The following is the exact debug info I get every time. If you notice, it
will log a user on but gives the error Bad Authenticator and will not start
accounting. When I set up my machine to use USR's Radius on a technician's
machine, they say it works correctly. I have tried Livingstons radius,
Radius NT (Which I need to use) and am stuck. If you take a look at the
info below can you make any guesses? The secret is set correct and the
clients file is cool.
Param: Debug Level: 15
Initializing Winsock...
Client:206.185.22.10:206.185.22.10:XXXXXX
Loading users...
User:kenda
1 user loaded!
Radius NT is ready to receive requests!
radrecv: Request from host ceb9160a code=1, id=10, length=69
User-Name = "kenda"
Password = "\271\266&\303\315\021y\351\020\222D"
NAS-IP-Address = 206.185.22.10
NAS-Port = 1
User-Service = Framed-User
Framed-Protocol = PPP
rad_authenticate()
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is XXXXXX
decrypted pwd is XXXXXX
Sending Ack of id 10 to ceb9160a (206.185.22.10)
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 255.255.255.254
Framed-Netmask = 255.255.255.255
Framed-Routing = None
Framed-Compression = Van-Jacobsen-TCP-IP
Framed-MTU = 1500
Response Time: 22516
radrecv: Request from host ceb9160a code=1, id=10, length=69
User-Name = "kenda"
Password = "\271\266&\303\315\021y\351\020\222D"
NAS-IP-Address = 206.185.22.10
NAS-Port = 1
User-Service = Framed-User
Framed-Protocol = PPP
rad_authenticate()
Checking user record PW_PASSWORD type
authPapPwd
chkPwd->strvalue is XXXXXX
decrypted pwd is XXXXXX
Sending Ack of id 11 to ceb9160a (206.185.22.10)
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 255.255.255.254
Framed-Netmask = 255.255.255.255
Framed-Routing = None
Framed-Compression = Van-Jacobsen-TCP-IP
Framed-MTU = 1500
radrecv: Request from host ceb9160a code=4, id=12, length=85
Acct-Session-Id = "01000001"
User-Name = "kenda"
NAS-IP-Address = 206.185.22.10
NAS-Port = 1
Acct-Status-Type = Start
Acct-Authentic = RADIUS
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 206.185.22.102
Acct-Delay-Time = 0
LOG: Bad authenticator: from 206.185.22.10 - ID: 12
Response Time: 6610
radrecv: Request from host ceb9160a code=4, id=13, length=91
Acct-Session-Id = "01000001"
User-Name = "kenda"
NAS-IP-Address = 206.185.22.10
NAS-Port = 1
Acct-Status-Type = Stop
Acct-Session-Time = 40
Acct-Authentic = RADIUS
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 206.185.22.102
Acct-Delay-Time = 0
LOG: Bad authenticator: from 206.185.22.10 - ID: 13