Thanks!
Tom M.
At 05:43 PM 12/15/97 -0600, you wrote:
>We are using ISPorte's and have found that the init string (on the users
modem) listed below solves the problem...
>
> AT&F1&K0&I0S33=32S15=128S27=64S32=34
>
>Ronnie
>
>On Monday, December 15, 1997 5:08 PM, Network Operations
[SMTP:noc@apc.net] wrote:
>> They cannot use 56K modem drivers. Have them use the Standard 28.8
>> drivers. We had the same problem with our 4004s.
>>
>> At 09:27 AM 12/12/97 -0800, you wrote:
>> >I am using Ascend Max 4004s and 4048s and am having problem
>> >with users with the 56k USR modems. They can connect to me
>> >(of course not at 56k, they connect at 28800) but after a few
>> >minutes they can't transfer any more data. The modem is still
>> >connected but I can't ping them anymore. This happens when they
>> >calls into the 4004 or the 4048. Any ideas of what I should do?
>> >
>> >Thanks
>> >Dan
>> >
>> >
>> >
>> >
>> > ----------------------------------------------------------
>> > NTISP Mailing List listserver@emerald.iea.com
>> >
>> >
>>
>>
>> ----------------------------------------------------------
>> NTISP Mailing List listserver@emerald.iea.com
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>
>