At 10:18 AM 4/25/97 -0400, you wrote:
>I thought Radius was implemented in Cisco IOS 11.1
>I might be wrong, but I am running a cisco 2511
>with IOS 11.0(10) and do not believe that I have
> radius support
> ----
>From: Mitch Wagers <wizard@telcentral.net>
>To: RadiusNT@emerald.iea.com
>Date: Friday, April 25, 1997 9:31 AM
>Subject: Re: Cisco 2509 and Radius
>
>>Follow your Access Server Configuration Guide that came
>with your Cisco
>>2509. You will have to be running 10.1(7), or later, I
>believe to even use
>>Radius as an authentication server. If you don't have
>that guide, then you
>>need to call Cisco and get one. If you bought it new and
>still don't have
>>one, then you get it free, if not it costs you. If you
>don'thave 10.2 IOS
>>on the Cisco, then you will have to get it upgraded! It
>could be 10.3, I'm
>>not sure...check on Cisco's site for the rest of the
>information :)
>>
>>
>>
>>
>> ----------------------------------------------------------
>
>> RadiusNT Mailing List listserver@emerald.iea.com
>
>>
>
>
> ----------------------------------------------------------
> RadiusNT Mailing List listserver@emerald.iea.com
>
>