----- Original Message -----
From: "Nezar Ahmed" <nezar@shahd.com>
To: <>
Sent: Monday, July 24, 2000 8:02 PM
Subject: [RadiusNT] RadCheckOnline
> Does RadCheckOnline procedure uses two parameters now instead of one ? I
> think it uses the username and accountid as the two parameters. What is
the
> accountid used for ? I had to modify the stored procedure from accepting
> just one parameter to two but I have no idea what is it used for.
> Thanks,
> Nezar
>
> ----- Original Message -----
> From: "Christian Schmit" <cschmit@vo.lu>
> To: <radiusnt@iea-software.com>
> Sent: Monday, July 24, 2000 6:18 PM
> Subject: [RadiusNT] radius authentication problem after upgrade to 12.1(3)
>
>
> >
> > I just upgraded one AS5300 from 12.04XJ(4) IP plus
> > to 12.1(3) IP Plus. After this upgrade dial-in users
> > could no longer authenticate to login via radius.
> >
> > I checked my radiusnt debug files and saw
> > that the radius server was receiving the
> > login request from the AS5300 and also
> > acknowledged the login request. However the AS
> > did not authenticate the user.
> >
> > I then configured my radius server to let in
> > every user regardless of which password or username
> > is entered and this way it works. As you can
> > imagine this is only a temporary solution.
> >
> > The same radius server worked fine with 12.04XJ(4)
> > and is still working fine with a group of PM3's.
> > No changes were made to the radius server.
> > I use radiusnt 2.5(212) with SQL 7 server.
> >
> > My radius config on the NAS:
> > -----------------------------
> >
> > aaa new-model
> > aaa authentication login SECURE group radius enable
> > aaa authentication login CONSOLE local
> > aaa authentication login AUX group radius enable
> > aaa authentication login VTY line
> > aaa authentication ppp default if-needed group radius local
> > aaa authorization exec default group radius if-authenticated
> > aaa authorization network default group radius if-authenticated
> > aaa accounting exec default start-stop group radius
> > aaa accounting network default start-stop group radius
> > .
> > .
> > .
> > radius-server host a.b.c.d auth-port 1645 acct-port 1646
> >
> >
> > thanks,
> > Christian
> >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart