[Emerald Digest]
emerald-digest-request@iea-software.com
Wed, 26 Aug 1998 00:00:05 -0700
Message 1: Re: Third try
from "Alan D. Criado" <ACriado@elink.net>
Message 2:
from "Rick Morgan" <eval2@gtn.net>
Message 3: Overflow
from "Michael M. Green" <mgreen@megsinet.net>
Message 4: RE: Overflow
from "Michael M. Green" <mgreen@megsinet.net>
Message 5: Printing batches of invoices
from " Olivier Astier " <astier@EchoWeb.net>
Message 6: Re: Third try
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 7: Re: Why "sa" is displayed when logging into Emerald using valid username
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 8: Re: Questions with Radius
from "Dale E. Reed Jr." <daler@iea-software.com>
Message 9: Re: Questions with Radius
from "Dusan Janjic" <djanjic@rockbridge.net>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 1 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject: Re: Third try
From: "Alan D. Criado" <ACriado@elink.net>
Date: Tue, 25 Aug 1998 02:56:11 -0400
Hi Richard.
I don't have a Max 4048, but you said "any suggestions would help." (grin)
Double check to see if the NAS-PORT= being sent by your MAX is the same
numbers as was being sent before.
Perhaps the OS updating changed the numbering scheme used by each port, so
that they no longer match the port number you previously had configured in
radius. If so, that would cause the online calls not to work.
Hope it's that easy.
Take care.
Alan D. Criado
At 11:14 PM 8/24/98 -0400, Richard Sensale wrote:
>I have asked this before but gotten no reply from list or IEA support.
>After updating the OS in out Max 4048, all of a sudden online calls does not
>work. The config from the terminal server was saved before the upgrade and
>restored exactly so what oculd be causing this? Any suggestions would help.
>As far as I can tell the accounting and auth settings in the term server are
>fine and the there were no changes made to Emerald.
>
>Richard Sensale
>Network Administrator
>VisitUs Internet, Inc.
>
>at home.
>
..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
| Message 2 |
'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
Subject:
From: "Rick Morgan" <eval2@gtn.net>
Date: Tue, 25 Aug 1998 13:13:51 -0400
This is a multi-part message in MIME format.
------=_NextPart_000_0061_01BDD02A.33E1ECD0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
unsubscribe
------=_NextPart_000_0061_01BDD02A.33E1ECD0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
unsubscribe
------=_NextPart_000_0061_01BDD02A.33E1ECD0--..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 3 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: OverflowFrom: "Michael M. Green" Date: Tue, 25 Aug 1998 18:44:33 -0500Does anyone know how to fix this? I tried to login into emerald and after I put in a password I get an6:Overflow error..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 4 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: RE: OverflowFrom: "Michael M. Green" Date: Tue, 25 Aug 1998 18:56:45 -0500I found the problem. And corrected itThanks.-----Original Message-----From: emerald-request@iea-software.com[mailto:emerald-request@iea-software.com]On Behalf Of Michael M. GreenSent: Tuesday, August 25, 1998 6:45 PMTo: emerald@iea-software.comSubject: OverflowDoes anyone know how to fix this? I tried to login into emerald and after I put in a password I get an6:Overflow error..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 5 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Printing batches of invoicesFrom: " Olivier Astier " Date: Tue, 25 Aug 1998 16:55:04 PDTHi all,I have two problems with printing batches of invoices with emerald 2.2.38.1) The footer doesn't match the header of the invoices : it is the footer of the next invoice. I know this is a know bug with CR5.0 but I have never installed it. Anyway, the report inv50.rpt seems to correct this problem but when I try to open it in Crystal Reports 4.5 I have an error "Acces Denied" whereas I am sure I have the NTFS rights to open it. Any idea? Is there a fixed version of this report for CR 4.5 ?2) In the "batch" tab, I enter the date I created the invoice and click on "e-mail" : everything is ok. Then I click on "print" and it prints ALL the invoices, even those who should have been (and have been) sent by e-mail. How can I print only the invoices for the "postal bill" customers?Thank you for your attention.OliverEchoWeb LLC..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 6 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Third tryFrom: "Dale E. Reed Jr." Date: Tue, 25 Aug 1998 17:09:06 -0700Richard Sensale wrote:> > I have asked this before but gotten no reply from list or IEA support.> After updating the OS in out Max 4048, all of a sudden online calls does not> work. The config from the terminal server was saved before the upgrade and> restored exactly so what oculd be causing this? Any suggestions would help.> As far as I can tell the accounting and auth settings in the term server are> fine and the there were no changes made to Emerald.Run RadiusNT in -x15 debug and see what accounting packets you arereceiving from the NAS. Most likely something isn't right with theaccounting.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 7 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Why "sa" is displayed when logging into Emerald using valid usernameFrom: "Dale E. Reed Jr." Date: Tue, 25 Aug 1998 17:20:41 -0700Josh Hillman wrote:> > Why is "sa" displayed when logging into SQL (Emerald / ISQL, etc.) using a> valid username other than "sa"?Because you have incorrectly setup mixed/trusted security. > I've seen this question asked several times on this list and after wondering> about it for quite a while, finally came across info on it...> > It happens when the following criteria are met:> 1. SQL Server is set up for "Integrated Security" or "Mixed Security".> 2. The user is logged into an NT-managed domain.> 3. The user is an NT administrator on the NT domain.> > Do any of the following require SQL Server's "Integrated Security" to> function correctly/optimally together?:> Emerald 2.1.11 (or later)> RadiusNT 2.5.124 (or later)> ServU FTP 2.3c (or later) using emer_su.dll 4.4.1.1> > OR, is there a way of preventing SQL Server from associating "sa" with an> NT-administrative account (aside from removing that account from the NT> Administrators group) while using Integrated/Mixed security?Yes. This is covered in the SQL Server Adminstrator's Companion. Create two groups on your domain, SQLUsers and SQLAdmins. PutEveryone in SQLUsers except the domain admin. Put the Domain Adminin the SQLAdmins group and no one else. Don't login as the domainadmin normally, also. :)Finally, go into the SQL Security manager, add the SQLAdmins as ansa group, revoke the domain admnstrators as an sa group, and add theSQLUsers as a normal user group.If anyone remembers a long time ago, the instructions to do thiswhere in the original "how to Setup RadiusNT 1.16 with SQL Server"notes. -- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 8 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Questions with RadiusFrom: "Dale E. Reed Jr." Date: Tue, 25 Aug 1998 17:50:15 -0700Dusan Janjic wrote:> > Let me apologize for sending this request to Emerald list rather than> Radius, I am not subscribed to it and see no need to start getting> already full mail box even fuller. I am having problems making Radius> 2.5.124 work. I have loaded the software, ran the sql script. I am doing> this on our backup authentication server. The problem is that it doesn't> authenticate when I run it. I don't see anything happen when I run -x15> mode. Here are the error messages from the log file:> .... > I am not sure how to solve this??Run the rad25_up2.sql script against your Emerald database. It includesthe missings fields noted.-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com..------ ------ ------ ------ ------ ------ ------ ------ ------ ------.| Message 9 |'------ ------ ------ ------ ------ ------ ------ ------ ------ ------'Subject: Re: Questions with RadiusFrom: "Dusan Janjic" Date: Tue, 25 Aug 1998 20:43:44 -0400This is a multi-part message in MIME format.--------------22749828D0504AE5B1A89449Content-Type: text/plain; charset=us-asciiContent-Transfer-Encoding: 7bitDale E. Reed Jr. wrote:> Dusan Janjic wrote:> >> > Let me apologize for sending this request to Emerald list rather than> > Radius, I am not subscribed to it and see no need to start getting> > already full mail box even fuller. I am having problems making Radius> > 2.5.124 work. I have loaded the software, ran the sql script. I am doing> > this on our backup authentication server. The problem is that it doesn't> > authenticate when I run it. I don't see anything happen when I run -x15> > mode. Here are the error messages from the log file:> >> ...> > I am not sure how to solve this??>> Run the rad25_up2.sql script against your Emerald database. It includes> the missings fields noted.>I was sure did, but I will do it again.--------------22749828D0504AE5B1A89449Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"Content-Transfer-Encoding: 7bitContent-Description: Card for Dusan JanjicContent-Disposition: attachment; filename="vcard.vcf"begin: vcardfn: Dusan Janjicn: Janjic;Dusan org: RGVadr: 17 S. Jefferson;;;Lexington;VA;24450;U.S.email;internet: djanjic@rockbridge.nettel;work: 540-463-4451note: http://www.rockbridge.netx-mozilla-cpt: ;0x-mozilla-html: FALSEversion: 2.1end: vcard--------------22749828D0504AE5B1A89449--