- Danny
----------
> From: Mitch Wagers <mwagers@ocsnet.net>
> To: ntisp@emerald.iea.com
> Subject: Re: RRAS won't stop when I shutdown server ?
> Date: Wednesday, December 10, 1997 8:30 PM
>
> Well, it's probably the same as suggested for most Access
> Servers...disconnect all incoming lines (i.e. disconnect the user) before
> rebooting the machine. If they see a port open (Com port in your case)
they
> usually mark it as unusable for the time being...
>
>
> At 08:02 PM 12/10/97 -0000, you wrote:
> >Hi.
> >
> >Everytime I shutdown my NT server 4 SP3, RRAS doesn't seem to stop since
> >all the modems are still lit. The dial-in lines still await calls and
the
> >dial-out line is still connected ( based on lit LED's ).
> >
> >Then when I start NT again, all COM ports are not functioning accdng to
the
> >Event Logs. When I choose Shutdown / Restart, the COM ports work again.
> >
> >What could be wrong and what would be the solution ?
> >
> >I've installed the Out of Buffer fix for RRAS.
> >
> >Danny Sinang
> >President, Uplink Technologies, Inc.
> >danny@uplink.com.ph
> >http://www.uplink.com.ph/danny/
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
> >
> >
>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com