Steelhead (final) & IEA RadiusNT 1.16.60

Eric Nguyen ( e.nguyen@citybv.almac.co.uk )
Mon, 16 Jun 1997 15:25:07 +0100

Are RadiusNT 1.16.60 and Steelhead (final) compatible ?

I have tried to get it to work, but pretty unsuccessfully so far:

Config NT4 server SP3 + Steelhead + RadiusNT1.16.60

RAS modem with security and accounting set to Radius, Option "Require
encrypted authentication"

'RADLOGIN test test' works fine with user file

test Password = "test"
User-Service = "Framed-User",
Framed-Protocol = "PPP"

If I try to dial-in from another modem into the server, it does not work
and rejects me.
Can anybody help ?

Below the answer from the radius server:

D:\radius>radius -x15

RadiusNT 1.16.60 2/7/97 Copyright (c) 1996 IEA Software, Inc.
All Rights Reserved, Worldwide

Some portions Copyright (c) 1992 Livingston Enterprises, Inc.
and Copyright (c) 1995 Ascend Communications, Inc.

0) Mode: 0
1) EncryptPasswords: 0
2) IgnoreCase: 0
3) ReqAcctAuth: 0
4) Options: 0
5) Debug: 11
6) ODBCDatasource: Radius
7) DataDirectory: d:\radius\
8) AcctDirectory: d:\radius\acct\
9) UsersFile: users
10) Username:
11) Password:
12) AuthPort: 1645
13) AcctPort: 1646

Param: Debug Level: 15
Initializing Winsock...
Client:r1.search-net.net:192.168.1.23:xxxxx

Loading users...
User:test
User:DEFAULT
2 users loaded!

************************** radlogin test test
************************************ OK
Radius NT is ready to receive requests!
radrecv: Request from host c0a80117 code=1, id=1, length=0
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
User-Name = "test"
Password = "\027_<\026\031{\333\237J\271\005\242b\307|\341"
rad_authenticate()
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is test
decrypted pwd is test
Sending Ack of id 1 to c0a80117 (r1.search-net.net)
User-Service = Framed-User
Framed-Protocol = PPP
*********************** From external modem
**********************************OK
Response Time: 310
radrecv: Request from host c0a80117 code=1, id=3, length=74
User-Name = "test"
CHAP-Challenge = "5\304\243\023\014\235#\247 *\301n`z\274\001"
Challenge-Response =
"\001\022\224\310k`\247\034U\370'\227\217\253\271h\235"
Ascend-MPP-Idle-Percent = 1397047634
rad_authenticate()
Checking user record PW_PASSWORD type
authChapPwd
Sending Reject of id 3 to c0a80117 (r1.search-net.net)

Response Time: 220

---Eric NGUYEN.                                          I.T. Manager.                  Searchnet Associates Ltd.

Tel: +44 (0) 131 466 7170Email: mailto:e.nguyen@search-net.netwww: http://www.eece.napier.ac.uk/~eric_nICQ: UIN#: 1155629