-----Original Message-----
From: Darren Clissold <sysadmin@datafast.net.au>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Thursday, July 20, 2000 10:06 AM
Subject: Re: [RadiusNT] Auth any user
>Still doesn't work,
>
> DEFAULT Password = "ANY"
> User-Service = Framed-User
> (It should read "ANY", i.e,. use the password ANY (in caps, no
>quotes) and
> any password will be accepted for the username.)
>
>
>Resp Time: 50 Auth: 0/15 -> 15 Acct: 0/0/0 -> 0
>radrecv: Request from host cb2bfa05 code=1, id=145, length=63
> User-Name = "darren"
> Password = "B"\243*\012\207VQ"
> NAS-IP-Address = 203.43.250.5
> NAS-Port = 0
> NAS-Port-Type = Virtual
> User-Service = Login-User
>rad_auth(): user_find(darren) error = Neither User Nor Default Name
>Authenticate: from 203.43.250.5 - Neither User Nor Default Name: darren
>
>Sending Reject of id 145 to cb2bfa05 (203.43.250.5)
>
>And what's this WUPG ?
>
>-----Original Message-----
>From: Dale E. Reed Jr. <daler@iea-software.com>
>To: radiusnt@iea-software.com <radiusnt@iea-software.com>
>Date: Thursday, July 20, 2000 2:49 AM
>Subject: Re: [RadiusNT] Auth any user
>
>
>>Andrew Fort wrote:
>>>
>>> That's a typo/translation error (when Dale posted the article referring
>to
>>> the WhatsUpGold testing - which incidentally I cant get his test
strings,
>or
>>> the default ones provided with 4.05, working.. dang).
>>
>>What does RadiusNT in -x25 -X deb8ug mode show for the WUPG test? What
>>strings do you have defined in WUPG?
>>
>>--
>>
>>Dale E. Reed Jr. Emerald and RadiusNT/X
>>__________________________________________
>>IEA Software, Inc. www.iea-software.com
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart