Re: PM3s and Dual Channel Usage

Andrew Tadros ( (no email) )
Sun, 29 Mar 1998 21:48:19 -0500

Okay, if you are using RADIUS NT, I suspect either the person is doing a
MULTI LINK PPP , or ISDN call, all you will have to do is add a line to the
users RADIUS account. Something that says PORTS = 1 , check the docs to see
if it is port or ports.
-----Original Message-----
From: Scott Lagos <slagos@net1plus.com>
To: RadiusNT@iea-software.com <RadiusNT@iea-software.com>
Date: Sunday, March 29, 1998 8:03 PM
Subject: PM3s and Dual Channel Usage

>We have several PM3 running 3.7.2 and some user are able to connect using
>two channels even though we have concurrency lockout enabled (only one
>login at a time).
>
>When they connect each port is assigned the same IP, so I am assuming that
>only one authentication against RADIUS is occiring.
>
>Is there away to prohibit this type of call - at least to only allow one
>channel? If so what version and what mode should we be running RADIUS in
>to accomplish this.
>
>Thanks
>
>
>
> ----------------------------------------------------------
> RadiusNT Mailing List lists@iea-software.com
>