Re: mmmodems

Mitch Wagers ( (no email) )
Thu, 26 Jun 1997 08:33:05 -0500

My experience is make sure the Pm2e is capable of talking to a 56K modem.
I had to do an IOS change on our cisco boxes to make it work, but in the
end it worked just fine. Also, make sure you have the correct command
scripts and serial speeds set on the Pm2e. That's really the only advice I
can give since I have never worked with any Portmaster equipment, but I
hope this helps...

----------
From: peter kahn <peter@galaxi.net>
To: RadiusNT@emerald.iea.com
Subject: mmmodems
Date: Wednesday, June 25, 1997 10:58 PM

We are presently using 28.8 modems for our dialup users witha Portmaster 2e
and would like to upgrade to 56k can anyone advise your experience and what
is the best way to do so. If possible advise equipment requirements. Any
response with regards to rockwell to us robotics

----------------------------------------------------------
RadiusNT Mailing List listserver@emerald.iea.com
----------