(), FramedAddress=NULL WHERE NASIdentifier='155.226.130.2' and NASPort=1

Sending Accounting Ack of id 3 to 9be28202 (dialup1.adcsig.com)

Resp Time: 120 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1

###########

On Tue, 26 May 1998 hostmaster@interaxs.net wrote:

> Send the debug from one entire logon transaction, including the NAS request> info.> > Jim> > At 12:12 PM 5/26/98 -0400, you wrote:> >> > SQL Statement: INSERT INTO Calls> >(CallDate,NASPort,UserName,AcctStatusType,Acct> >SessionId) VALUES (GetDate(),3,'RJOETKEN',1,'000002E7')> >> >> > SQL Statement: UPDATE CallsOnline Set UserName='RJOETKEN',> >AcctStatusType=1, Ca> >llDate=GetDate(), FramedAddress=NULL WHERE NASIdentifier='155.226.130.2'> >and NA> >SPort=3> >> >Actually now that I look at it, it doesn't look like it inserts> >"nasidentifier" in the calls table. Any idea why?> >> >And another important thing is it's inserting FramedAddress=NULL in the> >CallsOnline table.> >> >How can I get it to also insert FramedAddress in the Calls table?> >> >Thanks> >> >On Tue, 26 May 1998, Dale E. Reed Jr. wrote:> >> >> fx2@eon.adcdatel.com wrote:> >> > > >> > I'm running radius 2.2.41 in odbc mode.. NASIdentifier doesn't get> written> >> > to the calls table. It does show up in the callsonline table though. (I> >> > think I added NASIdentifier as a field) The NASIdentifier field is in> the> >> > calls table. Running debug mode radius -x15 shows radius writting "NULL"> >> > to the NASIdentifier field.> >> > >> What is the exact -x15 debug output? The "NULL" actually sounds like a> >> username issue, not a NAS-Identifier. Do you see NAS-Identifier coming> >> from the NAS? What about NAS-IP-Addr?> >> > >> -- > >> Dale E. Reed Jr. (daler@iea-software.com)> >> _________________________________________________________________> >> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs> >> Internet Solutions for Today | http://www.iea-software.com> >> > > > ----------------------------> hostmaster@interaxs.net> InterNet Access Network> 18 McDaniel Street> Dayton, OH 45405-4816> Voice: 937-461-3660 Fax:937-228-2773>

..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Problem with ReportsFrom: "Eric Powers" <eric@river-valley.net>Date: Tue, 26 May 1998 13:05:18 -0500