At 07:15 PM 12/15/97 -0500, you wrote:
>That is absolutely not true! The US Robotics Total Control hub supports
>Channelized T1 for 56K X2 applications. You only need the PRI if you intend
>to offer ISDN services.
>
>Mike Davis
>DCS Online
>
>-----Original Message-----
>From: Rick Kunze <rkunze@colusanet.com>
>To: ntisp@emerald.iea.com <ntisp@emerald.iea.com>
>Date: Monday, December 15, 1997 7:06 PM
>Subject: Re: 56K x2 server side modems
>
>
>>No, this is not available. All the X2 gear that I checked into requires
>>PRI. I found none that supports CT1. (Therefore I bought a PM3!)
>>
>>Rk
>>
>>At 06:49 PM 12/15/97 -0500, you wrote:
>>>We are running a DigiPort box with individual modems connected to an
>>>Adtran 600 Channel Bank to access lines on a T1. We have some customers
>>>that want to upgrade from 33.6 to 56K x2 modems. Does anyone know if
>>>the server side modems for x2 come as individual units? Most of the
>>>vendors I've checked out sell modem pools that you plug a T1 into. I
>>>need something to plug into one channel of a T1.
>>>
>>>Ideas and suggestions appreciated.
>>>
>>>George G. Stossel, President Phone:
>>>419.352.3568
>>>DACOR Computer Systems FAX: 419.353.0149
>>>519 W. Wooster Street Sales: 800.447.5333
>>>Bowling Green, OH 43402-2763 03 USA Email:
>>>stossel@dacor.com
>>> WWW: http://www.dacor.com/
>>>
>>>
>>> ----------------------------------------------------------
>>> NTISP Mailing List listserver@emerald.iea.com
>>>
>>>
>>
>> ----------------------------------------------------------
>> NTISP Mailing List listserver@emerald.iea.com
>>
>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>
>