-----Original Message-----
From: Barry Kiesz [mailto:barry@hdc.net]
Sent: Thursday, May 14, 1998 5:24 PM
To: RadiusNT@iea-software.com
Subject: RE: won't work
When you run RadiusNT from a DOS Box with -x15 (radius.exe -x15) What do you
see. Do you see any errors?
Barry
> -----Original Message-----
> From: John Bichao Jr. [mailto:johnb@cascadenet.com]
> Sent: Thursday, May 14, 1998 4:02 PM
> To: 'RadiusNT'
> Subject: won't work
>
>
> I am trying to set up radiusnt. It's not working. Here's some info:
>
> There is a portmaster(24 port) and a NT domain. Radiusnt is installed
> on the PDC which is also the radius server and primary DNS server.
> The portmaster authenticates fine with the user table information but
> if I take out a user entry it disconnects. I set it up according to the
> documentation I believe. I'm under the assumption, which is probably
> wrong, that the portmaster will check the user table first and then if it
> doesn't find the user there will check the radius server. Any help would
> be appreciated.
>
> ###############################################
> John Bichao Jr.
> MIS Manager
> Cascade Systems Inc.
> 300 Brickstone Sq.
> Andover MA 01810-1435
>
> Email: jbichao@cascadenet.com
> Voice: (978) 749-7000 x243 Fax: (978) 749-7099
> ###############################################
>
>
> ----------------------------------------------------------
> RadiusNT Mailing List lists@iea-software.com
>
----------------------------------------------------------
RadiusNT Mailing List lists@iea-software.com