> I hate to beat this issue to death, but it's still not working. Any other thoughts?
Ok. I just went into Radadmn and changed the accounting
directory to c:\radius\test. When I ran RadiusNT, it gave
me:
Radius NT is ready to receive requests!
radrecv: Request from host 7f000001 code=4, id=1, length=0
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
User-Name = "daler"
Acct-Session-Id = "43411"
Acct-Status-Type = Start
LOG: Acct: Couldn't open file c:\radius\acct\test/127.0.0.1/detail
I stopped radiusnt, did a "md c:\radius\acct\test" and
then restarted it (although the restart wasn't needed,
I just used that window to create the directory).
Next time around:
Radius NT is ready to receive requests!
radrecv: Request from host 7f000001 code=4, id=1, length=0
NAS-IP-Address = 127.0.0.1
NAS-Port = 0
User-Name = "daler"
Acct-Session-Id = "43433"
Acct-Status-Type = Start
Sending Accounting Ack of id 1 to 7f000001 (127.0.0.1)
Response Time: 80
It DID create the c:\radius\acct\test\127.0.0.1 directory
and create the detail file inside of it.
I have no options enabled, text mode. Current dir was
c:\radius and accounting was c:\radius\acct\test.
Only "Radius -x15" was used on the command line each time.
Dale