Re: On Line Calls
Richard Sensale ( (no email) )
Tue, 2 Jun 1998 17:55:27 -0700
Okay I went in and checked. I don't have a selection for MAX 4048, the
closest is MAX 4000. Also, under server ports. Do I need to set anything
for the IP address? Our MAX dynamically assigns IPs to it's ports. I tried
setting it to 4000 and 48 ports and setting the IP to the base IP for the
term server but I still get no info from emerald on that server.
From: Dale E. Reed Jr. <email@example.com>
To: firstname.lastname@example.org <email@example.com>
Date: Tuesday, June 02, 1998 9:46 AM
Subject: Re: On Line Calls
>Richard Sensale wrote:
>> Does anyone know how to get the on-line calls feature of Emerald working
>> with an Ascend MAX 4048 terminal server?
>You just need to make sure you port the server correctly. Select Max
>ascend for the server and ports to 48 and click re-port. If that is
>all setup, then most likely there is a problem with your trigger.
>Dale E. Reed Jr. (firstname.lastname@example.org)
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com