I'm trying to set-up a second RadiusNT server. Right now I have one
set-up and its running smooth. but I can't get the second to authenticate.
here's what I did. I installed the second server and modify the files as
per the instructions, I can test it with radlogin and it works now if I
turn off my primary to force my NAS to look at my second it finds the user
and I get the normal -x15 debug screen:
------------------------------------------------------------------
radrecv: Request from host aaaaaaaa code=1, id=243, length=62
User-Name = "test"
Password = "$\203,\013\316\365\230\275j\345\305\343~qG\342"
NAS-IP-Address = 111.111.111.111
NAS-Port = 4
NAS-Port-Type = Async
rad_authenticate()
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is test
decrypted pwd is test
Sending Ack of id 243 to aaaaaaaa (111.111.111.111)
User-Service = Framed-User
Response Time: 200
----------------------------------------------------------------------------
---------
What it will do is display this 9 times before the computer that I'm using
to dial in will ask me again to put my user name and password. Also while
I was testing it a few users try to connect and the same thing happend. My
guest it seems that I have to communications from radius to my NAS. I even
copy my client & user file from my primary and did the same. Any ideas or
suggestion? Thanks.
BTW I'm running:
winnt4
radiusNT 1.16.60
using a text file users. file
and a PM3