DEFAULT Password = "ANY"
User-Service = Framed-User
(It should read "ANY", i.e,. use the password ANY (in caps, no
quotes) and
any password will be accepted for the username.)
Resp Time: 50 Auth: 0/15 -> 15 Acct: 0/0/0 -> 0
radrecv: Request from host cb2bfa05 code=1, id=145, length=63
User-Name = "darren"
Password = "B"\243*\012\207VQ"
NAS-IP-Address = 203.43.250.5
NAS-Port = 0
NAS-Port-Type = Virtual
User-Service = Login-User
rad_auth(): user_find(darren) error = Neither User Nor Default Name
Authenticate: from 203.43.250.5 - Neither User Nor Default Name: darren
Sending Reject of id 145 to cb2bfa05 (203.43.250.5)
And what's this WUPG ?
-----Original Message-----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Thursday, July 20, 2000 2:49 AM
Subject: Re: [RadiusNT] Auth any user
>Andrew Fort wrote:
>>
>> That's a typo/translation error (when Dale posted the article referring
to
>> the WhatsUpGold testing - which incidentally I cant get his test strings,
or
>> the default ones provided with 4.05, working.. dang).
>
>What does RadiusNT in -x25 -X deb8ug mode show for the WUPG test? What
>strings do you have defined in WUPG?
>
>--
>
>Dale E. Reed Jr. Emerald and RadiusNT/X
>__________________________________________
>IEA Software, Inc. www.iea-software.com
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart