Tom
-----Original Message-----
From: Dale E. Reed Jr. [mailto:daler@iea.com]
Sent: Wednesday, January 21, 1998 2:48 AM
To: emerald@emerald.iea.com
Cc: RadiusNT@iea-software.com
Subject: Re: Cannot Limit Calls Based on DNIS # and Multi POPs
Rudy Komsic wrote:
>
> sorry for repost... but I did not see any reply to this.
It currently can not be done. We'll look into the possibility of
enhancing
server port access to handle DNIS and NAS-Port-Type as well.
> -----Original Message-----
> From: Rudy Komsic <rudyk@cyberglobe.net>
> To: RadiusNT@iea-software.com <RadiusNT@iea-software.com>
> Date: January 8, 1998 1:29 AM
> Subject: Bug: Cannot Limit Calls Based on DNIS # and Multi POPs
>
> >Hello,
> >
> >Just to give out our basic Layout on how we are currently using our
new
> >Chassis system to limit Theft of Service, we are configured with ISDN
PRI
> >Connections (47 Lines per chassis) and we have 3 Phone numbers for
our
> >clients to call in on. Line 1 is for up to 33.6k Only, Line 2 is for
33.6k
> >and X2, and Line 3 is for 33.6k, X2, and ISDN. Our USR Total Control
> >Chassis have a feature that allows us to setup DNIS Pre
Initialization
> >before pickup so that we can limit the speed for our clients.
> >
> >The Problem is how do I set the Radius Attribute NAS-Port-DNIS for a
> >specific group login to the DNIS number the client is ONLY to dial.
For
> >Example I tried the following to see if it would limit login to the
> >specified DNIS #:
> >
> >Framed-Protocol: PPP
> >Framed-Address: 255.255.255.254
> >Session-Timeout: 28800
> >Idle-Timeout: 1200
> >NAS-Port-DNIS: 0001 (Line #1 for 33.6k only)
> >
> >Now, if I called on line #2, the NAS returns the Info to the RadiusNT
> >software, is has NAS-Port-DNIS as 0002 but I discovered that RadiusNT
has
> NO
> >support to check to see if NAS-Port-DNIS is the one the client is
allowed
> to
> >use. Can you please tell me how to do this feature? If this feature
is
> not
> >available, could you please add this feature in ASAP so that we can
> simplify
> >with Multipurpose Chassis?
> >
> >Also, can you add support for Multiple DNIS numbers as well for
MultiPOPs.
> >
> >Thank you for your prompt reply.
> >
> >PS: BTW, there may be a bug with USR's Total Control Modem Code
5.6.7 and
> >Netserver Code 3.6.28 with RadiusNT. When we establish a connection
via a
> >Radius account, it works but when we try to login a user via the NT
User
> >Manager account, it fails. This currently works with the older code
but
> the
> >newer code fails.
> >
> >----
> >Rudy Komsic
> >President - Cyberglobe Communications Inc.
> >4996 Place de la Savane, Montreal, Quebec, H4P 1Z6, Canada
> >E-Mail: rudyk@cyberglobe.net Phone: (514)342-3883
Fax:(514)342-5139
> >
> >
>
> ----------------------------------------------------------
> Emerald Mailing List listserver@emerald.iea.com
-- Dale E. Reed Jr. (daler@iea.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com---------------------------------------------------------- Emerald Mailing List listserver@emerald.iea.com