RE: NT Install Question.

ronb@SYSYGY.com.au
Fri, 30 May 1997 14:10:01 +1000

Changing the domain name is fine. Mind you, you're only changing the
display name. The SID remains the same.
(Note : after changing the domain name of the PDC or BDC, you'll have to
do the same on all of your clients also)

Cheers,
Ron.

> -----Original Message-----
> From: Matthew Andersen [SMTP:mander@loginet.com]
> Sent: Friday, May 30, 1997 9:15 AM
> To: 'ntisp@emerald.iea.com'; Ron Bertino
> Subject: RE: RE: RE: RE: NT Install Question.
>
> Okay so this isn't possible, what about changing the domain name for a
> BDC? It seems that there has to be a way to do this or MS didn't
> think very much when they implemeted this.
> Thanks,
> Matthew
>
> ----------
> From: ronb@SYSYGY.com.au
> Sent: 5/29/97 3:45:36 PM
> To: ntisp@emerald.iea.com
> CC:
> Subject: RE: RE: RE: NT Install Question.
>
> Unfortunately not.
>
> Cheers,
> Ron.
>
> > -----Original Message-----
> > From: Matthew Andersen [SMTP:mander@loginet.com]
> > Sent: Friday, May 30, 1997 8:34 AM
> > To: 'ntisp@emerald.iea.com'
> > Subject: RE: RE: NT Install Question.
> >
> > This isn't possible. The server is about 2000 miles away. And
> > bringing the other machine too it is not a possibility. So there is
> > no way to do this?
> > Thanks,
> > Matthew
> >
> > ----------
> > From: ronb@SYSYGY.com.au
> > Sent: 5/29/97 3:23:41 PM
> > To: ntisp@emerald.iea.com
> > CC:
> > Subject: RE: NT Install Question.
> >
> > The BDC must be connected to the PDC at the time of its
> > installation.
> > Once it's configured as a BDC, then you can move it away, and get it
> > to
> > act over a RAS link.
> >
> > Cheers,
> > Ron.
> >
> >
> > > -----Original Message-----
> > > From: Matthew Andersen [SMTP:mander@loginet.com]
> > > Sent: Friday, May 30, 1997 7:04 AM
> > > To: 'ntisp@emerald.iea.com'
> > > Subject: NT Install Question.
> > >
> > > I am trying to setup a BDC over a RAS link, but when I install NT
> it
> > > won't give me the chance to dial in and get authenticated by the
> > PDC.
> > > Anyone know how to set this up?
> > > Thanks,
> > > Matthew
> > > mander@loginet.com
> > >
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
> >
> >
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>
>