RE: [RadiusNT] Email-Only Filter

Richard Pedersen ( (no email) )
Thu, 15 Jun 2000 08:27:27 -0600

I don't know about the cisco but we have been succusfully using e-mail only
filter on computone and pm3 for quite some time.
E-Mail me off list and I can send the filters we use on those products


> -----Original Message-----
> From:
> []On Behalf Of Adam Greene
> Sent: Wednesday, June 14, 2000 5:14 PM
> To:
> Subject: [RadiusNT] Email-Only Filter
> Hi All,
> I am trying to set up Email Only accounts using RadiusNT
> Framed-Filters. Only 1
> of my 3 NAS's appears to support it, however.
> In checking the IEA mailing list archives, I see Sheryl Stover
> wrote, "most
> NASes won't support" Framed-Filter but "what you can almost
> always do is limit
> certain users to accessing certain IP addresses directly from their
> machine. For example, you could define a filter that allows a
> user to send and
> receive data with the IP address of your mail server, but nothing else,
> therefore creating a mail-only filter." Which Radius attribute
> should be used
> for this kind of filter? And will it require configurations on
> the NAS end as
> well? (I'm running a Cisco AS5200, a Portmaster3, and a
> Computone PowerRack)
> Thanks for your advice,
> Adam
> For more information about this list (including removal) go to:

For more information about this list (including removal) go to: