>----------
>From: Dave Helton[SMTP:dave@csx.net]
>Sent: Tuesday, June 17, 1997 2:43 AM
>To: RadiusNT@emerald.iea.com
>Subject: Re: Vendor Specific Attributes
>
>Hi Jim,
>
> I have a cisco also. Using .60 version of RadiusNT
>Mine did not work right out of the box, however...
>I configured the cisco for radius authentication and
>accounting. Entered the secret, and set dialin authentication
>to pap, NOT CHAP! I used UltraEdit to edit the users file
>because some of the other editors I used were not as clean
>with tabs and spaces... very important when editing the
>user file.
>
> I did not have to change the dictionary though.
>the one that came with RadiusNT worked fine. I downloaded
>the Access Upsizing Tool from MS and used it to upload the
>Access database to our SQL server. This installed the same
>dictionary that the flat files use. My system now does
>auth/acct'g on the SQL server. We use Access for updates and
>reporting. All works fine.
>
> Nothing special about using a cisco to talk to RadiusNT.
>Below is my config for our 2511's I've edited out anything
>specific to our domain.
>
> Hope this helps.
>
>--Dave
>
> ------------------------------------------------------
>
>Current configuration:
>!
>version 11.1
>service slave-log
>service linenumber
>service udp-small-servers
>service tcp-small-servers
>!
>hostname myhost.ourdomain.net
>!
>aaa new-model
>aaa authentication local-override
>aaa authentication login dialin local
>aaa authentication login dialups radius
>aaa authentication login admins local
>aaa authentication ppp dialups radius
>aaa authentication ppp admins local
>aaa authorization network radius if-authenticated none
>aaa accounting network start-stop radius
>enable secret 5 xxxxxxxxxxxxxxx
>enable password xxxxxxxx
>
> ~
> ~
>line 1
> location dialup1
> access-class 99 in
> access-class 99 out
> no exec
> exec-timeout 0 0
> autoselect during-login
> autoselect ppp
> absolute-timeout 360
> session-limit 1
> login authentication dialups
> modem Dialin
> modem autoconfigure hayes_v34
> stopbits 1
> rxspeed 115200
> txspeed 115200
> flowcontrol hardware
>
> ~
> ~
>!
>interface Async1
> description dialup1
> ip unnumbered Ethernet0
> ip access-group 99 in
> ip access-group 99 out
> ip accounting access-violations
> ip tcp header-compression passive
> encapsulation ppp
> bandwidth 115200
> async default routing
> async dynamic address
> async mode dedicated
> peer default ip address xxx.xxx.xxx.xxx
> dialer-group 1
> no cdp enable
> ppp authentication pap callin dialups
>!
>
>
>
>###################################################
>Dave Helton System Admin CSX.NET
>Circumspect Corporation dave@csx.net
>902 East River Drive Davenport, IA 52803
>Business: 319-323-6313 Fax: 319-323-3415
>CSX.net Home Page http://www.csx.net
>###################################################
>
> ----------------------------------------------------------
> RadiusNT Mailing List listserver@emerald.iea.com
>
>