RE: [RadiusNT] DNIS data collection with PM3 and AS5200

New Message Reply Date view Thread view Subject view Author view
Serkan SUBAřI (ssubasi@turk.net)
Fri, 12 Jan 2001 13:19:41 +0200



From: Serkan SUBAřI <ssubasi@turk.net>
Subject: RE: [RadiusNT] DNIS data collection with PM3 and AS5200
Date: Fri, 12 Jan 2001 13:19:41 +0200
Message-ID: <NCBBJPHBIKPGBDLBFMOJOEAPEMAA.ssubasi@turk.net>

as shown in your radius request logs NASPortDNIS attribute does not send
by your NAS
maybe your telco does not send, or your nas configuration is missing for
this operation

Serkan SUBASI

> -----Original Message-----
> From: radiusnt-request@iea-software.com
> [mailto:radiusnt-request@iea-software.com]On Behalf Of Greg White
> Sent: 12 Ocak 2001 Cuma 01:37
> To: 'radiusnt@iea-software.com'
> Subject: RE: [RadiusNT] DNIS data collection with PM3 and AS5200
>
>
> For clarity's sake, I am including a select snippet from our debug.
>
> Thank you,
>
> Greg White
> Network Administrator
> BCT Online
>
>
> D:\radius>radius -x15
>
> -- unnecessary debug purposely removed --
>
> Param: Debug Level: 15
> Unlimited MBR License
> SQL Statement: Select Name, RadAttributeID, Type, RadVendorID,
> RadVendorType
> Fro
> m RadAttributes Order By RadVendorID ASC, RadAttributeID DESC,
> RadVendorType
> DES
> C
> SQL Statement: SELECT ra.Name, rv.Name, rv.Value, rv.RadVendorID,
> rv.RadVendorTy
> pe FROM RadValues rv, RadAttributes ra WHERE rv.RadAttributeID =
> ra.RadAttribute
> ID AND rv.RadVendorType = ra.RadVendorType AND rv.RadVendorID =
> ra.RadVendorID
> 161 Dictionary Attributes Loaded...
> SQL Statement: Select ServerID, Server, IPAddress, Secret From Servers
> 6 Clients Loaded
> Calls Column 0 (3): 'AcctTerminateCause'
> Calls Column 1 (10): 'AcctInputOctets'
> Calls Column 2 (3): 'AcctStatusType'
> Calls Column 3 (32): 'UserName'
> Calls Column 4 (10): 'AcctSessionTime'
> Calls Column 5 (10): 'AcctSessionID'
> Calls Column 6 (10): 'NASPort'
> Calls Column 7 (12): 'NASPortDNIS'
> Calls Column 8 (16): 'FramedAddress'
> Calls Column 9 (10): 'AcctDelayTime'
> Calls Column 10 (16): 'NASIdentifier'
> Calls Column 11 (16): 'CallDate'
> Calls Column 12 (10): 'AcctOutputOctets'
> 13 Calls Columns Loaded
> RadLogs Column 0 (16): 'CallerID'
> RadLogs Column 1 (10): 'RadLogMsgID'
> RadLogs Column 2 (32): 'Username'
> RadLogs Column 3 (10): 'NASPort'
> RadLogs Column 4 (16): 'LogDate'
> RadLogs Column 5 (16): 'NasIdentifier'
> RadLogs Column 6 (50): 'Data'
> 7 RadLogs Columns Loaded
> Professional features enabled.
> SQL Statement: {CALL RadAtCache(NULL)}
> ADSL: Framed-Protocol = 1 (1)
> ADSL: User-Service = 2 (2)
> Basic: User-Service = 2 (2)
> Basic: Framed-Protocol = 1 (1)
> Basic: Idle-Timeout = 3600 (3600)
> Dedicated v.90: User-Service = 2 (2)
> Dedicated v.90: Framed-Protocol = 1 (1)
> ISDN: User-Service = 2 (2)
> ISDN: Framed-Protocol = 1 (1)
> PPP: User-Service = 2 (2)
> PPP: Framed-Protocol = 1 (1)
> PPP: Idle-Timeout = 3600 (3600)
> Premium: User-Service = 2 (2)
> Premium: Framed-Protocol = 1 (1)
> Premium: Idle-Timeout = 3600 (3600)
> Standard: User-Service = 2 (2)
> Standard: Framed-Protocol = 1 (1)
> Standard: Idle-Timeout = 3600 (3600)
>
>
> -- unnecessary debug purposely removed --
>
> -- Here is a complete auth and call start --
>
> radrecv: Request from host c7027b1e (bc_cas1) code=1, id=246, length=63
> NAS-Identifier = 199.2.123.30
> NAS-Port = 40
> NAS-Port-Type = Async
> User-Name = "sarig"
> Password = "\336b|\233\265\310\356\230\253\336C\364p\263\264\233"
> Checking for duplicate logins.
> Sending Ack of id 246 to c7027b1e (bc_cas1)
> User-Service = Framed-User
> Framed-Protocol = PPP
> Idle-Timeout = 3600
> Class = "IEAS1\0032872\0012"
> Resp Time: 500 Auth: 1/0 -> 1 Acct: 0/0/0 -> 0
>
> radrecv: Request from host c7027b1e (bc_cas1) code=4, id=247, length=99
> NAS-Identifier = 199.2.123.30
> NAS-Port = 40
> NAS-Port-Type = Async
> User-Name = "sarig"
> Acct-Status-Type = Start
> Class = "IEAS1\0032872\0012"
> Acct-Authentic = RADIUS
> User-Service = Framed-User
> Acct-Session-Id = "00002286"
> Framed-Protocol = PPP
> Acct-Delay-Time = 0
> Sending Accounting Ack of id 247 to c7027b1e (bc_cas1)
> Resp Time: 100 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1
>
> radrecv: Request from host c7027b1e (bc_cas1) code=4, id=248, length=105
> NAS-Identifier = 199.2.123.30
> NAS-Port = 40
> NAS-Port-Type = Async
> User-Name = "sarig"
> Acct-Status-Type = 3
> Class = "IEAS1\0032872\0012"
> Acct-Authentic = RADIUS
> User-Service = Framed-User
> Acct-Session-Id = "00002286"
> Framed-Protocol = PPP
> Framed-Address = 199.2.123.244
> Acct-Delay-Time = 0
> Sending Accounting Ack of id 248 to c7027b1e (bc_cas1)
> Resp Time: 100 Auth: 1/0 -> 1 Acct: 2/0/0 -> 2
>
> -- End start record --
>
>
> -- Call stop record --
>
> radrecv: Request from host c7027b1e (bc_cas1) code=4, id=3, length=144
> NAS-Identifier = 199.2.123.30
> NAS-Port = 9
> NAS-Port-Type = Async
> User-Name = "basspro"
> Acct-Status-Type = Stop
> Class = "IEAS1\00415872\0012"
> Acct-Authentic = RADIUS
> User-Service = Framed-User
> Acct-Session-Id = "00002288"
> Framed-Protocol = PPP
> Framed-Address = 199.2.123.212
> Acct-Terminate-Cause = User-Request
> Acct-Input-Octets = 44717
> Acct-Output-Octets = 63392
> Acct-Input-Packets = 310
> Acct-Output-Packets = 248
> Acct-Session-Time = 134
> Acct-Delay-Time = 0
> Sending Accounting Ack of id 3 to c7027b1e (bc_cas1)
> Resp Time: 0 Auth: 5/0 -> 5 Acct: 15/0/0 -> 15
>
> -- End Stop record --
>
>
>
> -----Original Message-----
> From: Serkan SUBASI
> To: radiusnt@iea-software.com
> Sent: 1/11/01 1:07 PM
> Subject: RE: [RadiusNT] DNIS data collection with PM3 and AS5200
>
> do you see NasportDNIS attribute when running Radius -x15 debug mode
>
> Serkan Subasi
>
> > -----Original Message-----
> > From: radiusnt-request@iea-software.com
> [mailto:radiusnt-request@iea-software.com]On Behalf Of Greg White
> > Sent: Thursday, January 11, 2001 10:30 PM
> > To: 'radiusnt@iea-software.com'
> > Subject: [RadiusNT] DNIS data collection with PM3 and AS5200
> >
> >
> > Hello,
> >
> > We are in the process of setting up an 800 number for roaming access.
> We
> > will be charging for use of this number by the minute, and the 800
> number
> > will simply point to our existing modem pool. So, we want to collect
> DNIS
> > info in our calls table for tracking and billing purposes. I have
> added the
> > column NASPortDNIS of type varchar(12) to the Calls table and
> restarted
> > RadiusNT in debug mode. The debug output indicates that it is sees
> the new
> > column. However, when calls come in and Radius inserts call records
> into
> > the Calls table, it isn't even attempting to insert anything in the
> > NASPortDNIS column.
> >
> > Is this a RadiusNT issue, or is it simply ignoring this column because
> it
> > isn't receiving DNIS information from the NAS?
> >
> > We are running RadiusNT 3.0.147. We have a mix of terminal servers.
> Two
> > are Cisco AS5200s running IOS 11.3(10)T. The third is a PM3. All of
> the
> > terminal servers are served by channelized T1 circuits. I haven't
> done
> > anything to specifically tell the terminal servers to forward DNIS
> > information. Can anyone give some guidance in this area? I know that
> the
> > AS5200 is receiving the DNIS info because the digits appear in the
> debug
> > output. I don't know about the PM3.
> >
> > Any help would be greatly appreciated.
> >
> >
> > Thank you,
> >
> > Greg White
> > Network Administrator
> > BCT Online
> >
> >
> > ------------
> >
> > This is a user supported list. If you require assistance from IEA
> Software's
> > Support Engineers, please check out our Support resources at
> > http://www.iea-software.com/support.
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> ------------
>
> This is a user supported list. If you require assistance from IEA
> Software's
> Support Engineers, please check out our Support resources at
> http://www.iea-software.com/support.
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
> ------------
>
> This is a user supported list. If you require assistance from IEA
> Software's
> Support Engineers, please check out our Support resources at
> http://www.iea-software.com/support.
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart



New Message Reply Date view Thread view Subject view Author view
This archive was generated on Fri Jan 12 2001 - 03:05:10 Pacific Standard Time