Re: RadiusNT .60, Access & No Logins
Dale E. Reed Jr. ( (no email) )
Wed, 09 Jul 1997 19:11:16 -0700
Glen Harvy wrote:
>
> The next problem is that my NAS doesn't seem to be returning the time
> on-line. Here's a copy of the text in my accounting directory:-
>
> Thu Jul 10 08:46:26 1997
> Acct-Session-Id = "9000001"
> User-Name = "terry"
> NAS-IP-Address = 203.58.25.100
> NAS-Port = 3
> Acct-Status-Type = Start
> User-Service-Type = Framed-User
> Framed-Protocol = PPP
> Acct-Delay-Time = 0
>
> Thu Jul 10 08:55:38 1997
> Acct-Session-Id = "9000001"
> NAS-IP-Address = 203.58.25.100
> NAS-Port = 3
> Acct-Status-Type = Stop
> Acct-Session-Time = 0
> User-Name = "terry"
> Acct-Input-Octets = 24327
> Acct-Output-Octets = 238414
> Acct-Terminate-Cause = 2
> Acct-Delay-Time = 0
>
> Notice that the Acct-Session-Time reports as 0.
>
> Once again, where do I go from here :-)
You'll have to take this one up with your NAS vendor. If the NAS
is sending 0 to RadiusNT, there isn't much we can do about it.
-- Dale E. Reed Jr. (daler@iea.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.emerald.iea.com